ONGOING: Big Boy 3x18650 Host $30

ryansoh3 · Sep 16, 2012

hoo7h said:
Its working but when I chose the US nothing appears in the city place.

Also my address is 2 lines, how do I form it to put it in one line.

Sorry for asking a lot

Yeah, that problem arose a while ago but still isn't fixed.

Try your best to cram in your address but Ric will ship to the PP address, so don't worry about it.

Cheers! :beer:

hoo7h · Sep 16, 2012

I paid, please tell him not to ship my host to my paypal address, tell him to ship to the address I provided.

Thank you.

ryansoh3 · Sep 16, 2012

hoo7h said:
I paid, please tell him not to ship my host to my paypal address, tell him to ship to the address I provided.

Thank you.

Ah, gotcha.

I meant what I said except when you specify otherwise. :crackup:

Cheers! :beer:

Kizdawg · Sep 16, 2012

Thanks for this GB! I cant wait to plug this all together..

Euda ya gota make me a heatsink for the sky ray king too... I have some plans to incorporate the tec's and some beam combiners into one of them but I need a heatsink first so I can figure out what exactly I want you to make... ya got a mill too? Bla Bla so I definately need your expertise! PM me...

Comet221 · Sep 17, 2012

hoo7h said:
Thank god, mini heart attack :lol:

Where do they ship the host from ?

btw, Eud is from Croatia and it might take sometime for the heatsink to be shipping to the US, so can I buy the heatsink now ?

Got an email that they're sending mine from Singapore, might be able to get it by the end of the week since Malaysia is right next to Singapore.

op:

ryansoh3 · Sep 17, 2012

Hi guys,

They're about two and a half days left for this GB, and I just want to make sure everyone gets what they want.

Has everyone placed an order on fancyflashlights.com? I only see 14 hosts ordered and I think we need to see 20.

I don't want Eud to make too many and have left heatsink and focus adapters. (Or do you like to keep them in stock?

)

Eud, do you have a preference on how the members should place an order for you? Perhaps PM or google docs?

And are we going to ship them regionally?

Cheers! :beer:

Eudaimonium · Sep 17, 2012

I am fine with whatever you guys want.

I'd prefer to have it done over Google Docs since I assume it'd be more organized that way, and I believe I should be able to add info of my own, what's shipped, what's made etc.

Laser Smith · Sep 17, 2012

Paid up for my host

It might be a few days til I can get more money in my PP for Eud though.. I hope that's ok. Also I have an idea for this host that may be noobish so I want a second opinion if possible. My idea is to mod the battery pack to run two 18650's say 1500mah in parallel to the 3rd 18650 3000mah in series. If I'm correct that would give me 8.4v (fully charged) 3000mah total and the batteries would drain at the same rate correct? Or am I just better off using two 18650's 3000mah in series and deleting the third battery slot? Hell maybe I'll just run 3 in series but I'm trying to get maximum power with as little useless extra heat as possible.

Eudaimonium · Sep 17, 2012

It would be advisable to use the same batteries in parallel, but using different ones isn't a terribly bad idea either.

One with higher capacity won't get discharged all the way, since two weaker ones will be discharged first, but we're still talking 3 18650 cells in parallel and that will last a brutal amount of time anyway.

Laser Smith · Sep 17, 2012

Eudaimonium said:
It would be advisable to use the same batteries in parallel, but using different ones isn't a terribly bad idea either.

One with higher capacity won't get discharged all the way, since two weaker ones will be discharged first, but we're still talking 3 18650 cells in parallel and that will last a brutal amount of time anyway.

But if I combined the 2 1500mah in parallel, and ran those as "one battery" to the third (3000mah) in series don't you think they'd all drain at the same rate?

I drew up a quick sketch of what I'm talking about on my Ipad but managing attachments never works for me..

EDIT: Used ph0t0bucketz (the numbers on the cells are their mah obviously)

Now wouldn't this circuit give me 8.4v and drain the batteries at the same rate? Once again it's probably much simpler to us a dummy and 2 cells at 3000mah but I'd like it to be as heavy and complex as possible

Eudaimonium · Sep 17, 2012

You either have a graphical tablet or a talent to draw natural looking curves with a mouse.

Such a setup could work, but it will be impossible to mod the battery holder to do that.
It's not a standard battery holder.

On one side it has a switch, on another it has both battery terminals ready to connect to the driver.
It's kinda hard to explain, I don't have the host anymore so I can't show you a picture, but Blord or somebody who has the host might post in.

In short, nope, you can't do that. Sorry

Laser Smith · Sep 17, 2012

Ok yeah I've never had this host before so I was just curious. I'll find a nice solution either way I'm sure

It was just a quick sketch on my Ipad using the app, "MyBrushes." Took me like a whole 27 seconds lol

Thanks a lot, +1 for the help :beer:

Blord · Sep 17, 2012

You can change the battery holder from series ( stock ) to parallel configuration. You will have to figured a way between between the plus pole and the minus pole.

I wouldn't do 2 parallel with the third in series. Every time you charge the batteries you need to figured it out how to put them back.
The buck driver will work at 8Volt or 12Volt with even reduced current draw.

Laser Smith · Sep 18, 2012

Blord said:
I wouldn't do 2 parallel with the third in series. Every time you charge the batteries you need to figured it out how to put them back.
The buck driver will work at 8Volt or 12Volt with even reduced current draw.

Yeah that's a good point. I think I'll just go x-drive with 2 or 3 cells in series

Kizdawg · Sep 18, 2012

I'm going to set one up in series for the full 12V. Not sure what I am going to run in the others... I have never run batteries in paralell and serial like that so I cant comment I know my saik running the 3x14500's doesnt work so great with different batteries Crappy run time...

Euda I have gone through the get verified with PP they say it will take 3-5 day's. I dont know why I cant send as a guest to your invoices. It keeps sending me to log in or create a new acct. I sent as a guest on 3 others over the weekend. Dang PayPal... As soon as I can I will send it out.

pocketfluff · Sep 18, 2012

Looks like I'm late to the party!!

Anyway put me down for a heatsink and black host.

I'm going to go ahead and place an order off fancy flashlights now

ONGOING: Big Boy 3x18650 Host $30

ryansoh3

0

hoo7h

0

ryansoh3

0

Kizdawg

0

Comet221

0

ryansoh3

0

Eudaimonium

0

Laser Smith

0

Eudaimonium

0

Laser Smith

0

Eudaimonium

0

Laser Smith

0

Blord

0

Laser Smith

0

Kizdawg

0

pocketfluff

0

Online statistics

Forum statistics

Share this page