LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
Laser Barrels V2. GB. Second run. Kryton Groove
- Thread starter Kenom
- Start date
Kenom
0
- Joined
- May 4, 2007
- Messages
- 5,629
- Points
- 63
Re: Laser Barrels V2. GB. Second run. Kryton Groov
I've never in my life seen a "metal clicky" What are you guys talkin bout?
I've never in my life seen a "metal clicky" What are you guys talkin bout?
- Joined
- Feb 29, 2008
- Messages
- 2,344
- Points
- 0
Re: Laser Barrels V2. GB. Second run. Kryton Groov
instead of a clicky switch, with a rubber tailcap, the whole thing is manufactured out of metal. If you wanted to use the nitecore smartpd system, they are available here separately:
https://www.4sevens.com/product_info.php?cPath=93_97&products_id=553
instead of a clicky switch, with a rubber tailcap, the whole thing is manufactured out of metal. If you wanted to use the nitecore smartpd system, they are available here separately:
https://www.4sevens.com/product_info.php?cPath=93_97&products_id=553
- Joined
- Feb 29, 2008
- Messages
- 2,344
- Points
- 0
Re: Laser Barrels V2. GB. Second run. Kryton Groov
and also, will the non-custom barrels be adonised more quickly than the marble and fade ones were?
and also, will the non-custom barrels be adonised more quickly than the marble and fade ones were?
Kenom
0
- Joined
- May 4, 2007
- Messages
- 5,629
- Points
- 63
Re: Laser Barrels V2. GB. Second run. Kryton Groov
Oh hell yeah! Instead of doing them one at a time, they just do them as a batch in one tank. Means all of them done at the same time instead of one at a time. We really havn't got that many left until we are at that point.
robjdixon said:
Oh hell yeah! Instead of doing them one at a time, they just do them as a batch in one tank. Means all of them done at the same time instead of one at a time. We really havn't got that many left until we are at that point.
- Joined
- Feb 29, 2008
- Messages
- 2,344
- Points
- 0
Re: Laser Barrels V2. GB. Second run. Kryton Groov
cool - so are you expecting to have them all in your hands in a couple of weeks?
cool - so are you expecting to have them all in your hands in a couple of weeks?
Kenom
0
- Joined
- May 4, 2007
- Messages
- 5,629
- Points
- 63
Re: Laser Barrels V2. GB. Second run. Kryton Groov
Ya know I've no clue. I figured it was going to take 3 weeks no more to anodize the barrels. We are now at around 6 weeks. So the last thing I want to do is throw out a time frame and have it yet again exceeded.
I have to yet again apologize to all those still waiting for barrels. It seems that there is nothing more than 1 delay after another. This one at least is winding down to a conclusion slowly.
Ya know I've no clue. I figured it was going to take 3 weeks no more to anodize the barrels. We are now at around 6 weeks. So the last thing I want to do is throw out a time frame and have it yet again exceeded.
I have to yet again apologize to all those still waiting for barrels. It seems that there is nothing more than 1 delay after another. This one at least is winding down to a conclusion slowly.
marks47
0
- Joined
- Sep 18, 2007
- Messages
- 114
- Points
- 0
Re: Laser Barrels V2. GB. Second run. Kryton Groov
Nah, I was looking at the PDF and instructions here:
http://hacylon.case.edu/laser/lavadrive1/
I suspected that the out side was the one with C1 and the diode, and the in was near the regulator and pot, but it just didn't work. I may order another one. I need to re-budget some things before I do. I'll probably get an 803t with it, but I really don't want anything too dangerous. I was really asking how LOW I can set it...
I will probably set it as low as it will go and still be lasing.
Are you referring to a picture that shows this???
IMG
Nah, I was looking at the PDF and instructions here:
http://hacylon.case.edu/laser/lavadrive1/
I suspected that the out side was the one with C1 and the diode, and the in was near the regulator and pot, but it just didn't work. I may order another one. I need to re-budget some things before I do. I'll probably get an 803t with it, but I really don't want anything too dangerous. I was really asking how LOW I can set it...
I will probably set it as low as it will go and still be lasing.
Are you referring to a picture that shows this???
IMG
Kenom
0
- Joined
- May 4, 2007
- Messages
- 5,629
- Points
- 63
Re: Laser Barrels V2. GB. Second run. Kryton Groov
Wow dan thanks for sharing that. Not only do we get an opportunity to see size comparison, but we get to see a starkly beautiful laser!!! now for the gratuitous request.
BEAMSHOTS!!!!!!
what's the camera your using to take that picture and it's amazing.
Wow dan thanks for sharing that. Not only do we get an opportunity to see size comparison, but we get to see a starkly beautiful laser!!! now for the gratuitous request.
BEAMSHOTS!!!!!!
what's the camera your using to take that picture and it's amazing.
Re: Laser Barrels V2. GB. Second run. Kryton Groov
When I took the dog out to p after posting that 1 pic, I thought about trying for a beamshot, because there was a slight haze in the air - but did you see the time I posted that? I needed sleep worse than you need a beamshot (I think). But I will try for one tonight!
DanQ
Canon A640...Kenom said:
When I took the dog out to p after posting that 1 pic, I thought about trying for a beamshot, because there was a slight haze in the air - but did you see the time I posted that? I needed sleep worse than you need a beamshot (I think). But I will try for one tonight!
DanQ
VW
0
- Joined
- Mar 1, 2008
- Messages
- 577
- Points
- 0
Re: Laser Barrels V2. GB. Second run. Kryton Groov
Hey man, just to let you know I recieved my barrel the other day. Everything looks cool, colour was a bit lighter than i expected, but it looks nice. Can't wait to put it together...
Hey man, just to let you know I recieved my barrel the other day. Everything looks cool, colour was a bit lighter than i expected, but it looks nice. Can't wait to put it together...
artix
0
- Joined
- May 24, 2008
- Messages
- 994
- Points
- 0
Re: Laser Barrels V2. GB. Second run. Kryton Groov
What is the difference?
stealle said:
What is the difference?
Kenom
0
- Joined
- May 4, 2007
- Messages
- 5,629
- Points
- 63
Re: Laser Barrels V2. GB. Second run. Kryton Groov
Well, I can tell you one thing about anodizing. If you want HA-III you CANNOT have custom colors. The process instead of being hot anodizing solution has to be chilled and takes A LOT longer. Not to mention the whole process doesn't lend to customizing because of the time frame and the method that it is anodized. So these are HA-II
The difference between the two, other than the method for anodizing, is the hardness and thickness of the anodized layer. HA-III is a LOT harder and tends to last a lot longer.
stealle said:
Well, I can tell you one thing about anodizing. If you want HA-III you CANNOT have custom colors. The process instead of being hot anodizing solution has to be chilled and takes A LOT longer. Not to mention the whole process doesn't lend to customizing because of the time frame and the method that it is anodized. So these are HA-II
The difference between the two, other than the method for anodizing, is the hardness and thickness of the anodized layer. HA-III is a LOT harder and tends to last a lot longer.
VW
0
- Joined
- Mar 1, 2008
- Messages
- 577
- Points
- 0
Re: Laser Barrels V2. GB. Second run. Kryton Groov
I was wondering, did you ever put out instructions on how it's all put together? I'll save the more annoying questions for when I get round to doing it, but it would be interesting to look over if you have.
Oh, also, what happened to the logo idea? Did it not go ahead?
Looks great though, a lot smaller than I had expected. Will deffinately do an 803T justice...
I was wondering, did you ever put out instructions on how it's all put together? I'll save the more annoying questions for when I get round to doing it, but it would be interesting to look over if you have.
Oh, also, what happened to the logo idea? Did it not go ahead?
Looks great though, a lot smaller than I had expected. Will deffinately do an 803T justice...
