Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

INTEREST GAUGE for PHAZOR Diodes -- 200mW CW!!!

Gazoo

0
Joined
Jun 9, 2007
Messages
3,206
Points
38
Re: INTEREST GAUGE for PHAZOR Diodes -- 200mW CW!!

Daedal,
Have you tested the aixiz diode yet???? Thanks... :)
 





Joined
Nov 11, 2007
Messages
24
Points
0
Re: INTEREST GAUGE for PHAZOR Diodes -- 200mW CW!!

thanks, trying to get my parent to let me get it, they say that lasers are dangorous, any tips on proving them otherwise? I mean I'd get safty gogles
 

Daedal

0
Joined
May 23, 2007
Messages
2,277
Points
0
Re: INTEREST GAUGE for PHAZOR Diodes -- 200mW CW!!

Gazoo said:
Daedal,
Have you tested the aixiz diode yet???? Thanks... :)

Anxiously looking forward to the results of that test myself as well... will let you all know as soon as it happens. :-[

--DDL
 

Daedal

0
Joined
May 23, 2007
Messages
2,277
Points
0
Re: INTEREST GAUGE for PHAZOR Diodes -- 200mW CW!!

guyfrom7up said:
thanks, trying to get my parent to let me get it, they say that lasers are dangorous, any tips on proving them otherwise? I mean I'd get safty gogles

I think this was discussed previously in the General section... Honesty and understanding is the best way ;)

--DDL
 
Joined
Oct 26, 2007
Messages
5,438
Points
83
Re: INTEREST GAUGE for PHAZOR Diodes -- 200mW CW!!

guyfrom7up said:
thanks, trying to get my parent to let me get it, they say that lasers are dangorous, any tips on proving them otherwise? I mean I'd get safty gogles

Pull the ol' "education" bit on them, showing that you'll become a bright young electrical engineer with what you're going to learn. You'll be making circuits, using optics, and of course you'll be working with lasers. Of course remember to tell them you'll be using goggles so that your eyes will be protected, and make sure they know that you know about not shining these things out doors or in places where you (they) could be liable. That way they know you already know the responsibilities.
 
Joined
Aug 16, 2007
Messages
241
Points
0
Re: INTEREST GAUGE for PHAZOR Diodes -- 200mW CW!!

Wow - 'we still stuck at 21 commits on this GB?
 
Joined
Aug 21, 2007
Messages
58
Points
0
Re: INTEREST GAUGE for PHAZOR Diodes -- 200mW CW!!

This is great DDL! Umm... Reserve a spot for me please... I don't know if I'll commit to it, but the chances are good... Maybe change the list to 21.5 commits. :D
 
Joined
Nov 11, 2007
Messages
24
Points
0
Re: INTEREST GAUGE for PHAZOR Diodes -- 200mW CW!!

I'm 70% sure I can do this, I'll update later, my dad isn't really giving me a yes or a no, and he's on a business trip, coming back in a couple of days... Don't add me to the list yet.
 

Jaeger

0
Joined
Nov 9, 2007
Messages
27
Points
0
Re: INTEREST GAUGE for PHAZOR Diodes -- 200mW CW!!

Looks like he hasn't updated the list in a bit. I'm not in there atleast.

EDIT: looks by my count to be at about 27.5
 

Daedal

0
Joined
May 23, 2007
Messages
2,277
Points
0
Re: INTEREST GAUGE for PHAZOR Diodes -- 200mW CW!!

Not much interest yet to get it to where the price would drop... If anything real happen, you'll know about it ahead of time ;)

--DDL
 
S

SenKat

Guest
Re: INTEREST GAUGE for PHAZOR Diodes -- 200mW CW!!

NOT being argumentative, but I fail to see the value point of these diodes :( DDL - you KNOW I am not trying to sabotage, it is just simply that there is not enough known about these things to validate spending that kinda cash on a diode in my book. No data / spec sheet from the actual manufacturer, only the results of limited testing done by you. I am NOT knocking your testing, etc - but seriously - you are one person, testing a tiny quantity of diodes. I just really do not see how the company you are dealing with can be so demanding on the price point when they do not know shit about the diodes ! Hopefully nobody will read this, and think I am slamming DDL or anyone else - Okay, maybe that is a lie, I think I am slammin the diodes themselves - out of frustration for not having enough information about the damned things to make an informed decision. In all honesty, if there was a spec sheet for these, you know, that was written by the actual manufacturer, etc.....and had hard data, specs, etc - and they were STILL $40 something ? They would still be way too expensive for me - but I would at least understand the infatuation with some of you and the idea of these diodes, as it stands - I do not understand at all. No offense intended to anyone, I assure you !
 
Joined
Aug 16, 2007
Messages
241
Points
0
Re: INTEREST GAUGE for PHAZOR Diodes -- 200mW CW!!

OK Senkat - you talked me out of it.
Just ordered one of your 16x diodes for my portable and I'll use my open-can for the extreme TEC stuff.
Sorry to bail out of the GB but I'm tired of tying up this budgeted $$.
 

jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
Re: INTEREST GAUGE for PHAZOR Diodes -- 200mW CW!!

I'm still in DDL...for 2 even! Although I do like the Senkat diodes. And Greg's prices and service can't be beat, but I already have 3 of those! I want to try the other ones too...So, I hope there is still enough interest!
Jay
 

Daedal

0
Joined
May 23, 2007
Messages
2,277
Points
0
Re: INTEREST GAUGE for PHAZOR Diodes -- 200mW CW!!

SenKat said:
NOT being argumentative, but I fail to see the value point of these diodes :( DDL - you KNOW I am not trying to sabotage, it is just simply that there is not enough known about these things to validate spending that kinda cash on a diode in my book. No data / spec sheet from the actual manufacturer, only the results of limited testing done by you. I am NOT knocking your testing, etc - but seriously - you are one person, testing a tiny quantity of diodes. I just really do not see how the company you are dealing with can be so demanding on the price point when they do not know shit about the diodes ! Hopefully nobody will read this, and think I am slamming DDL or anyone else - Okay, maybe that is a lie, I think I am slammin the diodes themselves - out of frustration for not having enough information about the damned things to make an informed decision. In all honesty, if there was a spec sheet for these, you know, that was written by the actual manufacturer, etc.....and had hard data, specs, etc - and they were STILL $40 something ? They would still be way too expensive for me - but I would at least understand the infatuation with some of you and the idea of these diodes, as it stands - I do not understand at all. No offense intended to anyone, I assure you !

I agree with you SenKat. I have bashed the supplier with the same questions repeatedly and still am in frequent contact with them about the datasheet and/or a manufacturer to refer to! The price is too high for these... and no matter how I try to drop it down, they are firm on the price.

I will honestly try to knock it down as much as I can, and pass it all you all... I only need to know what these diodes can do, and something or the other from the manufacturer before I commit myself to a GB on the order of $40+ a pop! :-/

--DDL
 

Daedal

0
Joined
May 23, 2007
Messages
2,277
Points
0
Re: INTEREST GAUGE for PHAZOR Diodes -- 200mW CW!!

jayrob said:
I'm still in DDL...for 2 even! Although I do like the Senkat diodes. And Greg's prices and service can't be beat, but I already have 3 of those! I want to try the other ones too...So, I hope there is still enough interest!
Jay

Jay, with the current amount of orders, I don't have a bargaining chip to throw in their face... If I were to be ordering 100+ units, I could demand my own price to some point... I could go ahead and stat this GB with the 20-some orders we have if that is what needs to be done. :-?

--DDL
 
S

SenKat

Guest
Re: INTEREST GAUGE for PHAZOR Diodes -- 200mW CW!!

DDL - I REALLY hope you do not think I am being a stick in teh mud, and if I AM - then I am sorry :( Definitely not trying to screw up a GB, ordinarily I would chip in just to chip in (like with the beta test of these diodes) but...meh - I said it all in teh other post :p Anywho, hope there's no bad feelings anywhere :-/
 




Top