Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

GGW SLED GB & PHR's & LPC's as low as $12 ea.!

Joined
Jun 28, 2007
Messages
3,443
Points
63
GGW SLED GB & PHR's & LPC's as low as $12 ea.!

I was wondering if there are other folks among us who want sleds or just the diodes. *I believe only 60 50 GGW-H20L will be available. *These have been offered, and would be this price only if ordered, (shipped with tracking, [Paypal fees additional, it's a GB and there is not profit, so I need PP fees if PP is used, there may be other ways to pay though]), in the ConUS, (International orders will cost ~ $27.15 more for tracking and insurance, or at your own risk for ~ $2 additional on the ConUS cost), *if, (sent anywhere), you want 4+, there is a slight reduction, (about $1 each I think). *I will list those interested or let me know and I'll hold a place as anonymous if you prefer. * Last I heard, the GGW, (6X) were hard to find...

PHR-803T: 12.00
LPC-815: * 12.00
GGW-H20L: 70.00

Axixz Modules 4 ea. * (If the diode is harvested and pressed in $5 ea.)

Totals so far....
Total PHR's ** *80 ordered ( buying 100 total between LPC's & PHR's plenty ava.) *(36 sold to members)
Total GGW's **(All 50 taken) *([highlight]The REAL 6X[/highlight], accept no substitute! *[highlight]Sorry, very few are still ava.[/highlight])
Total LPC-815 * 50 ordered * *(~23 sold to members)
Total Axixz Modules 30

rckstr* 5 GGW PAID Shipped
Phorz* 1 GGW PAID Shipped
scopeguy20 * 5 GGW 47 PHR 5 LPC PAID Shipped
Ludwig Van* 2 GGW 2 Axixz Modules *PAID Shipped
LasersBee* 2 GGW PAID Shipped
John Lawson* 1 GGW 1 PHR 1 LPC PAID Shipped
Blu-Ray_Junkie* 1 GGW send to JL PAID Shipped
Miloš* 4 GGW 2 LPC PAID Shipped
Gata* 1 GGW 3 Axixz Modules PAID Shipped
Eku* 1 GGW 2 PHR 2 Axixz *Modules *GGW diodes pressed in PAID Shipped
ff-racer* 2 GGW PAID Shipped
XCreedX* 1 GGW 1 PHR 2 Axixz Modules PAID Shipped
noop* 1 GGW PAID
XerO* 1 GGW 1 PHR 1 LPC all 4 in Axixz modules in EU PAID Shipped
jayrob* 2 GGW 3 LPC PAID Shipped
Alx* 2 GGW int'l w/ ins PAID Shipped
Dark_Horse* 1 GGW 1 PHR PAID Shipped
quantile* 1 GGW 2 PHR PAID Shipped
dr-ebert* 1 GGW 2 PHR 2 LPC 2 Aixiz modules PAID shipped (mostly)
potatoerage* 1 GGW PAID Shipped
icecruncher* 4 PHR PAID Shipped
Alexizupinhea* 3 PHR 2 LPC PAID Shipped
Bob Boyce* 2 GGW 6 PHR 4 LPC PAID Shipped
Vmods* 4 PHR 8 Axixz Modules PAID Shipped
Coldstl* 1 GGW PAID Shipped
Warske* 2 PHR 2 LPC PAID Shipped
ElektroFreak* 1 GGW 3 PHR PAID Shipped
letzroc* 3 PHR 1 LPC PAIShippedD Shipped
gbl* 1 GGW Shipped
daguin* 4 GGW BTW, picked up *by a name means Shipped! THANKS All!

Spyderz20x6 1 GGW
IgorT 3 GGW



[highlight] It's like, After the GB prices now, 1 GGW still available and many PHR's & LPC's now selling cost is only a little more! * GGW's $70 ea. & PHR or LPC $12 ea. *in ConUS (if paid by PP fee applies to buyer)[/highlight]

btw, these PHR's & LPC's have great diodes too! *The picture below is a PHR, and a comparable diode to the LPC's red diode!
 

Attachments

  • Red_and_Violet_Doorcy_Jrs_on_coffee_table_with_fog.JPG
    Red_and_Violet_Doorcy_Jrs_on_coffee_table_with_fog.JPG
    201.1 KB · Views: 713
Last edited:





Re: SLED & Diode GB Feeler

Your supplier = My supplier ;)

Are you able to send to the UK? Also, any idea on the numbers needed to meet these prices?
 
Re: SLED & Diode GB Feeler

Thanks for the post CB.  I was not told of a minimum, I need to buy 100 minimum between the LPC's & PHR's but we are getting 40+ GGW.  My earlier orders were far larger, >200 sleds.   ;)

And, yeah, I can send to GB, it is just a $ or 2 more and the package is small unless you want many.
 
Re: SLED & Diode GB Feeler

I'll be up for some GGW-H20Ls, at least 5.
 
Re: SLED & Diode GB Feeler

For the SF-AW210 Diodes, how are they sent? (i.e in heatsink with pcb, bare)
 
Re: SLED & Diode GB Feeler

robjdixon said:
For the SF-AW210 Diodes, how are they sent? (i.e in heatsink with pcb, bare)

Going by the pictures I was sent, in the heat sink with the ribbon unsoldered, thanks for asking!

UPDATE< I ordered all as full sleds, if you asked for diodes harvested, I'll get those to you harvested and use all ESD safe methods and equipment, and place in ESD safe bags for shipping. If you want the sleds, be sure I know this. I'll mark it in my shipping notes. Thanks All!   :)  -Glenn
 
Re: SLED & Diode GB Feeler

Please include me for 2 GGW-H20L sleds.

TW
 
Re: SLED & Diode GB Feeler

Yeah... I could use at least 1 GGW-H20L sled...

BTW... who unsoldered the ribbon cable... :-? :-?

Jerry
 
Re: SLED & Diode GB Feeler

I am pretty sure they just cut the ribbon, snap off the glue and send as-is in an anti-static bag, but we don't know if they were ESD-safe or what they did to them beyond this...
 
Re: SLED & Diode GB Feeler

charlie bruce said:
I am pretty sure they just cut the ribbon, snap off the glue and send as-is in an anti-static bag, but we don't know if they were ESD-safe or what they did to them beyond this...

Not crazy about that........... so far all the sleds I've receive (any type) have had the LD ribbon
intact and attached to the PCB.... :-? :-? :-? :-?
I guess we need some guinea pigs to test a few... ::)

Jerry
 
Re: SLED & Diode GB Feeler

I will probably be down for 20 GGW's granted its the entire sled, unmolested :P
 
Re: SLED & Diode GB Feeler

WannaBurn said:
I will probably be down for 20 GGW's granted its the entire sled, unmolested :P

A good idea IMHO they may be safer that way.
 
Re: SLED & Diode GB Feeler

the elusive ggw for me please just one though :'( kinda want to not get kicked out of my home again :D

complete sled please
 
Re: SLED & Diode GB Feeler

John Lawson said:
the elusive ggw for me please just one though :'( kinda want to not get kicked out of my home again :D

complete sled please
Reminds me of this video.. :P THE DEDICATION!!
[media]http://www.youtube.com/watch?v=Yn-q4dakss0[/media]
 


Back
Top