Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

GB: 2$ copper modules ALL SIZES CLOSED

M

Machinist Joe

0
Joined
Jan 1, 2012
Messages
462
Points
18
Like I have said before, If dtr would like to sell me all the modules he got, I can shorten all of them easily.

Also, I think we should triple check how much we are actually going to take off of these. DTR do you have a dial caliper? We could measure the height from the bottom of the bore (bottom of where the lens screws in) to the top (where the focus adapter sits, and then do the same for a standard aixiz and know exactly how much to take off.

I don't want us to go too small after being too big...
 





ped

ped

0
Joined
Nov 25, 2008
Messages
4,889
Points
113
tsteele93 said:
:)



I have a brass Aixiz 9mm I can send you if it will work. It's gonna cost you though, $0 and one "pay it forward." ;)
Click to expand...


Whooosh....straight over my head :crackup:

Explain, PM if you want haha dont wanna derail the thread.
 
tsteele93

tsteele93

0
Joined
Dec 27, 2011
Messages
2,062
Points
48
ped said:
Whooosh....straight over my head :crackup:

Explain, PM if you want haha dont wanna derail the thread.
Click to expand...

I'll send you a 9mm Aixiz module for free. Just do something nice for someone else when you have the chance sometime in the future. That is the "pay it forward.". :)
 
AnthoT

AnthoT

0
Joined
Jan 14, 2012
Messages
2,133
Points
48
Thanks for everyone's patience :beer: I'm doing my best to fix this and I'm sure it will turn out great! Hopefully not too long of a delay as well
 
ped

ped

0
Joined
Nov 25, 2008
Messages
4,889
Points
113
tsteele93 said:
I'll send you a 9mm Aixiz module for free. Just do something nice for someone else when you have the chance sometime in the future. That is the "pay it forward.". :)
Click to expand...

Sounds like a deal to me :beer:
 
AnthoT

AnthoT

0
Joined
Jan 14, 2012
Messages
2,133
Points
48
tsteele93 said:
I think that I need the std sizes as well, but I would be willing to also buy some of the long versions as well. That way I could help cut your losses AND I could use the long ones on low power builds where an acrylic lens would be ok.

Is there a way to just order some of the "longs?"

The 445 single modes are 3.8mms, right?

:)



I have a brass Aixiz 9mm I can send you if it will work. It's gonna cost you though, $0 and one "pay it forward." ;)
Click to expand...

Thats very kind of you tseele I'm sure ped appreciates it, its a great way of paying it forward :beer: i'd +rep you but the system said no

If you'd like long modules let DTR know, he's got them all


Machinist Joe said:
Like I have said before, If dtr would like to sell me all the modules he got, I can shorten all of them easily.

Also, I think we should triple check how much we are actually going to take off of these. DTR do you have a dial caliper? We could measure the height from the bottom of the bore (bottom of where the lens screws in) to the top (where the focus adapter sits, and then do the same for a standard aixiz and know exactly how much to take off.

I don't want us to go too small after being too big...
Click to expand...
Its a very kind offer thank you :beer: the only issue i see is then after you machine them down the threading will be a bit messed up.... Its a kind offer and i appreciate it very much :beer: i'd +rep you but i can't as i recently did (for the spreadsheet) and the system said no
 
Last edited:
tsteele93

tsteele93

0
Joined
Dec 27, 2011
Messages
2,062
Points
48
ped said:
Sounds like a deal to me :beer:
Click to expand...

AND... I just noticed you are in the UK. I can still send it free, but I don't know how long it takes. I don't know how much faster it will get there vs waiting for the copper modules.

The offer still stands though, PM me your address and I will drop one in the mail tomorrow. I sent something to Blord once and it wasn't expensive at all.

:)
 
AnthoT

AnthoT

0
Joined
Jan 14, 2012
Messages
2,133
Points
48
:D:D:D

Guess what :D

they can be all fixed and shipped by the end of the week!!! :wave:

We have also reordered all the 3.8 & 9mm for the US in correct sizing :D

I still apologize for the delay... i really didn't want to have any issues but its been solved and confirmed

:thanks: for everyones patience
 
Last edited:
kiyoukan

kiyoukan

0
Joined
Oct 24, 2009
Messages
2,555
Points
48
if those ones that dtr has needed to be changed let me know i got my lathe and i can rig up a quick way to take that 4mm off.
 
AnthoT

AnthoT

0
Joined
Jan 14, 2012
Messages
2,133
Points
48
kiyoukan said:
if those ones that dtr has needed to be changed let me know i got my lathe and i can rig up a quick way to take that 4mm off.
Click to expand...

I dont know what will happen to those.... It's up to DTR, we have a new batch coming in so maybe those could still be sold as a fixed focus heatsink for a pen build or a labby fixed focused module
 
bennett326

bennett326

0
Joined
May 10, 2011
Messages
1,878
Points
48
if you have any long ones 5.6mm you want to sell i will take a few these are perfect for labbies you could sell a bunch on PL with out a doubt :beer:
 
AnthoT

AnthoT

0
Joined
Jan 14, 2012
Messages
2,133
Points
48
bennett326 said:
if you have any long ones 5.6mm you want to sell i will take a few these are perfect for labbies you could sell a bunch on PL with out a doubt :beer:
Click to expand...

DTR's got quite a few 3.8mm & 9mm left ;) from what I know only about ~30 sold so far but those Id assume are all available for sale to anyone :D
 
Last edited:
kiyoukan

kiyoukan

0
Joined
Oct 24, 2009
Messages
2,555
Points
48
well those ones dtr has are 3.8 and 9mm not many lab styles for those.
Thinking if im going to put them on my lathe i would just make them 5.6mm diode holders.
Well its up to DTR and you
 
AnthoT

AnthoT

0
Joined
Jan 14, 2012
Messages
2,133
Points
48
kiyoukan said:
well those ones dtr has are 3.8 and 9mm not many lab styles for those.
Thinking if im going to put them on my lathe i would just make them 5.6mm diode holders.
Well its up to DTR and you
Click to expand...

I'll leave that up to DTR, he has the modules with him and if you'd like you can contact him for them, machine them to 5.6mm if you'd like and use them, but that's up to you. If you wanted them then DTR definetly has enough on him at this moment.
 
You must log in or register to reply here.




Top