Laser pointer discussion. Read/write reviews of laser pointers and laser pointer companies. Learn about all types of laser pointers and lasers





Welcome to Laser Pointer Forums! If you are looking for a laser pointer or want to compare different laser pointer companies, you may want to check out the LPF Laser Pointer Company Database. The link will open in a new window for your convenience.








Green Laser Pointers by Category Blue Laser Pointers by Category Red Laser Pointers by Category
Yellow Laser Pointers by Category Violet Laser Pointers by Category Orange Laser Pointers by Category
Top Laser Pointers by Power - 1 Watt+ Top Laser Pointers by Power - 500mW+ Top Laser Pointers by Power - 250mW+
Laser Pointer Database High Power Laser Pointers Laser Pointer Diodes
Laser Technology Laser Pointer Parts Lasers by Wavelength
Top 10 Laser Pointer Companies Laser Pointer Company Database Visible Beam Laser Pointers


One laser store meets all your needs

























Go Back   Laser Pointer Forums - Discuss Laser Pointers > Lasers > Group Buys



LPF List of Laser Pointer Companies (link opens new window)



Reply
 
LinkBack Thread Tools Display Modes
Old 05-22-2013, 04:55 AM #129
JETLASERS's Avatar
Class 2 Laser
 
Join Date: Aug 2010
Location: Northern China
Posts: 354
Rep Power: 897
JETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond repute
Send a message via Skype™ to JETLASERS
JETLASERS JETLASERS is offline
Class 2 Laser
JETLASERS's Avatar
 
Join Date: Aug 2010
Location: Northern China
Posts: 354
Rep Power: 897
JETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond repute
Send a message via Skype™ to JETLASERS
Default Re: GB#1st of PL-E Pro Lasers and PL-E 2.0/3.0 Clearance - May 2013

Quote:
Originally Posted by lonepine View Post
Either your camera takes great shots, or that is a nice, richly colored beam of 532nm goodness! I am now
Even more excited to get mine! Is the lpm you referenced from gray, hak, or your own? Im just curious... congrats buddy, that pro is a fine lookin lady! Are you happy with it overall?

Hak, if you got your ears on; did you happen to get those nitecores in? I would like to protect my brothers home from potential lithium apocalypse...and if you have some decent goggles for sale (532 nm) i would love to add these items to my happy little package. If i'm out of line here, p.m me a picture of your middle finger if not, p.m. me a price and ill poo pal it to you.
Okay buddy - will add a pair of safety glasses for protection from 445nm and 532nm!~ I will also include a power graph with the laser shipment - sure the testing result might vary when Hak receives and tests it.


__________________
Gray from JETLASERS.COM and Laser Shop at JETLASERS.ORG. Pls Email me at jetlasers@gmail.com. Or you can also text me at support@jetlasers.com with iMessage if you use iPhone/iPad/iPod.
Prepare your goggles. safety comes first.
JETLASERS is offline   Reply With Quote







LPF List of Laser Pointer Companies (link opens new window)







Old 05-22-2013, 12:20 PM #130
SixTee9's Avatar
Class 2M Laser
 
Join Date: Jan 2013
Location: Newport News, VA
Posts: 506
Rep Power: 93
SixTee9 has a reputation beyond reputeSixTee9 has a reputation beyond reputeSixTee9 has a reputation beyond reputeSixTee9 has a reputation beyond reputeSixTee9 has a reputation beyond reputeSixTee9 has a reputation beyond reputeSixTee9 has a reputation beyond reputeSixTee9 has a reputation beyond reputeSixTee9 has a reputation beyond reputeSixTee9 has a reputation beyond reputeSixTee9 has a reputation beyond repute
SixTee9 SixTee9 is offline
Class 2M Laser
SixTee9's Avatar
 
Join Date: Jan 2013
Location: Newport News, VA
Posts: 506
Rep Power: 93
SixTee9 has a reputation beyond reputeSixTee9 has a reputation beyond reputeSixTee9 has a reputation beyond reputeSixTee9 has a reputation beyond reputeSixTee9 has a reputation beyond reputeSixTee9 has a reputation beyond reputeSixTee9 has a reputation beyond reputeSixTee9 has a reputation beyond reputeSixTee9 has a reputation beyond reputeSixTee9 has a reputation beyond reputeSixTee9 has a reputation beyond repute
Default Re: GB#1st of PL-E Pro Lasers and PL-E 2.0/3.0 Clearance - May 2013

Thanks and +1 for you Gray
__________________
405nm - 86mw pen
445nm - 3.4w - C11
445nm - 2.6W - Black Ice by ApexProxy
532nm - 68mw pen
638nm - 1.3w @ 1.4a C8
650nm - 121mw pen

(Playstation 4) 'PSN' is SixTee9 - (add me)
SixTee9 is offline   Reply With Quote
Old 05-22-2013, 08:02 PM #131
Junior Member
 
Join Date: Oct 2012
Location: Bend, Oregon
Posts: 12
Rep Power: 0
lonepine has much to be proud oflonepine has much to be proud oflonepine has much to be proud oflonepine has much to be proud oflonepine has much to be proud oflonepine has much to be proud oflonepine has much to be proud oflonepine has much to be proud oflonepine has much to be proud of
lonepine lonepine is offline
Junior Member
 
Join Date: Oct 2012
Location: Bend, Oregon
Posts: 12
Rep Power: 0
lonepine has much to be proud oflonepine has much to be proud oflonepine has much to be proud oflonepine has much to be proud oflonepine has much to be proud oflonepine has much to be proud oflonepine has much to be proud oflonepine has much to be proud oflonepine has much to be proud of
Default Re: GB#1st of PL-E Pro Lasers and PL-E 2.0/3.0 Clearance - May 2013

Gray! you clever dog! Your smiley leads me to believe that you dont' think i have safety glasses..you're only half correct. I have decent goggles for my 445nm ( i gave them to my brother until his arrive from sleaze-bay), i don't have nice goggles for the 532 Pro i am about to get my eager hands on. I only know what i read in this forum, and although the goggles i already have should protect any wavelength from 100-490nm..i don't think they have great IR filtering, I may be wrong, but doesn't a 500mw dpss 532nm have a decent amount of "invisible damage byproduct" to consider? I am perfectly prepared to be called a "noob" if this is wrong...just trying to keep my peepers in playing shape!

Anyway, i hope everything is fulfilling and happy for you over there in your homeland Gray! I'll talk to you soon!

p.s. does JL have any tripods (clamps) back in stock that would be good for the PRO's? if so, i will buy one

Carsen
lonepine is offline   Reply With Quote
Old 05-23-2013, 04:50 PM #132
Smeerworst's Avatar
Class 3R Laser
 
Join Date: Mar 2011
Posts: 1,633
Rep Power: 329
Smeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond repute
Smeerworst Smeerworst is offline
Class 3R Laser
Smeerworst's Avatar
 
Join Date: Mar 2011
Posts: 1,633
Rep Power: 329
Smeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond repute
Default Re: GB#1st of PL-E Pro Lasers and PL-E 2.0/3.0 Clearance - May 2013

omg omg

My PL-E Pro 800 arrived Today!
It's a BEAST! Really love the host and the buttons and LED's on it

Woohoo.. thank you gray! and the rest over at Jetlasers

I'm charging my fresh new 26650 cells now

Did a quick on/off and it works..
Gone meter it when battery's are charged.

Woohoo

Hooked it up with wall plug *saw it peak over 1W (>1066mW) !!!! and stay's pritty close to it.
Omg omg

Host does get very warm

Cheers, Sm.
__________________
Too much to list.
Lazeerer custom polished L6 porcupine build 3.8mm 405nm 1W
Dragonlaser Spartan 405nm 300mW Polished
SKYlasers HL405 405nm 550mW
2×WLasers Sonar Elite Pro 3×Sonar white
2×Dragonlaser Spartan 447nm 1.1W with Beam Expander
TrustFire Cree Z5 2W+ 445nm Custom build
Blord build Big Boy 3W 445nm
Wicked Lasers S3 Arctic 445nm 2W 1.25 etc
Ultrafire C3 host Osram 450nm 180mW single mode
Optotronics RPL-B 473nm peak@112mW viasho upgraded
3XWLasers S3 473nm portable 112mW LE 1×S2
473nm >300 Lab laser
1.4W 520nm - The Hulk - MS-SSW-II Custom Direct Green DTR
SKYlasers PL520 520nm 80mW
Laserglow Hercules-650 532nm 850mW 777mW avg
Optotronics 450 RPL-G 532nm >570mW peak
Wicked Lasers Krypton 1W 532nm avg 997mW pk 1268mW
Jetlasers PL-E Pro >800mW
Laserglow Rigel HV PRO-50 589nm 95.1mW
CNI PGL III C >80mW 589nm
LaserGlow Rigel 6 593.5nm 8mW
Wicked Lasers Spyder II RX (Limited Edition, >300mW) 600mW peak
RHD build SH-032 host 635nm 500mW
RHD build Red Bulldog 638nm 1W+
Dragonlaser Spartan 640nm 100mW
SKYlasers PL650 650nm 1W
RGB and RGY Scanner 1.5W
Flashlights: HID Polarion PH-40, LED Olight SR-90

Last edited by Smeerworst; 05-23-2013 at 05:07 PM.
Smeerworst is offline   Reply With Quote
Old 05-23-2013, 05:07 PM #133
JETLASERS's Avatar
Class 2 Laser
 
Join Date: Aug 2010
Location: Northern China
Posts: 354
Rep Power: 897
JETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond repute
Send a message via Skype™ to JETLASERS
JETLASERS JETLASERS is offline
Class 2 Laser
JETLASERS's Avatar
 
Join Date: Aug 2010
Location: Northern China
Posts: 354
Rep Power: 897
JETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond repute
Send a message via Skype™ to JETLASERS
Default Re: GB#1st of PL-E Pro Lasers and PL-E 2.0/3.0 Clearance - May 2013

Quote:
Originally Posted by Smeerworst View Post
omg omg

My PL-E Pro 800 arrived Today!
It's a BEAST! Really love the host and the buttons and LED's on it

Woohoo.. thank you gray! and the rest over at Jetlasers

I'm charging my fresh new 26650 cells now

Did a quick on/off and it works..
Gone meter it when battery's are charged.

Woohoo

Hooked it up with wall plug *saw it peak over 1W (>1066mW) !!!! and stay's pritty close to it.
Omg omg

Host does get very warm

Cheers, Sm.
Glad it finally arrived after the long waiting.
The Laserbee LPM video for the laser is here: PL-E Pro 800mw green laser at 532nm - LPM - YouTube It hits high but drops also fast - sure it might perform a bit better if it is fixed on a tripod.

Will talk soon - have a nice day!
__________________
Gray from JETLASERS.COM and Laser Shop at JETLASERS.ORG. Pls Email me at jetlasers@gmail.com. Or you can also text me at support@jetlasers.com with iMessage if you use iPhone/iPad/iPod.
Prepare your goggles. safety comes first.
JETLASERS is offline   Reply With Quote
Old 05-23-2013, 05:13 PM #134
Smeerworst's Avatar
Class 3R Laser
 
Join Date: Mar 2011
Posts: 1,633
Rep Power: 329
Smeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond repute
Smeerworst Smeerworst is offline
Class 3R Laser
Smeerworst's Avatar
 
Join Date: Mar 2011
Posts: 1,633
Rep Power: 329
Smeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond repute
Default Re: GB#1st of PL-E Pro Lasers and PL-E 2.0/3.0 Clearance - May 2013

Quote:
Originally Posted by JETLASERS View Post
Glad it finally arrived after the long waiting.
The Laserbee LPM video for the laser is here: PL-E Pro 800mw green laser at 532nm - LPM - YouTube It hits high but drops also fast - sure it might perform a bit better if it is fixed on a tripod.

Will talk soon - have a nice day!
Hi Gray... Thank you so much for this wonderfull build your company made
It's my favorite handheld now!

I saw the video earlier on YT and i was thinking that the lpm video made didn't really say anything couse it was moving around allot

But after checking it here, ''and i will make a LPM video'' it shows way different readings and am more then happy!

Love it!



Sm...

P.s. can you keep me updated on the 10× beam expander ?

Best regards, a happy and returning customer.

Sm.
__________________
Too much to list.
Lazeerer custom polished L6 porcupine build 3.8mm 405nm 1W
Dragonlaser Spartan 405nm 300mW Polished
SKYlasers HL405 405nm 550mW
2×WLasers Sonar Elite Pro 3×Sonar white
2×Dragonlaser Spartan 447nm 1.1W with Beam Expander
TrustFire Cree Z5 2W+ 445nm Custom build
Blord build Big Boy 3W 445nm
Wicked Lasers S3 Arctic 445nm 2W 1.25 etc
Ultrafire C3 host Osram 450nm 180mW single mode
Optotronics RPL-B 473nm peak@112mW viasho upgraded
3XWLasers S3 473nm portable 112mW LE 1×S2
473nm >300 Lab laser
1.4W 520nm - The Hulk - MS-SSW-II Custom Direct Green DTR
SKYlasers PL520 520nm 80mW
Laserglow Hercules-650 532nm 850mW 777mW avg
Optotronics 450 RPL-G 532nm >570mW peak
Wicked Lasers Krypton 1W 532nm avg 997mW pk 1268mW
Jetlasers PL-E Pro >800mW
Laserglow Rigel HV PRO-50 589nm 95.1mW
CNI PGL III C >80mW 589nm
LaserGlow Rigel 6 593.5nm 8mW
Wicked Lasers Spyder II RX (Limited Edition, >300mW) 600mW peak
RHD build SH-032 host 635nm 500mW
RHD build Red Bulldog 638nm 1W+
Dragonlaser Spartan 640nm 100mW
SKYlasers PL650 650nm 1W
RGB and RGY Scanner 1.5W
Flashlights: HID Polarion PH-40, LED Olight SR-90
Smeerworst is offline   Reply With Quote
Old 05-23-2013, 06:13 PM #135
SixTee9's Avatar
Class 2M Laser
 
Join Date: Jan 2013
Location: Newport News, VA
Posts: 506
Rep Power: 93
SixTee9 has a reputation beyond reputeSixTee9 has a reputation beyond reputeSixTee9 has a reputation beyond reputeSixTee9 has a reputation beyond reputeSixTee9 has a reputation beyond reputeSixTee9 has a reputation beyond reputeSixTee9 has a reputation beyond reputeSixTee9 has a reputation beyond reputeSixTee9 has a reputation beyond reputeSixTee9 has a reputation beyond reputeSixTee9 has a reputation beyond repute
SixTee9 SixTee9 is offline
Class 2M Laser
SixTee9's Avatar
 
Join Date: Jan 2013
Location: Newport News, VA
Posts: 506
Rep Power: 93
SixTee9 has a reputation beyond reputeSixTee9 has a reputation beyond reputeSixTee9 has a reputation beyond reputeSixTee9 has a reputation beyond reputeSixTee9 has a reputation beyond reputeSixTee9 has a reputation beyond reputeSixTee9 has a reputation beyond reputeSixTee9 has a reputation beyond reputeSixTee9 has a reputation beyond reputeSixTee9 has a reputation beyond reputeSixTee9 has a reputation beyond repute
Default Re: GB#1st of PL-E Pro Lasers and PL-E 2.0/3.0 Clearance - May 2013

Quote:
Originally Posted by Smeerworst View Post
Hi Gray..

P.s. can you keep me updated on the 10× beam expander ?

Best regards, a happy and returning customer.
Me too
__________________
405nm - 86mw pen
445nm - 3.4w - C11
445nm - 2.6W - Black Ice by ApexProxy
532nm - 68mw pen
638nm - 1.3w @ 1.4a C8
650nm - 121mw pen

(Playstation 4) 'PSN' is SixTee9 - (add me)
SixTee9 is offline   Reply With Quote
Old 05-23-2013, 07:19 PM #136
Smeerworst's Avatar
Class 3R Laser
 
Join Date: Mar 2011
Posts: 1,633
Rep Power: 329
Smeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond repute
Smeerworst Smeerworst is offline
Class 3R Laser
Smeerworst's Avatar
 
Join Date: Mar 2011
Posts: 1,633
Rep Power: 329
Smeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond reputeSmeerworst has a reputation beyond repute
Default Re: GB#1st of PL-E Pro Lasers and PL-E 2.0/3.0 Clearance - May 2013




Some pictures













__________________
Too much to list.
Lazeerer custom polished L6 porcupine build 3.8mm 405nm 1W
Dragonlaser Spartan 405nm 300mW Polished
SKYlasers HL405 405nm 550mW
2×WLasers Sonar Elite Pro 3×Sonar white
2×Dragonlaser Spartan 447nm 1.1W with Beam Expander
TrustFire Cree Z5 2W+ 445nm Custom build
Blord build Big Boy 3W 445nm
Wicked Lasers S3 Arctic 445nm 2W 1.25 etc
Ultrafire C3 host Osram 450nm 180mW single mode
Optotronics RPL-B 473nm peak@112mW viasho upgraded
3XWLasers S3 473nm portable 112mW LE 1×S2
473nm >300 Lab laser
1.4W 520nm - The Hulk - MS-SSW-II Custom Direct Green DTR
SKYlasers PL520 520nm 80mW
Laserglow Hercules-650 532nm 850mW 777mW avg
Optotronics 450 RPL-G 532nm >570mW peak
Wicked Lasers Krypton 1W 532nm avg 997mW pk 1268mW
Jetlasers PL-E Pro >800mW
Laserglow Rigel HV PRO-50 589nm 95.1mW
CNI PGL III C >80mW 589nm
LaserGlow Rigel 6 593.5nm 8mW
Wicked Lasers Spyder II RX (Limited Edition, >300mW) 600mW peak
RHD build SH-032 host 635nm 500mW
RHD build Red Bulldog 638nm 1W+
Dragonlaser Spartan 640nm 100mW
SKYlasers PL650 650nm 1W
RGB and RGY Scanner 1.5W
Flashlights: HID Polarion PH-40, LED Olight SR-90

Last edited by Smeerworst; 05-23-2013 at 08:01 PM.
Smeerworst is offline   Reply With Quote
Old 05-23-2013, 09:25 PM #137
BowtieGuy's Avatar
Class 3B Laser
 
Join Date: Oct 2012
Location: S.E. Michigan U.S.A.
Posts: 3,274
Rep Power: 46410
BowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond repute
BowtieGuy BowtieGuy is online now
Class 3B Laser
BowtieGuy's Avatar
 
Join Date: Oct 2012
Location: S.E. Michigan U.S.A.
Posts: 3,274
Rep Power: 46410
BowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond repute
Default Re: GB#1st of PL-E Pro Lasers and PL-E 2.0/3.0 Clearance - May 2013

Damn Smeerworst, that's more than a Beast, it's a Monster!!!

Great video, impressive output, a solid 1W for 2+ mins.

Those photos alone ought to sell a lot of Jetlasers PLE-Pros.

Great job! +1 for ya.
__________________
405nm Solarstorm S3 (1.09W) • W/L Sonar (264mW)
405nm Custom JETLASERS Ti-B (1.08W)

445nm Build "Ole Blue" (2.8W+)
445nm 1.3W JETLASERS PL-E (1.5W)

450nm Custom JETLASERS Ti-B (327mW)
462nm Solarforce T2 (2.1W)-link-
465nm 1.4mW JETLASERS Mini (1.64mW)
467nm "Maraxus" (2.3W)
470nm "Silver Bullet"
515nm 30mW Ehgemus titanium (84mW)
520nm S/S build (250mW) •50mW JETLASERS Ti-B (73mW)
520nm Ehgemus Custom (1.45W) •Coleman Jr. (234mW)
-link-
532nm 1.5W Goldenstar lab (3W)
532nm 500mW JETLASERS PL-E (754mW)
532nm 100mW JETLASERS Ti-B (161mW)
532nm 5mW "Eclipse" mints tin (54mW)

589nm 80mW CNI PGL-III-C (154mW)
589nm 50mW Dragonlasers Spartan (124mW)

594nm L/G Rigel-6 "LPF Anniv. Ed." (6.7mW)
635nm 20mW JETLASERS Ti (30mW)
638nm Custom JETLASERS Ti-B (232mW)-link-
638nm "Coleman Special" (260mW)
638nm Build in sinner's "MS-SSW Stubby" (1.25W)
650nm W/L E2 (89mW) • Laserbtb PL-650 1000 (1W)
660nm S/S Build (383mW)
674nm 501B/Melles Griot u/k Build 20mW

LK-3D Projector

5W Ophir/dmm LPM, nospin 5W LPM

Last edited by BowtieGuy; 05-23-2013 at 09:29 PM.
BowtieGuy is online now   Reply With Quote
Old 05-23-2013, 11:58 PM #138
hakzaw1's Avatar
Class 4 Laser
 
Join Date: Apr 2009
Location: 'Deep in the Heart Of Texas..."
Posts: 8,336
Rep Power: 24790
hakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond repute
hakzaw1 hakzaw1 is online now
Class 4 Laser
hakzaw1's Avatar
 
Join Date: Apr 2009
Location: 'Deep in the Heart Of Texas..."
Posts: 8,336
Rep Power: 24790
hakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond repute
Default Re: GB#1st of PL-E Pro Lasers and PL-E 2.0/3.0 Clearance - May 2013

GREAT PICs 69

I hope all see the reflection off that item on his wall-

it is NOT afaik a mirror but that reflection is every bit as dangerous. you eye-ware needs to be worn until you are double sure you are out of the danger zones- We have had three incidents so far that all happened the same way ... people are trying to take a pic from the drivers seat- holding a laser AND a camera at the same time- then forget the outside rear view mirror and it takes only a very quick flashback to your eyes to be a real problem-

the opening of the human eye is considered to be 7mm

But when you are in the dark your iris wil open much bigger and the size makes the entering beam many times more dangerous.

just keep in mind that these lasers are the most powerful light source know to man- brighter than the sun. Every bit as bad/worse as watching arc welders.

The first sign that you are getting a dangerous amount in your eyes are afterimages.
Audience scanning is a delight to see as long as there is NO after image.

IIRC more than two dozen people got VERY serious eye damage at a Moscow laser show where they got eye scanned many more were also injured but they did not know it- our eyes have NO pain receptors and our brain will fill in the 'missing' places for us.

so until a doctor looks deep into your eyes you have damage you are not aware of.

In a lawsuit heavy country like the USA a good lawyer will win a case against any show operator who does not do all the pre-show requirements & measurements to assure his show plan is accurate he will lose every time.

ANY power of laser is BAD for the eyes-- Lasik should never be attempted on ones self.


be very careful with both your lasers and what you post here. This forum is read carefully by those that would like to have us in the same situation as those in Au, no hand held lasers over 5mW.

PM is the best way to find more info to know if you may need to see a doctor- PM a mod and they will help you from there.. hak
__________________
IF YOU ARE NEW HERE- READ ALL THIS http://laserpointerforums.com/f37/an...ml#post1353314
& Spend some hours reading at LASERPOINTERSAFETY.COM

powered by PANGOLIN-ILDA Member since 2014.

QS/FB3 +Beyond-APC40-Mamba Black(clone) 5paghettix2 and I-show x2-Kasio synth-midi
KGB- 532 1.1W 445 2.2W 655 1.3W DT Pro 40 still needs more red.
KGB1W+ 532 DT Pro 40 soon to be GB.
Laserking 1300RGB FULL COLOR 30K(may be FS)
Laserking RGB LK PD2 500 and LK SD 850
REKE RGB 500- G 300
HeNes-(12)R(3)G-COH-594/5 mW-thnx DrSam
MULTILINE-147mW[
445nm 180mW-Mini spiro-Yob.
LPMs-RadiantAlpha& Pro5W-AixiZ SPER/KenmeterLite/LB1
Spacelas 1178mW 655nm/AixiZ 300mW532&
2 B&W 473nm 5/6mW lab
JETLRS1.3W&1.2W-MGL-H
638 180mW ttl mimi lab (av. 230mW)
405 100mW ttl mini lab
445 300 mW ttl mni lab ^AixiZ^ all for a lumia PJ
*MightyMite 2000* RGB all diode 2.2W 30K- 637/520./450...NEW!!
Guide DIY Pjs by Dan-
http://nqlasers.com/scannerreference/index.php?title=Main_Page

Last edited by hakzaw1; 05-24-2013 at 12:03 AM.
hakzaw1 is online now   Reply With Quote
Old 05-24-2013, 12:53 AM #139
Livinloud's Avatar
Class 4 Laser
 
Join Date: Feb 2013
Location: Masshole
Posts: 5,048
Rep Power: 452
Livinloud has a reputation beyond reputeLivinloud has a reputation beyond reputeLivinloud has a reputation beyond reputeLivinloud has a reputation beyond reputeLivinloud has a reputation beyond reputeLivinloud has a reputation beyond reputeLivinloud has a reputation beyond reputeLivinloud has a reputation beyond reputeLivinloud has a reputation beyond reputeLivinloud has a reputation beyond reputeLivinloud has a reputation beyond repute
Livinloud Livinloud is offline
Class 4 Laser
Livinloud's Avatar
 
Join Date: Feb 2013
Location: Masshole
Posts: 5,048
Rep Power: 452
Livinloud has a reputation beyond reputeLivinloud has a reputation beyond reputeLivinloud has a reputation beyond reputeLivinloud has a reputation beyond reputeLivinloud has a reputation beyond reputeLivinloud has a reputation beyond reputeLivinloud has a reputation beyond reputeLivinloud has a reputation beyond reputeLivinloud has a reputation beyond reputeLivinloud has a reputation beyond reputeLivinloud has a reputation beyond repute
Default Re: GB#1st of PL-E Pro Lasers and PL-E 2.0/3.0 Clearance - May 2013

want to see the PL-E Pro in someones hand to get an idea of size

great pictures SM
__________________
Please Read: Sticky- Complete Guide To Owning Lasers
Sticky- FYI: New Search Function

Laser collection:
Blue & Black Marble Kryton Groove 445nm- 2.65W with 3 element lens, G2 untested
Polished Minisabre V2 462nm - 250mW
Red & Black Marble Kryton Groove 635nm- 500mW
Custom Titanium PL520- stable 80mW



M43vn, Crelant 7G2CS dedomed, Armytek Barracuda, SupBeam K40vn, SupBeam X40, Niwalker Vostro Mvn, Convoy C8 2015 version, Shadow SL3, Crelant 7G5CS, L3 L10, 2x 365nm UV Flashlights, Red P60 Dropin
Livinloud is offline   Reply With Quote
Old 05-24-2013, 11:44 AM #140
JETLASERS's Avatar
Class 2 Laser
 
Join Date: Aug 2010
Location: Northern China
Posts: 354
Rep Power: 897
JETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond repute
Send a message via Skype™ to JETLASERS
JETLASERS JETLASERS is offline
Class 2 Laser
JETLASERS's Avatar
 
Join Date: Aug 2010
Location: Northern China
Posts: 354
Rep Power: 897
JETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond repute
Send a message via Skype™ to JETLASERS
Default Re: GB#1st of PL-E Pro Lasers and PL-E 2.0/3.0 Clearance - May 2013

Quote:
Originally Posted by Smeerworst View Post
Hi Gray... Thank you so much for this wonderfull build your company made
It's my favorite handheld now!

I saw the video earlier on YT and i was thinking that the lpm video made didn't really say anything couse it was moving around allot

But after checking it here, ''and i will make a LPM video'' it shows way different readings and am more then happy!
Love it!

Sm.
Yes, the video on Youtube doesnot say anything coz it is too shaky!!
Very nice pics - just saved them to my hard drive. i see you are using the default grip instead of the diamond knurling one.
Quote:
Originally Posted by Smeerworst View Post
P.s. can you keep me updated on the 10× beam expander ?
Sm.
Quote:
Originally Posted by SixTee9 View Post
Me too
The new 10X beam expanders are being machined now - they will be available soon. Thanks!
__________________
Gray from JETLASERS.COM and Laser Shop at JETLASERS.ORG. Pls Email me at jetlasers@gmail.com. Or you can also text me at support@jetlasers.com with iMessage if you use iPhone/iPad/iPod.
Prepare your goggles. safety comes first.

Last edited by JETLASERS; 05-24-2013 at 12:08 PM. Reason: adding info
JETLASERS is offline   Reply With Quote
Old 05-24-2013, 11:52 AM #141
JETLASERS's Avatar
Class 2 Laser
 
Join Date: Aug 2010
Location: Northern China
Posts: 354
Rep Power: 897
JETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond repute
Send a message via Skype™ to JETLASERS
JETLASERS JETLASERS is offline
Class 2 Laser
JETLASERS's Avatar
 
Join Date: Aug 2010
Location: Northern China
Posts: 354
Rep Power: 897
JETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond reputeJETLASERS has a reputation beyond repute
Send a message via Skype™ to JETLASERS
Default Re: GB#1st of PL-E Pro Lasers and PL-E 2.0/3.0 Clearance - May 2013

Quote:
Originally Posted by lonepine View Post
Gray! you clever dog! Your smiley leads me to believe that you dont' think i have safety glasses..you're only half correct. I have decent goggles for my 445nm ( i gave them to my brother until his arrive from sleaze-bay), i don't have nice goggles for the 532 Pro i am about to get my eager hands on. I only know what i read in this forum, and although the goggles i already have should protect any wavelength from 100-490nm..i don't think they have great IR filtering, I may be wrong, but doesn't a 500mw dpss 532nm have a decent amount of "invisible damage byproduct" to consider? I am perfectly prepared to be called a "noob" if this is wrong...just trying to keep my peepers in playing shape!

Anyway, i hope everything is fulfilling and happy for you over there in your homeland Gray! I'll talk to you soon!

p.s. does JL have any tripods (clamps) back in stock that would be good for the PRO's? if so, i will buy one

Carsen
Yes Carsen i get your point - what i mean by the safety glasses is 190-540nm range which protects from both 445nm and 532nm. Actually the 532nm laser is ir filtered thus has little ir residual - it is much safer esp. when wearing the goggles.

Regarding the tripod, actually any standard tripod will work, so there are lots of tripod on ebay with better prices and lower shipping cost.
__________________
Gray from JETLASERS.COM and Laser Shop at JETLASERS.ORG. Pls Email me at jetlasers@gmail.com. Or you can also text me at support@jetlasers.com with iMessage if you use iPhone/iPad/iPod.
Prepare your goggles. safety comes first.
JETLASERS is offline   Reply With Quote
Old 05-25-2013, 02:50 AM #142
Junior Member
 
Join Date: Oct 2012
Location: Bend, Oregon
Posts: 12
Rep Power: 0
lonepine has much to be proud oflonepine has much to be proud oflonepine has much to be proud oflonepine has much to be proud oflonepine has much to be proud oflonepine has much to be proud oflonepine has much to be proud oflonepine has much to be proud oflonepine has much to be proud of
lonepine lonepine is offline
Junior Member
 
Join Date: Oct 2012
Location: Bend, Oregon
Posts: 12
Rep Power: 0
lonepine has much to be proud oflonepine has much to be proud oflonepine has much to be proud oflonepine has much to be proud oflonepine has much to be proud oflonepine has much to be proud oflonepine has much to be proud oflonepine has much to be proud oflonepine has much to be proud of
Default Re: GB#1st of PL-E Pro Lasers and PL-E 2.0/3.0 Clearance - May 2013

Thanks Gray. I take no risks with my eyes...ever. I know from all the hours in lab from college that the eye is not something to take risks with! You're a thoughtful person for being so considerate about it, and i hope everyone noticed Hakazw's comments about the subject. This hobby is only fun because it is a privelege most of us barely deserve. To harness something previously only accessible to the elite scientist of the world, to handle a technology that until 100 years ago was only speculated in equations governing the mechanics of energy and the universe, and to be able to do so with free will and unsupervised freedom is what's exciting about this hobby. ...it is a glimpse into the raw power of small things in concentration, a sample of how awesome and mysterious the sub-atomic world is, and it really is an honor that should not be taken for granted. This hobby is not fun because you can point at things, or burn things, or scare things...it is fun because it is a rare chance in life for the average man to wield control over extraordinary forces. Sure, all those things i mentioned are exciting, but they are not the root reward of owning and operating a laser. I may be new to the formal organization of "lasering", but i have marveled at the beauty and awesome power of lasers since i was a small child...and i never would have believed that i would have the opportunity to own something as powerful as we all now have access to...and i don't turn my laser on to see what it can do, i turn it on to remind myself how lucky i am. That's a little tangent i guess, so take it for what it's worth. Anyway gray, thanks for the Safety glasses for 532nm. I can't wait!
lonepine is offline   Reply With Quote
Old 05-25-2013, 03:36 AM #143
hakzaw1's Avatar
Class 4 Laser
 
Join Date: Apr 2009
Location: 'Deep in the Heart Of Texas..."
Posts: 8,336
Rep Power: 24790
hakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond repute
hakzaw1 hakzaw1 is online now
Class 4 Laser
hakzaw1's Avatar
 
Join Date: Apr 2009
Location: 'Deep in the Heart Of Texas..."
Posts: 8,336
Rep Power: 24790
hakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond repute
Default Re: GB#1st of PL-E Pro Lasers and PL-E 2.0/3.0 Clearance - May 2013

Carsen----ITSSSSSSS HEREEEEEEE

wow sweet laser!!

a quick check on my (high reading) kenometer lite shows its overspec- these are the same size as the other Pl-Es but some very nice improvements-- there is a threaded cap that screws in over the IR filter out front- the rubber 'On" button is gone and there is a nice metal one-

I have 12 nitecore i2s here in stock and a few are already sold-
get batteries with these as i 'think' it legal to ship USPS IF a charger can be called the 'intended device' and the charger will fit into a small flatrate box for 6.15$ shipping with tracking.

what a nice charger I will never use a cheap one again..another members suggested i just remove all the parts from the box and simply flatten it- duh!!
what I did not think of that is a mystery- so all will be sent with the original boxes.


I have been telling all that the new BEs are NOT ready yet.
A better Q is how will they be attached??- the holes it the crown of Carsen's Pro are not threaded- could the new BE screw in where the front lens cap??
That would be great!

If anyone is interested I will have 4 spare 3W 9mm diodes w/ stock lens to sell on Monday at 85$ each= can add to any box shipping out on Tuesday (monday is a holiday)I will be performing my first 9mm diode-ectomy on a new PJ that arrived today-- prolly on sunday.. I love to see whats 'under the hood' i am reducing the price of the last A-130 diodes to 20$ each.


@lonepine- can you add an occasional indent/paragraph in your posts?? please?
they make me cross-eyed. lol

I used to write posts like that and until i knew better I always typed everything in upper case...

FYI I am surprized there has not been a big fuss over the new JL 473nm Pro PL-E??

could the quality of Laserglows be THAT much better??
quote..
Wavelength: 473 nm (blue)Starting at: $399 Includes free shipping! See pricing and ordering tab.
Output Power: 2 mW - 99 mW (Varies with model)

Aquarius-10 Sustained:10-19mW
Peak: ~25mW O.E.M. Class IIIb $549

almost 2X what JL wants.....

LG sure is proud of those..

about JL and IR filters ???? you are kidding right??
thats a given- any quality laser maker would not even give that a second thought -- just like rev. polarity protection all JL lasers come that way-- ALWAYS

come back to this thread in an hour or so- I will torture Carsen with some pics of his new laser--

I will post my power graph sat night..

forgot to mention this..
the Pro Pl-Es can be broken down more than the earlier models- this means a smaller case for these can be used-as the front battery tube is not glued in place.. also there is a standard 1/4 inch tripod hole on these- so any tripod will make a great laser stand-but I would shy away from the flimsy and cheap- this is a fairly heavy laser and it is NOT shock proof- you drop it and sorry but the warranty cannot be expected to cover that.

AND
lasers have been known to roll off of things if set on their sides.
in the below pics area standard fat=size pen-pointer a JL Tib 532 150 9still have a few in stock here in Tx. and on the right is our fav the JL Pl-C.
Every time i do shots like this I am reminded of 'Handy Andy' meeting with Travis in a hotel room to sell handguns in 'taxi driver' the Ti-B would be thk ppk 9mm - the pointer a derringer and the Pro ,of course, would be the 44 mag.


d>(*U*)<b
^^^^^^^^happy hak-- with his noise cancelling headphones on .... rotfl
Attached Thumbnails
GB#1st of PL-E Pro Lasers and PL-E 2.0/3.0 Clearance - May 2013-carsens-pro-jl-pl-e-500-532-et-al-002.jpg   GB#1st of PL-E Pro Lasers and PL-E 2.0/3.0 Clearance - May 2013-carsens-pro-jl-pl-e-500-532-et-al-004.jpg   GB#1st of PL-E Pro Lasers and PL-E 2.0/3.0 Clearance - May 2013-carsens-pro-jl-pl-e-500-532-et-al-005.jpg  
__________________
IF YOU ARE NEW HERE- READ ALL THIS http://laserpointerforums.com/f37/an...ml#post1353314
& Spend some hours reading at LASERPOINTERSAFETY.COM

powered by PANGOLIN-ILDA Member since 2014.

QS/FB3 +Beyond-APC40-Mamba Black(clone) 5paghettix2 and I-show x2-Kasio synth-midi
KGB- 532 1.1W 445 2.2W 655 1.3W DT Pro 40 still needs more red.
KGB1W+ 532 DT Pro 40 soon to be GB.
Laserking 1300RGB FULL COLOR 30K(may be FS)
Laserking RGB LK PD2 500 and LK SD 850
REKE RGB 500- G 300
HeNes-(12)R(3)G-COH-594/5 mW-thnx DrSam
MULTILINE-147mW[
445nm 180mW-Mini spiro-Yob.
LPMs-RadiantAlpha& Pro5W-AixiZ SPER/KenmeterLite/LB1
Spacelas 1178mW 655nm/AixiZ 300mW532&
2 B&W 473nm 5/6mW lab
JETLRS1.3W&1.2W-MGL-H
638 180mW ttl mimi lab (av. 230mW)
405 100mW ttl mini lab
445 300 mW ttl mni lab ^AixiZ^ all for a lumia PJ
*MightyMite 2000* RGB all diode 2.2W 30K- 637/520./450...NEW!!
Guide DIY Pjs by Dan-
http://nqlasers.com/scannerreference/index.php?title=Main_Page

Last edited by hakzaw1; 05-25-2013 at 04:13 AM.
hakzaw1 is online now   Reply With Quote
Old 05-25-2013, 08:52 PM #144
hakzaw1's Avatar
Class 4 Laser
 
Join Date: Apr 2009
Location: 'Deep in the Heart Of Texas..."
Posts: 8,336
Rep Power: 24790
hakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond repute
hakzaw1 hakzaw1 is online now
Class 4 Laser
hakzaw1's Avatar
 
Join Date: Apr 2009
Location: 'Deep in the Heart Of Texas..."
Posts: 8,336
Rep Power: 24790
hakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond reputehakzaw1 has a reputation beyond repute
Default Re: GB#1st of PL-E Pro Lasers and PL-E 2.0/3.0 Clearance - May 2013

SERIOUS HEADS-UP
The new pro=lines all have a threaded 'plug' that screws into the front.
A possible problem wit it-
If you have accidently clicked the ON button and dont know that if you press the tailcap button the laser will fire and if that lens cover has not been removed that would not be good if it was on very long- ALSO being quite small this part may get lost easily. It DOES have a hole in it(not through it) and I guess you could teather it to the crown holes or to the tail cap holes or just add a small lanyard to the lens cover. I ma just leave mine in my laser case to keep track of it..
These Pros now have a greatly improved ac/dc wallwart- the plug is now perfect= stays in place with N/Ps. AND a clamp style laser(mic) stand is no longer needed because there is now a 1/4th inch threaded hole for using any camera tripod.

The new all metal on/off button is also a great upgrade.
and there is now another 'jack' in the tailcap for the addition on a mouse tail switch.
if you want one be sure to add it to your order- I have no extras here with me= but plenty Li-Ions and 10 in stock NiteCore i2 intelligent safe chagers= VERY nice and so much safer-Gray hooked us up with a nw supply od high quality glass film-bonded Diffracton Gratings so all will get one in future shippings from me.
__________________
IF YOU ARE NEW HERE- READ ALL THIS http://laserpointerforums.com/f37/an...ml#post1353314
& Spend some hours reading at LASERPOINTERSAFETY.COM

powered by PANGOLIN-ILDA Member since 2014.

QS/FB3 +Beyond-APC40-Mamba Black(clone) 5paghettix2 and I-show x2-Kasio synth-midi
KGB- 532 1.1W 445 2.2W 655 1.3W DT Pro 40 still needs more red.
KGB1W+ 532 DT Pro 40 soon to be GB.
Laserking 1300RGB FULL COLOR 30K(may be FS)
Laserking RGB LK PD2 500 and LK SD 850
REKE RGB 500- G 300
HeNes-(12)R(3)G-COH-594/5 mW-thnx DrSam
MULTILINE-147mW[
445nm 180mW-Mini spiro-Yob.
LPMs-RadiantAlpha& Pro5W-AixiZ SPER/KenmeterLite/LB1
Spacelas 1178mW 655nm/AixiZ 300mW532&
2 B&W 473nm 5/6mW lab
JETLRS1.3W&1.2W-MGL-H
638 180mW ttl mimi lab (av. 230mW)
405 100mW ttl mini lab
445 300 mW ttl mni lab ^AixiZ^ all for a lumia PJ
*MightyMite 2000* RGB all diode 2.2W 30K- 637/520./450...NEW!!
Guide DIY Pjs by Dan-
http://nqlasers.com/scannerreference/index.php?title=Main_Page
hakzaw1 is online now   Reply With Quote
Reply

Tags
pl-e laser clearance, pl-e pro group buy





Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


LinkBacks (?)
LinkBack to this Thread: http://laserpointerforums.com/f55/gb-1st-pl-e-pro-lasers-pl-e-2-0-3-0-clearance-may-2013-a-82017.html
Posted By For Type Date
Jet Lasers Photonics Devices Co., Ltd This thread Refback 06-07-2013 12:38 PM
Jet Lasers Photonics Devices Co., Ltd This thread Refback 05-04-2013 04:16 AM










Loading








Green Laser Pointers by Category Blue Laser Pointers by Category Red Laser Pointers by Category
Yellow Laser Pointers by Category Violet Laser Pointers by Category Orange Laser Pointers by Category
Top Laser Pointers by Power - 1 Watt+ Top Laser Pointers by Power - 500mW+ Top Laser Pointers by Power - 250mW+
Laser Pointer Database High Power Laser Pointers Laser Pointer Diodes






Privacy Policy | Advertising Disclaimer | Terms of Use


 


All times are GMT. The time now is 01:04 PM.


Powered by: vBulletin
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO
Privacy Policy | Advertising Disclaimer | Terms of Use
Copyright (C) 2017 Laser Pointer Forums, LLC