Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

CNI GB #10 (June, is Planned for delivery)

mikeeey

mikeeey

0
Joined
Jun 7, 2007
Messages
1,771
Points
0
twhite828 said:
That is the key switch. The one in the diagram has a momentary switch.

Based on Glenn's post, he may not be able to get the clicky-only M anymore.

-Trevor
Click to expand...
aw... I sure hope that's not the case

kevinmassey said:
That's the FDA compliant version with all the safety features. Make sure when you order to tell Glenn to order it without the safety features. http://www.dragonlasers.com/catalog/photos/800/sbp1.jpg There's a link showing it with out the safety features. It has a rear tail clicky.
Click to expand...

Well that works for me!
You don't think they would include a clicky switch in the back AND the momentary push switch on the side do you?

btw, that picture looks amazing!
 





Trevor

Trevor

0
Joined
Jul 17, 2009
Messages
4,386
Points
113
mikeeey said:
aw... I sure hope that's not the case
Click to expand...

Well, this is what he said:

scopeguy20 said:
Everyone please note:

Any laser that is not FDA approved for use in the USA such as GLP 532 nm >5 mW is not going to be offered unless you pay to ship to your country, (non-USA address) separately from my GB and or are buying a "laser Module" which you still must be responsible for incorporating into your own device which still is required to conform to FDA/CDRH rulings. I will not take an illegal order!

All the PGL III portable lasers are fully compliant with ascension numbers and safety devices, as are the GLP 593.5nm and such that are <5 mW.
Click to expand...

Sounds like Glenn doesn't want illegal lasers shipped to him anymore. Maybe if you get CNI to ship directly to your address? It seems based on that quote that you can still get one if you pay for shipping to a non-US address.

-Trevor
 
kevinmassey

kevinmassey

0
Joined
Nov 4, 2009
Messages
1,202
Points
0
Yeah, I really love that host. That pic is from dragon lasers. I just saw that part about the pen lasers. That sucks! I guess you can't get it without safety features anymore :/
 
Last edited:
mikeeey

mikeeey

0
Joined
Jun 7, 2007
Messages
1,771
Points
0
I wonder how much it would cost for CNI to ship it directly to me compared to the price with Glenn's GB.
I wonder if I can have it as part of his GB but they send just my laser to my address if I pay however much extra for the shipping. It's not a top priority right now anyway.. I don't have the money.
 
DJNY

DJNY

0
Joined
Nov 2, 2009
Messages
5,991
Points
83
mikeeey said:
I wonder how much it would cost for CNI to ship it directly to me compared to the price with Glenn's GB.
I wonder if I can have it as part of his GB but they send just my laser to my address if I pay however much extra for the shipping. It's not a top priority right now anyway.. I don't have the money.
Click to expand...

It was $40 to Austria, sent with DHL.


Edit: 671 post --> time for a 671nm DPSS :D
 
Last edited:
mikeeey

mikeeey

0
Joined
Jun 7, 2007
Messages
1,771
Points
0
DJNY said:
It was $40 to Austria, sent with DHL.
Click to expand...
29mvr4j.jpg

waaaay to much for shipping in my opinion lol...
 
mikeeey

mikeeey

0
Joined
Jun 7, 2007
Messages
1,771
Points
0
Now I have to decide if I want the shutter or not. I wonder if the shutter is just a piece that screws on the end. I'm considering that dragonlaser beam expander (but isn't compatible with the shutter), but until then I don't want the outside of the lens to get scratched or dirty. I should find out if there's a screw on accessory for this purpose, or if the shutter actually does screw on.
 
realista

realista

0
Joined
Dec 27, 2008
Messages
927
Points
18
hello... where is the model of green pen .... like the novalasers endeavor????
 
scopeguy20

scopeguy20

0
Joined
Jun 28, 2007
Messages
3,443
Points
63
I asked about the shipping and it costs a lot to a ship separate, so sorry. A possible work around would be if someone in Europe wants to do GB and CNI sends the lasers to them, from there, they can send to other non-USA customers. CNI doesn't want to send any non-FDA/CDRH compliant lasers to USA as there c/b trouble for the importer and CNI. Also, CNI doesn't want to offer the "Endeavor' I think there is a non-circumvent agreement w/ Nova.
Mikeeey, if I were you, I would consider a Mellis Griot Beam Expander and a PGL III, and the adapter c/b made by Flaminpyro, that's my thinking... -Glenn
 
Last edited:
mikeeey

mikeeey

0
Joined
Jun 7, 2007
Messages
1,771
Points
0
Does a Mellis Griot Beam Expander screw on to the end of the PGL? or does ot tighten on?

How does it compare to a DL beam expander, being that theirs is actually made for the PGL-III?

So how would i get a clicky-only PGL-III? it sounds like my only option is if i have my laser mailed to someone out of the country (Canada for example) and have that person mail it to me?
 
RA_pierce

RA_pierce

0
Joined
Sep 16, 2007
Messages
3,658
Points
113
mikeeey said:
Does a Mellis Griot Beam Expander screw on to the end of the PGL? or does ot tighten on?

How does it compare to a DL beam expander, being that theirs is actually made for the PGL-III?

So how would i get a clicky-only PGL-III? it sounds like my only option is if i have my laser mailed to someone out of the country (Canada for example) and have that person mail it to me?
Click to expand...

The Melles Griot beam expander is not designed for the PGLs.
Glenn suggested that you have a custom adapter machined for it by a member here. The DL beam expander will not fit on the PGL-M with the safety features, so a custom machined adapter will be necessary if you order that product.

Glenn stated in his post that you can order un-certified laser products if you have it shipped directly to you from CNI. The shipping cost will be expensive if you do it this way.

If it is too much of a hassle, it is time to consider another option.
 
scopeguy20

scopeguy20

0
Joined
Jun 28, 2007
Messages
3,443
Points
63
True, also, I believe Flaminpyro can make an adapter for most any laser and beam expander as long as the two are measured carefully or sent to him. AMB! -Glenn
 
mikeeey

mikeeey

0
Joined
Jun 7, 2007
Messages
1,771
Points
0
RA_pierce said:
The Melles Griot beam expander is not designed for the PGLs.
Glenn suggested that you have a custom adapter machined for it by a member here. The DL beam expander will not fit on the PGL-M with the safety features, so a custom machined adapter will be necessary if you order that product.

Glenn stated in his post that you can order un-certified laser products if you have it shipped directly to you from CNI. The shipping cost will be expensive if you do it this way.

If it is too much of a hassle, it is time to consider another option.
Click to expand...
ah gotcha.

about how expensive would it be? DJNY mentioned that it was $40 to Australia, so I wonder how much it is to the US.
I also wonder what the odds are of the customs taking my laser, I mean dealextreme and those companies would tend to disguise it and call it a "gift" or "flashlight". I'm assuming CNI doesn't do this, and it says laser right on it?
Well actually.. that's a question.. lol, what do CNI packages look like?
 
scopeguy20

scopeguy20

0
Joined
Jun 28, 2007
Messages
3,443
Points
63
It will be labeled as laser(s), and it will likely be about $80 shipping. -Glenn
 
You must log in or register to reply here.




Top