Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

"CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (REFUNDING.!!!!!!)

AnthoT

0
Joined
Jan 14, 2012
Messages
2,133
Points
48
Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

Yes these things happen.. for alot (ALOT) of reasons.. I spent alot of cash to learn... actually Ebay is going to make me verify this month because I reached my $6000 limit.. lol I told them they can verify my visa I am not linking my bank acct... not sure what will become of it... but they cant force me into that... I'll tell em what they can do with their hat!

6000$ in one month on lasers! :eek:

Woah.
 





AnthoT

0
Joined
Jan 14, 2012
Messages
2,133
Points
48
Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

nooo
since I started paypal... they want me to verify now because I am about 100$from spending $6000 on pp.. I never heard of that b4...

Ooohhh, :p
 
Joined
Feb 7, 2012
Messages
977
Points
0
Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

I hope it is an ancient as it looks and I hope the switch can be removed like they say.. They say it's 1927 ish I need to do a double tripple build in this... 3W 638? sinle mode.

Sounds like fun.

I actually could use the removal tools b4 the press.. if anyone has some good tool prices! or I just leave tthe dead where they lay.. nothing lands in a steel aixis anymore...
 
Last edited:

DTR

0
Joined
Jun 24, 2010
Messages
5,684
Points
113
Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

I'm not sure who build it... Jeff.. Well it looks like his work anyway's... Thanks again DTR. I also have alot more 3.8 modules than I could possibly use if anyone is in a pinch and cant find them just ask. There the new ones with the deep diode pocket that is nicely machined.

Yep the 3.8mm presses are from Jeff he also has the original 5.6mm presses and now 9mm presses as well. See this thread.
http://laserpointerforums.com/f64/diode-press-sale-15-00-a-42590-6.html#post1095205
p1019412.jpg




I will be using the press on a PL450B b4 one of these I assume... I didnt get a sleve with my 5.6 press. also the copper 3.8mm modules from DTR are threaded backs and have a nicely machined aluminum back like an aixis module...

You can use the sleeve you have for both presses. Yes the aluminum back half's are awesome. The best part is you keep the ability to use a diode press with the rear threaded copper modules and for those that wanted the ones without rear threads for the extra surface area transfer you can keep the back half on since it is pure aluminum not brass like the Aixiz it will have decent heat transfer through the threads and you can cut the it down to what ever size you need to fit your host.:)
 
Last edited:

Fiddy

0
Joined
May 22, 2011
Messages
2,726
Points
63
Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

mate what did i tell you about double posting?
 
Joined
Feb 7, 2012
Messages
977
Points
0
Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

Geese did I do that.. I really didnt mean to.. Sorry guy\gals.. I am not used to forums at all. The edit post screwes me up.. Soz
 

ped

0
Joined
Nov 25, 2008
Messages
4,889
Points
113
Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

lazeerer , everyone trusts you, as I do, that's not the problem.

GB's can go either way , and yeah there are some waiting times invlolved.

If you trust these suppliers then that's cool with me I'll wait :beer:
 
Joined
Feb 7, 2009
Messages
201
Points
0
Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

I'm still in, to the bitter end:beer:

lazeerer, you've been busting your hump trying to make this thing come together for everyone, and no matter the outcome, I for one am grateful. Snag a cold one and relax. If things work out and we get some killer diodes, that'd be fantastic. If things go south, it's not the end of the world. Matter of fact, if it comes down to issuing refunds, you can take my $20 and donate it to LPF.
 
Joined
Sep 11, 2011
Messages
249
Points
18
Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

I'll wait for a bit longer. I've been waiting for these diodes for months, might as well wait a bit more. Thanks for doing the gb.
 
Joined
Feb 7, 2012
Messages
977
Points
0
Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

PED that tesla coil has got to be the strangest thing I have ever seen... it looks like you even braught out the 45 record player for that.. Nice Job.. Sorry Fiddz again... I try to help but sometimes my fingers do the walking.. I may have use for a breathalizer on my keyboard... Cuz when the fingers have had enough they all have brains of there own...
 

AUS

0
Joined
Apr 12, 2012
Messages
565
Points
28
Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

Through all of this I think people need to remember that GB's may not always go as expected. For some of us its worth the risk for the chance of getting something exotic / unusual / cheap that wouldn't be possible otherwise. If it's not worth the risk of something going bad, you probably shouldn't be in it.

lazeerer has done his best here and is still doing it. If a supplier screws up it's not his fault.

I'll wait, its worth the risk.

That's my 2c worth anyway.
 
Joined
Jan 7, 2007
Messages
6,309
Points
83
Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

This delay gives me time to build other stuff!!!
I can wait -- no problem.☺
HMike
 
Joined
May 25, 2010
Messages
3,655
Points
0
Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

Hey Guys,

Thanks for all the Comments.:)

Ok So here is the Latest Update.

This does not apply to those that want to wait with my 30pcs order which i will keep in past the deadline.:)


I sent them a message with a Dead line of Next Friday Aug, 10.....

For these member that do not want to wait with us that is the cut off time where they will need a total number from me of diodes that i want to be refunded for.

So Thursday Aug,9 i will ask and get the total from anyone that wants a refund.

Once i give them the total number on Aug,10 iam Assuming that it will take a few days for them to issue the refund to me. Then i will issue those refunds to you guys.:)

Again thank you for all your patients. Its been a tough GB but iam still full force trying.

What kills me more is today i received a laser back that i built for someone using one of the original diodes that did the 450mW-500mW of power. Seeing it has gave me even more drive. I told them iam willing to pay more to get them out of my own pocket for everyone. At this point i dont care i just want them.!
 

ARG

0
Joined
Feb 27, 2011
Messages
6,772
Points
113
Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

Thanks for all your hard work and determination with this GB lazeerer! It's really appreciated.
 
Joined
Dec 27, 2011
Messages
2,062
Points
48
Re: "CLOSED.!!!" GB: For The New 3.8mm Red Diodes 660nm (Taking Payments for Round 2)

Hey Guys,

Thanks for all the Comments.:)

Ok So here is the Latest Update.

This does not apply to those that want to wait with my 30pcs order which i will keep in past the deadline.:)


I sent them a message with a Dead line of Next Friday Aug, 10.....

For these member that do not want to wait with us that is the cut off time where they will need a total number from me of diodes that i want to be refunded for.

So Thursday Aug,9 i will ask and get the total from anyone that wants a refund.

Once i give them the total number on Aug,10 iam Assuming that it will take a few days for them to issue the refund to me. Then i will issue those refunds to you guys.:)

Again thank you for all your patients. Its been a tough GB but iam still full force trying.

What kills me more is today i received a laser back that i built for someone using one of the original diodes that did the 450mW-500mW of power. Seeing it has gave me even more drive. I told them iam willing to pay more to get them out of my own pocket for everyone. At this point i dont care i just want them.!

I would not want you to pay more out of pocket, but I would be willing to pay more for them as well. Let me know if you do end up getting them at a higher cost. I will gladly pay my share so you don't have out-of-pocket expenses.

:beer:
 




Top