Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

CLOSED Copper modules - 5.6 & 9mm - $2

Mohrenberg

Mohrenberg

0
Joined
Aug 30, 2008
Messages
6,891
Points
83
Re: GB: Copper modules - 5.6 & 9mm - $2

Postage will be actual cost.

for 5 or 10 you're probably looking at around $3-4
 





Mohrenberg

Mohrenberg

0
Joined
Aug 30, 2008
Messages
6,891
Points
83
Re: GB: Copper modules - 5.6 & 9mm - $2

Bob_Boyce said:
Hey there Matt

I'll take 10 X 5.6mm and 10 X 9mm. I can thread the backs myself. I actually use the back threads in my builds to attach the modules to my copper heatsinks. Let me know when and how much to send for payment. You already have my address from the order I placed the other day.

Chinese new year, thank goodness my latest package left china on 1/31.

Bob
Click to expand...

I'm actually debating having some threaded.
I found a use for it. I'm going to make small 10440 hosts that you just mount the driver directly on the diode and screw the module into the barrel.
 
Bob_Boyce

Bob_Boyce

0
Joined
Apr 11, 2009
Messages
187
Points
43
Re: GB: Copper modules - 5.6 & 9mm - $2

Mohrenberg said:
I'm actually debating having some threaded.
I found a use for it. I'm going to make small 10440 hosts that you just mount the driver directly on the diode and screw the module into the barrel.
Click to expand...
That's how I do my AAA builds. I make the threads on the heatsink slightly undersize so the module screws in very tightly, then solder on the inside prior to pressing the diode in. The driver mounts on the diode and either has a spring for - or a brass contact for + depending on driver and case polarity.

Please let me know about the threaded option, I would prefer that for sure to save me machining time. I'm not a big fan of the module in hole with set screw(s) method that seems to be popular. Thermal efficiency suffers most of the time with that.

Bob

PS: Forgot to mention, I pot the driver to the module at the diode end with Loctite Stik'n Seal to take the stress applied by the battery off of the diode leads.
 
Last edited:
sinner

sinner

0
Joined
Oct 27, 2011
Messages
2,565
Points
83
Re: GB: Copper modules - 5.6 & 9mm - $2

Please put me down for 40 modules.

10 x 9mm
30x 5.6mm
 
pschlosser

pschlosser

0
Joined
Dec 31, 2012
Messages
904
Points
0
Re: GB: Copper modules - 5.6 & 9mm - $2

I think I want some of these, likely five (5) of each.

But I need some hand-holding, first. I need help better understanding how I am to use these.

Using this image from DTR's website:

P1019493.JPG


I get these are replacing the copper part shown in the image. And I see when omitting the silver housing on the right, you don't need any back threads on the copper heat sink. But, when reviewing BLord's image in post #5, I don't see in inner threads, either. Is this how the news ones are shipped? If so, to what is the lens threaded? Don't we need the inner threads to attach a lens housing?
 
ARG

ARG

0
Joined
Feb 27, 2011
Messages
6,772
Points
113
Re: GB: Copper modules - 5.6 & 9mm - $2

Yes, you're replacing the copper part and you don't get any of the other parts, back, spring, lens, lens nut.

They do have inner threads, it's just hard to see in Blords picture.
 
pschlosser

pschlosser

0
Joined
Dec 31, 2012
Messages
904
Points
0
Re: GB: Copper modules - 5.6 & 9mm - $2

ARGLaser said:
Yes, you're replacing the copper part and you don't get any of the other parts, back, spring, lens, lens nut.

They do have inner threads, it's just hard to see in Blords picture.
Click to expand...

Thanks ARG, for the clarification.

I am in for five (5) each:
5 x 5.6mm
5 x 9.0mm
 
Blord

Blord

0
Joined
Dec 24, 2007
Messages
5,356
Points
0
Re: GB: Copper modules - 5.6 & 9mm - $2

Of course these modules have inner thread. All modules do. :D
The modules in this GB don't have an outer thread for the back housing.
It is the most right module.
copper%20modules-1.jpg
 
bloompyle

bloompyle

2
Joined
Apr 26, 2010
Messages
4,175
Points
83
Re: GB: Copper modules - 5.6 & 9mm - $2

I'm upping my order to 15.

10x.......5.6
5x.........9
 
Last edited:
pschlosser

pschlosser

0
Joined
Dec 31, 2012
Messages
904
Points
0
Re: GB: Copper modules - 5.6 & 9mm - $2

Blord said:
Of course these modules have inner thread. All modules do. :D
The modules in this GB don't have an outer thread for the back housing.
It is the most right module.
Click to expand...

I know, right? I was like duh... well that doesn't seem right. I'll never need to ask this question again. though. :)
 
SixTee9

SixTee9

0
Joined
Jan 26, 2013
Messages
505
Points
0
Re: GB: Copper modules - 5.6 & 9mm - $2

I think I'm going to try to start building a few to see how it works so this will be my first part I will buy and then I got a search for everything else. Also going to look in to a 3.2 what laserbee II Deluxe LPM!

I'm sorry I won't be able to be in this GB I need to learn more in building and studying before I jump in and drown, lol. I respect everybody and everything on LPF and sorry for backing out. I hope you understand

Thanks, Ron
 
Last edited:
Mohrenberg

Mohrenberg

0
Joined
Aug 30, 2008
Messages
6,891
Points
83
Re: GB: Copper modules - 5.6 & 9mm - $2

SixTee9 said:
I think I'm going to try to start building a few to see how it works so this will be my first part I will buy and then I got a search for everything else. Also going to look in to a 3.2 what laserbee II Deluxe LPM!

I'm sorry I won't be able to be in this GB I need to learn more in building and studying before I jump in and drown, lol. I respect everybody and everything on LPF and sorry for backing out. I hope you understand

Thanks, Ron
Click to expand...

NP at all.
 
JLM

JLM

0
Joined
Dec 4, 2011
Messages
269
Points
0
Re: GB: Copper modules - 5.6 & 9mm - $2

Please put me down for 10 modules.

2 x 9mm
8x 5.6mm

Thanks
 
awillis2589

awillis2589

0
Joined
Jun 21, 2012
Messages
2,019
Points
48
Re: GB: Copper modules - 5.6 & 9mm - $2

Could you put me down for:
5-5.6mm
5-9mm
 
Last edited:
sinner

sinner

0
Joined
Oct 27, 2011
Messages
2,565
Points
83
Re: GB: Copper modules - 5.6 & 9mm - $2

Mohrenberg said:
I won't be doing 3.8mm modules this run.
Only 5.6mm & 9mm.
Starting is going to be $2ea. + actual shipping cost.
...
Prices are based on.....
Click to expand...

I think you may have missed that in the OP
 
You must log in or register to reply here.




Top