►CLOSED AMK GB◄ ~ SF-AW210 Diodes $10 Each

amkdeath · Jul 11, 2010

Kiyo the one sled is still available. Just send payment if you want it, and I will ship your two extra sleds off on monday.

LASER66 · Jul 12, 2010

AMK:

I got may packages Saturday. Thank you!!

I'd be up for another Batch, as mine are essentially gone already.

Will

kiyoukan · Jul 12, 2010

sorry to ask,
So when will my 3 sleds be arriving?
all at once one after another?
just wondering.

Bionic-Badger · Jul 12, 2010

amkdeath said:
Wait... I was about to take the diodes over to the post office when I found a discrepancy in the final count...

Badger was put down for 3 on the first page but I received payment for one... did he post saying he only wanted one?!?! if so I now have 2 sleds that need to be sold ASAP... US buyer preferred.

Hmm, you're right. Man, I thought I paid for three, but from the bill, yup, just one. I must not have put the quantity in right or something. Stupid me! :\

Wow, my one sled arrived today. It's like those Chinese went to great lengths to smash up the sled as much as possible. All of the diodes and their ribbons were completely detached from the sled.

Oh yeah, and thanks for your hard work amkdeath. I dropped the ball on those other two sleds.

lazeerer · Jul 12, 2010

Just got mine in Today Thanks alot for this GB and Thanks alot of the fast shipping. I am Very Happy!!!

:gj:

jmgallego · Jul 13, 2010

Bionic-Badger said:
Wow, my one sled arrived today. It's like those Chinese went to great lengths to smash up the sled as much as possible. All of the diodes and their ribbons were completely detached from the sled.

Mine got in today!! The first picture is from the outside of one of them, looks pretty much like previous GB ones, no suprise there, quite smashed up.

However, in one of them I found nice surprise inside!! Filled what looks like vomit!!! It really is disgusting :barf:

Oh... so you want a close up??!! Here you go

:barf:

I don't think I can salvage anything on the right side.

Oh... did I mentioned that small bad... :barf:

In any case, thanks for your hard work amkdeath!!

kiyoukan · Jul 13, 2010

i got one of my 3 in today, looks like the first one i got no complaints cant wait for the other 2.

Pontiacg5 · Jul 13, 2010

Whow, sled puke for the loss?

In one of my sleds the red diode is not even soldered to the ribbon, its just sitting there next to it (win!)

Another one has no salvageable optics, but the other two have most everything still intact (double win!)

Thanks again for doing this buy!

rev0 · Jul 13, 2010

Got mine in the mail today as well! No sled puke thankfully!

Sleds:

Total Winnings:

6 Diodes (IR(?), Bluray, Red):

Extracted diodes:

Great doing business with you AMK, thanks!

Cheech · Jul 13, 2010

Wow rev0 you got some good ones.
My first order I could just shake the sled and the diodes just fell out.
Not one optic was missed by the sledge hammer

Recieved today they look great.

LASER66 · Jul 13, 2010

I don't think I can top the puke either. with 2o sleds, nearly all 405 diode blocks were loos with a few aluminum sleds shattered- yes, it made extraction as simple as shaking out the parts.

With the 405 diode removal from the blocks, I did not even need to cut the sides of the rectangular block. Is that what others have seen? I just grabbed both sides with vice grips, twisted slightly and bent the blocks (more like stressing them) away from the diode leads. The diodes mostly slipped out with tweezers.
I have used a diamond wheel on a dremel before for these types of blocks, but this was not needed on these (like we do for PHR's).

rev0 · Jul 13, 2010

LASER66 said:
I don't think I can top the puke either. with 2o sleds, nearly all 405 diode blocks were loos with a few aluminum sleds shattered- yes, it made extraction as simple as shaking out the parts.

With the 405 diode removal from the blocks, I did not even need to cut the sides of the rectangular block. Is that what others have seen? I just grabbed both sides with vice grips, twisted slightly and bent the blocks (more like stressing them) away from the diode leads. The diodes mostly slipped out with tweezers.
I have used a diamond wheel on a dremel before for these types of blocks, but this was not needed on these (like we do for PHR's).

Yup. I searched for an extraction video on Youtube and thought to myself, "wow, that easy?", and it certainly was. Just had to twist it back and forth a bit and the diode slid out cleanly (though one of them required more twisting than the other 3).

532 with Envy · Jul 14, 2010

Got mine in the mail today....thanks again for the group buy!...Looks like the diodes are in good shape....some of the optics are broken,,,but o-well!....
Thanks
Carl

amkdeath · Jul 15, 2010

Sled puke.... wtf...

I donno what to say, It's partially the reason why I stopped this GB. It seemed like after every batch the sleds got worse and worse. The first batch had about 30 perfectly new sleds, then the rest were a little damaged. Batch two had some more severely damaged sleds, but all optics and diodes were harvest-able. This batch has a sled with "puke" in it. Yea....

the three sleds that were bought (kiyo, etc) will be shipped out tomorrow, I am sorry. I was visiting campuses for College, and I will be off of the LPF from Friday to the following thursday, as I am visiting some east coast campuses.

kiyoukan · Jul 15, 2010

hey if they got what you want check out Oakland university, not a bad place i would be there if i can get a bit more money.
gl on your hunt.

roddenberry · Jul 16, 2010

Merchandise received this morning. many thanks sir!

Will put it away for some early autumn projects.

Robert

►CLOSED AMK GB◄ ~ SF-AW210 Diodes $10 Each

amkdeath

0

LASER66

0

kiyoukan

0

Bionic-Badger

0

lazeerer

0

jmgallego

0

kiyoukan

0

Pontiacg5

0

rev0

0

Cheech

0

LASER66

0

rev0

0

532 with Envy

0

amkdeath

0

kiyoukan

0

roddenberry

0

Online statistics

Forum statistics

Share this page