Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

looking for ANSI standard, Z136.4/3

Joined
Nov 14, 2010
Messages
30
Points
0
I'm curious what the safety standards are for building a Class 4 laser. I was directed to document:" ANSI standard, Z136.4" google didnt show me anything consistent. any of you have access to the above?
 





HIMNL9

0
Joined
May 26, 2009
Messages
5,318
Points
0
Considering that these documents are sold at high prices (usually around 150$ for the ".4" only part, and over 300$ for the ".1-.4" set (the ANSI site sell them for $336 ..... cheap, for a 3Mb document :p), is not so difficult to see why there's no copies from google :whistle: ..... :D

Probably you can find more about this from some universities sites, that uses ANSI standard documents, and cites them in their own articles ..... i've found that this searchengine site sometimes have some decent links from universities documents, as example, but my english is relatively low, so you have to judge yourself if the results worth the effort.
 




Top