Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Laser Noob Safety Questions

B

BEARS ARE PEOPLE TOO

0
Joined
Apr 20, 2016
Messages
21
Points
0
Hey all! I recently purchased a 1.6W 445nm laser and I already bought these, but after reading some of these stories about close call or actually getting hit in the eye I am terrified! :cryyy: So I wanted to know every precaution i need to take before using the laser (when it arrives). Do you have to wear the goggle at all times? Every single time you use the laser glasses need to be on? Is it dangerous to even look at the beam off a piece of paper or bouncing off of anything? Even though the beam isn't reflecting directly into your eye? Do you need them when shining it at night? or burning stuff at a distance? What distance is safe to look at the beam? Any other info would be great!
 





Razako

Razako

0
Joined
Mar 17, 2006
Messages
4,301
Points
113
You need them if you're burning with it, or shining at nearby objects. You don't need them to just look at the beam or point at far off objects.
 
Pi R Squared

Pi R Squared

0
Joined
May 14, 2013
Messages
3,438
Points
0
BEARS ARE PEOPLE TOO said:
Hey all! I recently purchased a 1.6W 445nm laser and I already bought these, but after reading some of these stories about close call or actually getting hit in the eye I am terrified! :cryyy: So I wanted to know every precaution i need to take before using the laser (when it arrives). Do you have to wear the goggle at all times? Every single time you use the laser glasses need to be on? Is it dangerous to even look at the beam off a piece of paper or bouncing off of anything? Even though the beam isn't reflecting directly into your eye? Do you need them when shining it at night? or burning stuff at a distance? What distance is safe to look at the beam? Any other info would be great!
Click to expand...

Those safety glasses are just fine. It is safe to look at the beam, it is not safe to look at the dot up close and never when burning. If you use it outside at night no glasses needed unless pointing at something up close. There is no answer to how close is too close, it depends on the surface and focus but if it feels too bright to look at then it is, that little dot when focused can be brighter than the sun, if you're just pointing it across the room try not to look at the dot.

When using any laser without safety glasses be sure the laser will never slip out of your hand or roll off a table, this is when you have an accident and get flashed in the face.

Alan
 
EllyEnthusiastic

EllyEnthusiastic

0
Joined
Feb 17, 2016
Messages
279
Points
0
First-- It's awesome that you care about laser safety. +rep for that.

With a 1.6W laser, I second everything Razako said, with the added clarification that you cannot look at the dot at close range. It's like looking at the arc of a spot welder. At longer distances, it's okay, just be careful up close, even when you aren't burning stuff.
 
B

BEARS ARE PEOPLE TOO

0
Joined
Apr 20, 2016
Messages
21
Points
0
2spooky4me. How much exposure can cause some significant damage? Direct contact is not a worry cuz I'm probably going to lock this thing with they key, close the shutter, and remove the batteries every time I'm not using it XD... How many times would it take to damage your eyes by looking at the reflected beam too close. Also, how far away can this laser burn stuff exactly?
 
WizardG

WizardG

0
LPF Site Supporter
Joined
May 9, 2011
Messages
1,189
Points
113
"How many times would it take to damage your eyes by looking at the reflected beam too close."

Once is all it takes. Never allow yourself to become complacent. I got the ol' time safety glasses religion after a reflection off of a shiny paperback book cover on the other side of my bedroom nailed me straight in the face for just a fleeting moment. + rep for asking good questions before you get your laser.
 
Last edited:
Razako

Razako

0
Joined
Mar 17, 2006
Messages
4,301
Points
113
BEARS ARE PEOPLE TOO said:
2spooky4me. How much exposure can cause some significant damage? Direct contact is not a worry cuz I'm probably going to lock this thing with they key, close the shutter, and remove the batteries every time I'm not using it XD... How many times would it take to damage your eyes by looking at the reflected beam too close. Also, how far away can this laser burn stuff exactly?
Click to expand...
Eye damage can happen very quickly or instantly if you exceed the safe exposure level. If the spot on an object appears too bright, then it probably is too bright to look at. Past 100 feet you should generally be fine as long as the objects are non-reflective. Generally you'll want to wear goggles for almost any indoor usage. Basically a common sense kind of thing. The range it can burn at will depend on how you set the focus. Once you get it, you'll see how to set the focus at certain ranges.
 
Last edited:
B

BEARS ARE PEOPLE TOO

0
Joined
Apr 20, 2016
Messages
21
Points
0
hmm. i'll have to play around with that then. Generally speaking how far can a 1.6W laser burn stuff. how have other 1.6 w lasers performed at a distance?
 
B

BEARS ARE PEOPLE TOO

0
Joined
Apr 20, 2016
Messages
21
Points
0
O.O Ok welp now I'm hella spooked. I think i'll just attach the keys for the laser to the glasses XD. No glasses. No laser.
 
Pi R Squared

Pi R Squared

0
Joined
May 14, 2013
Messages
3,438
Points
0
BEARS ARE PEOPLE TOO said:
hmm. i'll have to play around with that then. Generally speaking how far can a 1.6W laser burn stuff. how have other 1.6 w lasers performed at a distance?
Click to expand...

I have a 1.5W build 445nm M140 diode, it was my first powerful laser. I have never tested it for distance burning but it is definitely more than 10 feet. To burn better, buy a tripod and a clamp to hold your laser and burn stuff that way instead of holding it in your hand and it will burn faster because the dot is motionless in one place.

BEARS ARE PEOPLE TOO said:
O.O Ok welp now I'm hella spooked. I think i'll just attach the keys for the laser to the glasses XD. No glasses. No laser.
Click to expand...

I frequently use my lasers without glasses because I like to see the beam, but I am not recommending you do that, when you do just make sure there is no chance of an accident, and watch out for mirrors and glass, if you don't feel you can safely do it then don't.

If you want something that can burn at a long distance then get a 405nm for your next laser.

Alan
 
Pman

Pman

0
Joined
Nov 28, 2012
Messages
4,447
Points
113
I read somewhere that it takes around 100 seconds to damage your eyes looking directly at the sun. Seems hard to believe. Also hard to believe you could stand looking at it that long.
Reminds me of this neat movie I have called Sunshine. Check it out. My bet is most people have never seen or heard of it but it's really interesting with an unexpected twist.
I also use my lasers mainly to see the beam without glasses. Don't really care about burning. I wouldn't be involved in this hobby at all if everything was just a low powered dot. Grew up reading and watching Sci-fi stuff and a laser beam was always fascinating. Unfortunately I can't set any of mine to stun, kill or vaporize.....yet :D
 
Last edited:
Lifetime17

Lifetime17

0
Joined
Dec 15, 2014
Messages
6,783
Points
113
Yes plain and simple safety glass and you have no worries about damaging your eyes. As far as burning yourself well that's self inflicted and you should be careful but it won't kill you.

Rich:)
 
You must log in or register to reply here.




Top