Review of the Wicked Lasers Sonar Blu-ray Laser Module

* IMPORTANT: Pricing is accurate as of 11-02-10. Please visit the Currency Calculator for the latest currency conversion rates from US dollars to Chinese yuan.
This is a violet-emitting portable laser based on the Sony Blu-ray laser diode — the first commercial portable (self-contained) Blu-ray laser pointing device —
that I'm aware of anyway.

It comes in a handsome aluminum body with the "Wicked Lasers" and "Blu-ray" logos smartly laser-engraved into it, and feeds from two CR123A cells.

As I stated earlier, it uses a Sony Blu-ray laser diode that is reported to output 20mW of laser radiation at 405nm in the violet part of the spectrum. Because it is at the violet end of the spectrum, it will not be as visible mW-per-mW as blue, green, yellow, or red laser pointers, but the color is absolutely gorgeous, and is very radiant and unusual for a handheld laser.

Blu-ray laser diodes (400-410nm) are currently so hard to come by that Wicked Lasers (and anybody else who makes laser modules/pointers out of these diodes) disembowels Blu-ray disc players and (not Wicked Lasers but some other individuals) PS3 video game consoles specifically to harvest the rare & expensive Blu-ray violet-emitting laser diodes from them.

This is only the second Blu-ray laser module I've seen; this is the first — it is a homemade device. I was able to get this web page published so quickly after receiving the Sonar because I was able to use the other Blu-ray laser's web page as a template and because I went to the Sonar's web page for pricing info, information on the Sonar's TEM (transverse electromagnetic mode), beam divergence, and things like that. So I only needed to add product photographs, optical & electrical measurements, spectroscopy, and text specific to the Sonar itself (like the fact that it is pulsed, not CW).

The beam is rapidly pulsed, not CW (continuous wave), so you'll see a dotted line on the target when the laser is rapidly waved about.





SIZE



Feed the laser module a pair of CR123A cells (not included) (see below), remove the purple plastic cover from the laser aperture (the hole in one end), and then you'll be ready to rock.

To use the laser module, just aim it at something you wish to point out, and press & hold down the button on the barrel for as long as you need the violet laser spot. Violet laser radiation will literally pour out of the "business-end" for as long as this button is held down. Release the button to turn the laser module back off. Yes, it really is as easy as that.

The laser module comes with a hinge-lidded presentation case (that has a magnetically-closing lid) with a foam cutout for the module. You may store the Sonar in this case if desired.




To change the batteries in your Wicked Lasers Sonar, unscrew and remove the tailcap, and set it aside.

Tip the two used CR123A cells out of the barrel and into your hand, and dispose of, recycle, or recharge them (only if they're rechargeables!) as you see fit.

Insert two new CR123A cells into the barrel, button-end (+) positive first. This is the opposite of how batteries are installed in most other laser pointers/laser modules, so please pay attention to polarity here.

Screw the tailcap back on, and be done with it.


Current usage measures 41.6mA on a set of known-new WF brand CR123A cells.


The website does not state not to use rechargeables; there is a circuit that pulses the laser diode so it *SHOULD* be ok to use them.
But I can offer no guarantees here...do so at your own risk until or if I hear otherwise.

I also do not know if reverse-polarity protection (mechanical or electrical) is present in the Sonar; I'd rather not risk the destruction of an irreplaceable $2,000.00 laser just to find out.
(Update 06-26-07): If the Sonar has reverse-polarity protection, it is *not* mechanical. I determined this by intentionally installing the batteries backward and metering for voltage between the battery's exposed (+) positive nipple and the laser's case, and found close to 6 volts when the button was pressed. The DMM's series resistance (when set to the +40 volts scale) was enough to protect the Sonar's circuit here.

(Update 07-03-07): My contact at Wicked Lasers says a rather emphatic "NOOOOOOOOO!!!" for use of both RCR123A rechargeables and reverse-polarity protection; the Sonar has not been tested with/for either. At $2,000.00 a pop, I can understand - it could be what $4,000.00 whirling down a {white porcelain fixture used for defecation} looks like.


***EXTREMELY IMPORTANT!!!***
This laser is a CDRH Class IIIb instrument, and the photons generated by it are much higher in energy than the photons generated by a red laser of equivalent power; so you definitely do not want to shine it into your eyes, other people's eyes, pets' eyes, for that matter, the eyes of any person or animal you encounter. Eye damage can occur faster than the blink reflex can protect them, regardless of what species' eyes you irradiate with this laser. So just don't do it.
And fer chrissakes (and for heaven sakes and for Pete sakes and your sakes too) do not shine this laser at any vehicle, whether ground-based like a motorcycle, car, or truck, or air-based like a helicopter, airplane, or jet. And if you shoot it at a person in the dark and he turns out to be a police officer, he may think he's being targeted, unholster (pull out) his gun, and hose you down with it.


EXTREMELY, VERY IMPORTANT!!! I know I just said this, but it bears repeating: You MUST NOT shine it in your eyes, not even when the Sonar's batteries have pooped out and it is below lasing threshold!!!!!!!!! You will have bright, long-lasting (several days!!!) afterimages if you do!!! The human eye was not designed for wavelengths much below 420nm in the blue-violet region of the spectrum.

This is a CDRH Class IIIB laser device. Treat it with respect, and it'll treat you with respect.

The case is made from 6061-T6 Aircraft-Grade Aluminum, and is both tough and looks nice.

The beam has a divergence of 1.5mRad (milliradians), and has a diameter of 2.50mm when it exits the product.
According to the web page on the Sonar, it produces a TEM00 (transverse electromagnetic mode 00) beam — that is, it produces a beam with a Gaussian power distribution; circular with a central hotspot and dimmer corona. This is a typical laser mode, and is how many lasers (well, most lasers for consumer use anyway) are designed to operate.

The beam from the Sonar is not perfecly circular; it is oval (somewhat egg-shaped) like beams from all directly-injected diode lasers that do not have special beam shape corrective optics.

The beam emerges from this laser larger in diameter than is usual for pointer-style lasers, but the beam "waist" (the smallest beam diameter) occurs approximately 6 feet away. At ~18 feet, the beam diameter is still smaller than it is at the laser aperture.

Visibility of the Sonar's spot is similar to a 1mW to 2mW red diode laser, but it can do something that *NO* red laser can: it causes fluorescence (glowing) in many colored objects and white paper.

At normal viewing distances (~6 feet to ~100 feet), the beam spot may have a "furry" or out-of-focus appearance to it. This is *NOT* a fault of the Sonar (it's quite well collimated actually), it's because human eyes can't properly deal with deep violet light and cannot focus correctly on it, even if the Sonar's spot is the only object visible.

Because of the low current usage, battery life should be quite a long time — more than other laser pointers — including those red ones that use two AAA cells.

Do ***NOT*** unscrew the front cap while the batteries are installed; doing so may cause the laser to malfunction (it became stuck in the "on" position in my case); this was remedied by screwing the front cap firmly back in place.
Although this may indeed work (it worked with my laser), it is not guaranteed to work.
If you removed the cap with batteries in the laser before reading not to do that here, that's ok.
But if you did that after reading about me telling you not to, then shame on you!!!

There is no CDRH laser warning label on the Sonar itself or on/in the presentation case (yes, I even removed the foam insides to look underneath). However, I will not consider this a negative because Blu-ray lasers are still so new and it is entirely within the realm of possibility that a label reading "Diode Laser 405nm" has not yet even been created.

This is a pulsed laser, not a CW laser...why the Sonar is pulsed I don't yet know. It has been proven that Blu-ray laser diodes do well in continuous mode; perhaps it was done to increase diode life.
I've never measured a pulsed laser before, so I had to enlist the aid of a laser expert to get the job done properly.

After I heated the Sonar to raise its temperature to 96°F (35.5°C), I measured its power output at 2.897246mW. This is average power; peak power is 17.38mW.

I would have liked it if the word "SONAR" was laser-engraved on the laser, but this is just personal preference, and in no way does it affect how I feel about the laser.

Walking around with the Sonar is like walking around with a laser "blacklight"...you'll end up shooting it at a lot of objects to see if they fluoresce (glow), and a surprising number of objects *DO* fluoresce! Many types of white paper glow a brilliant whitish-blue, and many "day glow" plastic items glow very brightly when irradiated by the Sonar's 404.6nm (yes, measured spectroscopically) violet laser radiation!!!

Battery and switch button rattle is totally nonexistant. I shook the Sonar quite vigorously both vertically and horizontally, and did not detect any sound.

The Sonar has three circumfrential ridges in its body; so retention (the ability to hold on to the product when your hands are cold, oily, or soaked with water) should not be an issue.

The Sonar is a wonderful laser, and to use "1337 5p34k" ("leet speak"), "this laser ROXORS!!!"










TEST NOTES:
Test unit was sent by Steve of www.wickedlasers.com and was received on 06-18-07.

Product was made in China.
A product's country of origin really does matter to some people, which is why I published it on this web page.


* How I measured its power:
1: I irradiated the sensor of a Sper Scientific model # 840011 laser power meter with the Sonar for 60 seconds (1 minute).
2: I multiplied the maximum reading of 1.448 by 10 to arrive at 14.48.
3: I then multiplied this by 0.1667 (the laser's duty cycle) to obtain the final reading of 2.413816mW.



UPDATE 06-20-07:
I have decided to rate the Sonar 4 1/2 stars and place it in The Trophy Case on this website!!!

The primary reason it did not receive five full stars is the cost: almost two grand!!! For a handheld laser!!!

UPDATE 06-23-07:
This website shows how the Sonar comes to life — Blu-ray laser disc drives are disembowelled for their precious cargo — the expen$ive Blu-ray laser diodes of course.



UPDATE 06-23-07:
No, you're not seeing things.
Yes, a same-day update.
I have decided to increase its rating from 4 1/2 stars to 5 stars...cost is a rather irrelevant issue here, and should not be affecting my judgement on this laser.



UPDATE 06-24-07:
From Jack O'Neil at Optotronics (a person who knows his {vulgar term for feces; rhymes with pit} about things that lase) comes this:

Hi Craig, I wanted to chime in on the way output power is calculated for a pulse laser.
RMS is for AC waveforms, this is because for part of the cycle the current is going in the opposite direction and thus goes below zero and then to a negative value.

With laser diodes, the current will only flow in one direction (that's what a diode does). So instead of RMS, you need to use the average output power during the "on time" of the laser and multiply that by the duty cycle of the laser pulses.

The duty cycle of the laser can be calculated by measuring the ratio of the on/off time in your picture above.
Your picture shows a slow fall time/decay, this is an effect of the solar cell, perhaps it is being oversaturated and falls slowly.
So, to find the duty cycle, the "on time" is from the point when the positive edge of the pulse begins to the point where the pulse no longer is at it's flat positive value and begins it's decay.

This measurement can even be done from your browser screen as it is only a ratio and not affected by size or even if the aspect ratio of the picture was changed.

I used my digital caliper and measured the length of the "on pulse" as 5mm. I then measured the length of one positive pulse edge to the next positive pulse edge, this length was 30mm. This gives a duty cycle of 16.67% for the Sonar.

Now to figure out the power output.
A meter that uses a thermal sensor is usually the most accurate, but you have to look at the specs of the meter and see what the integration time of each sample is and to make sure the pulse rate of the laser is much faster than the integration time; it's best if pulse rate is at least 10x the sample integration time as this will reduce the margin of error to a much lower level.

Actually, since this laser has a pretty flat (peak), a lasercheck (which measures (peak value over 2 second time period) will work good or you could use a thermal meter that records peak value over time as well.

The output power would them be calculated by multiplying the lasercheck reading by 0.1667 to find the true average output power/energy. If your meter is recording a peak value like most inexpensive silicon meters do; the 11.6mW you measured at room temperature is really only 1.93mW and the 17.38mW at high temperature converts to 2.89mW.

You had asked why the laser was being pulsed when they could be used CW.
Well, it is done to save money.
It takes extra components to make the laser pulse on and off and these cost money, but this allows the use of a lower power diode and this can save a huge amount on the final build cost. This way a lower power rated diode can be overdriven by a great deal if the duty cycle is short like the 16.7% shown here. With this duty cycle, the diode can be overdriven by 6x it's CW rate because the diode can be cooling off for 5/6 of the time and the average power rating is never exceeded.

Thanks Craig for doing this review.
Jack





UPDATE 06-25-07:
Beam divergence appears to have slightly but noticeably increased over the last couple of days. Disassembling (removing the tailcap, batteries, and front cap) & then reassembling the Sonar in reverse order appears to have had no effect. The beam is "waisting" closer to the laser; at ~18 feet, the beam is now a little larger than it is at the aperture; it was a little smaller than it was at the aperture before.





UPDATE 06-25-07:
No, you aren't seeing things.
Yes, a same-day update.
The beam waist (the point at which the beam is at its smallest diameter) is now 7 feet, instead of the 6 feet it was earlier today. So diassembling (removing the tailcap, batteries, and front cap) & then reassembling the Sonar in reverse order did make a minor improvement. This tells me that the overall divergence would be slightly lower.





UPDATE 06-25-07:
No, you aren't seeing things.
Yes, another same-day update.
After I once again wrapped the Sonar in some store brand nasal tissue (functionally identical to Cleanax) and put it "where the sun don't shine" (once again get your mind out of the gutter!!! I did not place it in my bunghole!!! I just didn't want to put the Sonar in the oven!!!) to raise its temperature to 93°F (33.9°C) to see if there was any change in beam size at short distance, the beam was just slightly larger than it is at lower temperatures. This also tells me that the overall divergence would be slightly lower.




UPDATE 06-25-07:
No, you aren't seeing things.
Yes, a TWELFTH same-day update.
I attempted to use a small screwdriver to screw the lens assembly inward slightly, and was not successful.
Actually, I *did* meet with some limited success; the beam spot appears approximately the same size at ~18 feet as it does at exit.





UPDATE 06-26-07:
Beam waisting now appears to occur ~8 feet away from the laser aperture.





UPDATE 06-27-07:
Wicked Lasers will be coming out with a "Blu-ray Burner" edition of this laser sometime in the near-future.
It will be considerably more powerful than the Sonar on this web page.





UPDATE 06-28-07:
Just an observation here...not impirical science. Holding the Sonar feels like holding a small piece of the future. I remember purchasing a red laser pointer around 1990; it cost almost $500.00 for a 3mW 650nm unit. It came with a 30 day money back guarantee, so on day 30, I returned it, giving some bull{vulgar term for feces} excuse like "it's just not bright enough" or some such horse puckey. I would have never even *DREAMT* that a true handheld violet laser would exist in my lifetime...but look!!! We now have the Sonar!!!

Just think...only 17 years from red diode lasers produced en masse to violet diode lasers!!!
When green lasers came out, I thought they were "the bomb". Same with yellow lasers and blue lasers. Now that the violet laser is here, I once again think it's "THE BOMB!!!".





UPDATE 06-29-07:
Just a random measurement here...I saw the laser, and saw the power meter, and thought to myself "I think I'll take a measurement" and I did.
Measures 2.347136mW.

How I measured its power:
1: I irradiated the sensor of a Sper Scientific model # 840011 laser power meter with the Sonar for 60 seconds (1 minute).
2: I multiplied the maximum reading by 10.
3: I then multiplied this by 0.1667 (the laser's duty cycle) to obtain the final reading of 2.347136mW.



UPDATE 06-29-07:
No, you aren't seeing things.
Yes, a same-day update.
You must not *** UNDER ANY CIRCUMSTANCES *** use the Sonar as a pet toy!!!

Even though the average power output is just ~2.5mW, the peak power is consistently over 14mW, and that much laser power makes using the Sonar as a pet toy a rather severe no-no!!!

UPDATE 07-01-07:
O NOOOOOO!!!

The switch appears to be failing - if it is pressed with moderate force, the laser comes on, but if it is pressed quite firmly (but not so firmly as to risk switch breakage), the laser sometimes brightens quite noticeably. Because of this unwanted behaviour, I have little choise but to derate it by one half star (from five stars to four and a half) - continued malfunction will derate it farther and result in the Sonar's removal from The Trophy Case on this website. A $2,000.00 laser should ***NOT*** do this.

UPDATE 07-01-07:
No, you aren't seeing things.
Yes, a same-day update.
The Sonar does not behave this way *ALL* of the time, just *SOME* of the time.




UPDATE 07-01-07:
No, you aren't seeing things.
Yes, another same-day update.
Sometimes, the solution to the most vexing problem can be the simplest.
In this case, if you press the button fairly firmly right from the get-go, this issue may never come up in your Sonar.





UPDATE 07-01-07:
No, you aren't seeing things.
Yes, yet another same-day update.
The beam divergence appears to have decreased slightly. At ~18 feet, the beam diameter is smaller than it is at the laser aperture; and at ~49 feet, the beam spot appears smaller than it did several days ago.
Laser temperature was 82°F (27.8°C).





UPDATE 07-01-07:
No, you aren't seeing things.
Yes, yet another same-day update.
At ~18 feet, the beam diameter is even smaller than it is at the laser aperture than it was earlier today.
Laser temperature critical

...er...uh...laser temperature was 82°F (27.8°C).





UPDATE 07-01-07:
No, you aren't seeing things.
Yes, YET ANOTHER same-day update.
At ~18 feet, the beam diameter is yet ***SMALLER*** than it is at the laser aperture than it was the last time I checked it today.
If I had to guess, the beam diameter is ~1.25mm at this point!!!

UPDATE 07-01-07:
No, you aren't seeing things.
Yes, YET ANOTHER same-day update.
From a Candlepower Forums member, comes this:

{quote text} RMS is for AC waveforms, this is because for part of the cycle the current is going in the opposite direction and thus goes below zero and then to a negative value. {end quote text}


Just so you know, this is BS. The waveform does certainly not have to be AC for RMS to become useful. Also, that the current is sometimes negative is hardly the problem why you want to measure with RMS as full-wave rectifiers have taken care of that problems since the early tube-times.





UPDATE 07-02-07:
O NOOOOOO!!!

The switch button on my Sonar no longer has that satisfying tactile "click" sensation that it had before. It still functions (as far as I can determine, properly), but it has a kind of "mushy" feel to it. This is totally unexpected from a $2,000.00 laser.





UPDATE 07-02-07:
No, you aren't seeing things.
Yes, a same-day update.
I just had a terrible dream. In this dream, I accidentally dropped my Sonar approximately 18" onto a concrete floor, and it no longer functioned. When I looked down the barrel (something I would *NEVER* do in the waking world!!!) and activated the laser, I could see a point of violetish-white light of a low enough intensity that it could be looked at indefinitely. The insides were also somewhat well-illuminated in this dream; in actuality, the insides would be nearly totally dark. The dream was vivid & realistic enough that when I awakened, I immediately went for my Sonar and blasted a wall with it just to be certain it still functioned.





UPDATE 07-02-07:
No, you aren't seeing things.
Yes, another same-day update.
I think I figured out what's going on with the switch. I believe the batteries are shoving the Sonar's internal laser module a bit too far forward. Loosening the front cap just one turn is all it takes for the laser to become "stuck" in the ON position now; this also explains why the switch button feels "mushy" and is more sensitive than it was before. I'm going to attempt to fashion a shim out of household aluminum foil to place inside the front cap - a washer would work better for this test, but I do not have or have access to any...o wait, I'll see if Longs Drugs has any when I go there in less than an hour...BBS...





UPDATE 07-02-07:
No, you aren't seeing things.
Yes, yet another same-day update.
I went to Longs Drugs, Raleys, Nugget Market, Radio Shack, Big Five, and Right Aid, and nobody had washers. There is no hardware store (Home Depot, Loews, Eagle, Ace, etc.) that I can get to, so I'm going to attempt to fashion a washer out of kitchen aluminum foil, and see if I meet with any success.





UPDATE 07-02-07:
No, you aren't seeing things.
Yes, yet another same-day update.
I had no success with the foil washer; if anything, it made things worse.

UPDATE 07-02-07:
No, you aren't seeing things.
Yes, yet another same-day update.
O NOOOOOOOO!!!!!!!!!!!!!!!!
The switch button has now fallen out of my Sonar!!!

I have it taped in now, and I'm going to (regretfully) remove some points off its rating and remove it from The Trophy Case on my website.

I have emailed my contact at Wicked Lasers regarding warranty service:


Hi {censored},

My Sonar Blu-ray Laser requires warranty service; the pushbutton has fallen out.
I have it taped on; the laser itself is still operational.

What is the procedure for obtaining warranty service?
And what address should I send my Sonar to?

Expect me to mail it no sooner than July 23; I probably will not have sufficient funds at my disposal until then.







UPDATE 07-02-07:
No, you aren't seeing things.
Yes, YET ANOTHER same-day update.
I have fastened the switch button with some Super Glue, so the tape is no longer necessary.



UPDATE 07-02-07:
No, you aren't seeing things.
Yes, AN EIGHTH same-day update.
Beam divergence appears to be at an all-time low!!!
Spot size at ~18 feet appears to be significantly less than 1mm.

Beam size at aperture is ~4mm by ~2.50mm.
Because the switch button was such an easy fix and because the beam divergence is lower than it has ever been, I'm going to increase its rating from 3 1/2 stars to 4 stars. Although this still does not place it back in The Trophy Case, a 4-star rating is certainly nothing for Wicked Lasers to hang their heads in shame over.




UPDATE 07-02-07:
No, you aren't seeing things.
Yes, A NINTH same-day update.
I'm normally pretty anal when it comes to examining & describing things on this website, but I see I failed to mention that the end cap has a threaded aperture. That is, the small hole is threaded inside, making it female in gender. The hole appears to have an ID (inside diameter) of 4.5mm.




UPDATE 07-03-07:
Power output measures 1.793692mW on batteries that have had ~2 minutes of prior use on them.
Peak power was approximately 10.74mW.




UPDATE 07-03-07:
No, you aren't seeing things.
Yes, a same-day update.
I have heard back from my contact at Wicked Lasers, and the "fix" I made to the switch button was the correct course of action; they would have done the exact same thing if I had returned my Sonar. The external switch button may have been glued on right from the get-go.




UPDATE 07-03-07:
No, you aren't seeing things.
Yes, another same-day update.
Now that I think about it (and "thinking" is never a good thing with me!)

, I honestly cannot remember if the switch had a tactile "click" sensation to it when actuated or not. So that "mushy" feeling I described in one of yesterday's updates might be at least somewhat incorrect.





UPDATE 07-03-07:
No, you aren't seeing things.
Yes, yet another same-day update.
After warming the laser to 92°F (33.3°C), the beam spot at 49 feet was ~0.4" (~10mm) in diameter; I believe this to be the smallest beam diameter at this distance I have seen to date.

UPDATE 07-03-07:
No, you aren't seeing things.
Yes, yet another same-day update.
I checked it just a short time ago for the possibility of cyanoacrylate vapour (from the Super Glue I used to repair the button with) clouding the lens and/or laser diode face, and found no evidence of that whatsoever. The laser beam is as "clean" now as it was when I received the Sonar.





UPDATE 07-04-07:
From somebody who knows his {vulgar term for feces} about lasers & optics, comes this:

"0.4 inch at 49 feet is .68 milliradian. A good Gaussian TEM00 beam of this wavelength with that divergence would diverge at that rate from a waist almost a millimeter in diameter.


If the waist is at 18 feet and the beam is 0.4 inch at 49 feet (31 feet from the waist), then the divergence is 1.07 milliradian. If the beam
is a nice Gaussian TEM00 one, then the waist diameter is about 0.6 millimeter.
The beam may have some astigmatism, with two oblong waists maybe 0.6-0.8 mm in the narrow direction and a little wider in the wide direction, with these ellipses perpendicular to each other. Between those may appear to be an "oversize" round waist if you don't check for an astigmatic waist pair (if you have that).
Many red diode lasers have astigmatism in addition to oblong beam divergence. The astigmatism, if corrected, is corrected by a "cylinder" lens (converges or diverges only perpendicular to a specific axis) or a "convex plus cylinder" lens (converges slightly more about one axis than the other)."




UPDATE 07-04-07:
No, you aren't seeing things.
Yes, a same-day update.
The beam probably *DOES* have some astigmastism - it is oblong (like many directly-injected lasers without corrective optics) rather than being circular like the beams of most small-frame plasma lasers. And the lens on the Sonar appears to be either plain old ordinary old PCX or DCX; however I can't tell for ***CERTAIN*** without destroying the unit.





UPDATE 07-07-07:
I measured 2.548843mW from the Sonar with new batteries.
I just saw the laser & meter there, and thought "I think I'll take a measurement" and so I did.
Remember, this is a pulsed laser; the peak power output for this measurement was 15.29mW.
Laser temperature was 92°F (33.3°C) for this measurement.




UPDATE 07-07-07:
No, you aren't seeing things.
Yes, a same-day update.
Beam waisting appears to be the longest and divergence the smallest when the laser temperature is between 90°F (32.2°C) and 95°F (35.0°C).





UPDATE 07-11-07:
I purchased some Panasonic brand CR123A cells on Ebay specifically for use in the Sonar, and they ***DO NOT FIT!!!*** These cells appear to be just slightly too large in diameter to fit the barrel.

I bought 30 of the little {vulgar term for intercourse}ers to use in this laser, so I had to go out and buy 20 more of another brand.




UPDATE 07-12-07:
In my opinion, this laser should have been called the "Pulsar", and the Pulsar should have been called the Sonar. The reason is that this laser (the Sonar) is pulsed, and the Pulsar is CW. Make any sense?




UPDATE 07-17-07:
The Powerizer brand CR123A cells I purchased on Ebay to replace the Panasonic cells do work in the Sonar.




UPDATE 09-03-07:
The switch appears to be flaky...as you can see in the movie clip below, the intensity varies depending on how hard you press the button.

WMP movie (.avi extension) showing the laser's brightness variations.
This clip is approximately 0.9 megabytes (959,178 bytes) in length; dial-up users please be aware.
It will take no less than four minutes to load at 48.0Kbps.
I cannot provide it in other formats, so please do not ask.

That sound you might hear is The Simpsons on the boob tube; the product
is not sound-sensitive, so you may ignore or mute the sound if desired.




UPDATE 09-26-07:
Beam waisting appears to occur approximately 18 feet (~5.4864 meters) from the laser aperture.
This means the overall beam divergence would be lower.




UPDATE 10-03-07:
I saw the Sonar sitting there, and I saw the laser power meter sitting there, and thought "I think I'll take a measurement", and so I did.
Measures 2.405481mW.




UPDATE 05-18-08:
I measured its power output at 3.560712mW (pulsed output was 21.360mW; I adjusted this to average power) after leaving it for awhile outdoors at a temperature of 102°F (38.9°C).




UPDATE 10-30-08:
This laser is now being offered for sale to help pay the electric bill before our power is disconnected - this is scheduled to occur on 11-01-08. Since I use an ***ELECTRIC*** wheelchair, this is a very critical - if not downright life-threatening situation.

UPDATE 11-24-08:
Forgot to add the dreadful "

*" icon next to its listings on this website.




UPDATE 05-07-09:
As you can see, I still have the Sonar.
The wayward electric bill was paid after other items were sold, so I did not have to let go of this wonderful little laser.




UPDATE 11-03-10:
The Sonar is no longer being sold, so the dreadful "

" icon will now be appended to its listings on my website.





PROS:
Color is very radiant & unusual for a handheld laser
Case is hefty and nice looking
Beam is "clean", with no visible speckling or artifacts around it
Potential for long battery life
Color is very radiant and unusu...o wait I said that already.

CONS:
Costs a lot of $$$, so please be careful with it
Not waterproof or submersible - but most lasers aren't. Will not figure into rating
Switch *MAY* be flaky - the Sonar is at extreme risk of falling out of The Trophy Case on this website.

MANUFACTURER: Wicked Lasers
PRODUCT TYPE: Portable violet-emitting laser module
LAMP TYPE: Sony Blu-ray laser diode
No. OF LAMPS: 1
BEAM TYPE: Very narrow spot; it's a laser, remember?

SWITCH TYPE: Pushbutton momentary on/off on barrel
CASE MATERIAL: Aluminum
BEZEL: Metal; has aperture (hole) for laser beam to emerge
BATTERY: 2x CR123A cells
CURRENT CONSUMPTION: 41.6mA
WATER RESISTANT: No
SUBMERSIBLE: NO WAY HOZAY!!!

ACCESSORIES: Presentation case
SIZE: 20mm D by 123mm L
WEIGHT: ~4.2oz (~119.06 grams) with batteries
WARRANTY: 90 days




PRODUCT RATING:

The_LED_Museum said:

Wicked Lasers Sonar Blu-ray Laser Module, retail 11,608.3 CNY ($1,732.19)* (www.wickedlasers.com...)
***VERY IMPORTANT!!!***
I RECEIVED THE SONAR IN MID-JUNE 2007; I'M NOT CERTAIN IF THIS LASER IS EVEN SOLD ANYMORE!!!

Click to expand...

I just don´t believe you that you didn´t have the time to check your own posted link to say that it is not sold any longer!

DJNY said:

I just don´t believe you that you didn´t have the time to check your own posted link to say that it is not sold any longer!

Click to expand...

I just checked the link, found that it was no longer there, and changed the text in my O.P. to read that it is no longer being sold.

And with tomorrow morning's updates on my website, all listings of the Sonar will be appended with the "" icon that indicates that the product bearing that icon is no longer being manufactured.

And yes, I was a bit strapped for time when I converted the evaluation on my website into BBCode to allow for posting on this BBS.

Wow $2000?

405s sure have come down in price lately glad that bluray isnt so expensive anymore

BTTT: Performed three power output stability analyses.