- Joined
- Jun 11, 2009
- Messages
- 1,252
- Points
- 63
I'm now a proud owner of 2 custom, machined aluminum hosts. These were made by laserpointerforums member Ehgemus.
He made both of these fine hosts together. to insure a more exact match.
One is his host for O-Like green modules.
Host for greens
http://laserpointerforums.com/f39/custom-host-o-like-module-41761.html
I wanted this host to be used with my new, 200mW O-Like green module. Should be here any day now.
Since the 200mW module is a little more power hungry, then most of the other O-Like modules. I asked Ehgemus if he could make the host for a 18650 cell. No problem was his answer, Sweet!
The second, Is his host for Aixiz Module.
Host for Aixiz
http://laserpointerforums.com/f39/custom-rpl-stile-host-aixiz-module-cr123-battery-43088.html
This one was sent to Mohrenberg for a GGW build
This was also made slightly different then his standard offering.
It was machined to make use of 2 cr123 cells.
These machined aluminum hosts. Are designed for very simple assembly.
You just slide the 532nm or aixiz module in place, and secure it with a small set screw. Your done, Thats it.
These custom hosts from Ehgemus are very nice.
Their single piece designs. Where only the battery cap on the bottom unscrews. The threading for the tail cap has been machined with care. No scraping or dragging, with mismatched threads.
The seem is almost invisible when screwed together. The host uses a rear tail clicky recessed in the tail cap.
The front of the host is very thick. This allows for great heat sinking abilities for both the Aixiz and 532nm module.
The Axiz module has a nice snug fit. I might apply some dielectric grease down the road, but see no real need for it now. Maybe if i upgrade to a 8x diode.
Both of these host were only $35 each, that price includes shipping
Ehgemus was a pleasure to do business with. Service was fast, about a week from time of order to time of delivery. Very Nice!
He made both of these fine hosts together. to insure a more exact match.
One is his host for O-Like green modules.
Host for greens
http://laserpointerforums.com/f39/custom-host-o-like-module-41761.html
I wanted this host to be used with my new, 200mW O-Like green module. Should be here any day now.
Since the 200mW module is a little more power hungry, then most of the other O-Like modules. I asked Ehgemus if he could make the host for a 18650 cell. No problem was his answer, Sweet!
The second, Is his host for Aixiz Module.
Host for Aixiz
http://laserpointerforums.com/f39/custom-rpl-stile-host-aixiz-module-cr123-battery-43088.html
This one was sent to Mohrenberg for a GGW build
This was also made slightly different then his standard offering.
It was machined to make use of 2 cr123 cells.
These machined aluminum hosts. Are designed for very simple assembly.
You just slide the 532nm or aixiz module in place, and secure it with a small set screw. Your done, Thats it.
These custom hosts from Ehgemus are very nice.
Their single piece designs. Where only the battery cap on the bottom unscrews. The threading for the tail cap has been machined with care. No scraping or dragging, with mismatched threads.
The seem is almost invisible when screwed together. The host uses a rear tail clicky recessed in the tail cap.
The front of the host is very thick. This allows for great heat sinking abilities for both the Aixiz and 532nm module.
The Axiz module has a nice snug fit. I might apply some dielectric grease down the road, but see no real need for it now. Maybe if i upgrade to a 8x diode.
Both of these host were only $35 each, that price includes shipping
Ehgemus was a pleasure to do business with. Service was fast, about a week from time of order to time of delivery. Very Nice!
Attachments
Last edited:
