Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Jayrob Maglite 4D kit 445nm 3x26650 LiIon 1.72A est.1.8W - 2W lens dependent

LiquidLife

LiquidLife

0
Joined
Oct 9, 2010
Messages
66
Points
0
Re: Jayrob Maglite 4D kit 445nm 3x26650 LiIon 1.72A est.1.9W

Great find on those batteries, I didn't even know D size Li-Ion batteries like that existed.

The build will be less work now that you don't need to modify the - end cap, or make a fiberglass tube.
 





LiquidLife

LiquidLife

0
Joined
Oct 9, 2010
Messages
66
Points
0
Re: Jayrob Maglite 4D kit 445nm 3x26650 LiIon 1.72A est.1.9W

I'm having issues Jayrob...





















































I JUST CAN'T STOP LASING!
 
jayrob

jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
Re: Jayrob Maglite 4D kit 445nm 3x26650 LiIon 1.72A est.1.9W

Ha ha! I was going to say, what happend? Did you catch your garage on fire with that monster? :crackup:

Your having too much fun with that thing!
 
DTR

DTR

0
Joined
Jun 24, 2010
Messages
5,684
Points
113
Re: Jayrob Maglite 4D kit 445nm 3x26650 LiIon 1.72A est.1.9W

Man you are having way too much fun over there.:D
 
LiquidLife

LiquidLife

0
Joined
Oct 9, 2010
Messages
66
Points
0
Re: Jayrob Maglite 4D kit 445nm 3x26650 LiIon 1.72A est.1.9W

:eg:

Check this out, it's as if it was all meant-to-be. Notice anything funny?


IMG_20101112_202804.jpg
 
jayrob

jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
Re: Jayrob Maglite 4D kit 445nm 3x26650 LiIon 1.72A est.1.9W

I swear I didn't put that there!

Lol...

Strange coincidence... :crackup:

What's also a strange coincidence, is that I grew up in Ontario, CA! We moved there from Honolulu when I was about 2 years old, and then moved to N. CA when I was about 7...
 
Last edited:
LiquidLife

LiquidLife

0
Joined
Oct 9, 2010
Messages
66
Points
0
Re: Jayrob Maglite 4D kit 445nm 3x26650 LiIon 1.72A est.1.9W

I grew up in Northern CA (NAPA). I don't know where Oakley is though, I'm not sure if I've ever been there.

Ah, riverside county. I actually like the desert... aside from that though, I could do without riverside county.
 
jayrob

jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
Re: Jayrob Maglite 4D kit 445nm 3x26650 LiIon 1.72A est.1.9W

Oakley is not far from Napa...

Probably about 45 minutes drive south east, just over the Rio Vista bridge...
 
LiquidLife

LiquidLife

0
Joined
Oct 9, 2010
Messages
66
Points
0
Re: Jayrob Maglite 4D kit 445nm 3x26650 LiIon 1.72A est.1.9W

Regarching batteries, and had to come into work today, full review tomorrow for sure!
 
jayrob

jayrob

0
Joined
Sep 21, 2007
Messages
9,862
Points
113
Man that new video with the 405-G-1 is crazy! :cool:



FlexModP3:

If you want to set up your own FlexModP3 driver, DTR has a tutorial shown here:
http://laserpointerforums.com/f51/how-set-up-flexmod-p3-handheld-laser-56572.html#post798901

There was a little confusion on exactly what resistor to use for the V+ to Mod+ jumper, so I contacted drlava, and told him that I wanted to use a resistor that would allow either 2 X Li-Ion's, or 3 X Li-Ion's to be used. (just to avoid confusion, and set it up the same way for either build)

So that's why I use a 1.5 K Ohm 1/2 Watt resistor for this jumper...

And if you want to just print out my Word document showing the procedure, here's the file: (I borrowed a couple of pictures from DTR and put labels on them, plus a picture of my own as well)

It's about a 4MB file, so it may take a minute to download:
http://www.sonic.net/~jayrob/FlexModP3 Setup.doc
 
Last edited:
LiquidLife

LiquidLife

0
Joined
Oct 9, 2010
Messages
66
Points
0
Burn through at 45ft in about 30 - 35 seconds (The large, line shaped melted depression) AixiZ 445 lens



IMG_20101116_135348.jpg
 
Last edited:
reginak

reginak

0
Joined
Sep 10, 2010
Messages
207
Points
28
So nice! Congrats for the 2W power. :)

My RL-2088, from DTR, also has 2W and burns like hell and with 405-G-1 lens I can easily burn through thick plastic.

Cheers!
 
J

Jaxz

0
Joined
Oct 20, 2010
Messages
244
Points
18
I looked forward to mine that jayrob specially designed for. gonna wait for a month before he completes mine. Hope I get the same burning power as you Liquid.
 
You must log in or register to reply here.





Top