- Joined
- Jan 7, 2007
- Messages
- 6,309
- Points
- 83
Enough about my picture.... Will S-ky do a trade-in
on my old "summer" laser????
What do you think?
HMike
on my old "summer" laser????
What do you think?
HMike
Last edited:
LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
517mW peak H532L-S300B skylaser review!
- Thread starter offroadfreak8582
- Start date
- Joined
- Mar 27, 2011
- Messages
- 14,125
- Points
- 113
I think at this point you're out of luck on a trade...
I also think that the divergence of .55 is suspiciously good.
@offroadfreak8582 - Take a page out of Mike's book... setup the laser outside if you don't have enough room indoors, and measure it over a greater distance. I suspect one of your numbers is off.
Btw, Mike, for a second there I thought you were wearing a cape :tinfoil: that is an interesting shirt.
I also think that the divergence of .55 is suspiciously good.
@offroadfreak8582 - Take a page out of Mike's book... setup the laser outside if you don't have enough room indoors, and measure it over a greater distance. I suspect one of your numbers is off.
Btw, Mike, for a second there I thought you were wearing a cape :tinfoil: that is an interesting shirt.
- Joined
- Jan 7, 2007
- Messages
- 6,309
- Points
- 83
I try to measure at ~ 25' and then about 250' across two neighbors lots!
This increases accuracy of the readings.
They don't care and "trust" me!!! With this damn laser?
HMike
This increases accuracy of the readings.
They don't care and "trust" me!!! With this damn laser?
HMike
- Joined
- Mar 27, 2011
- Messages
- 14,125
- Points
- 113
Wow... you really go the extra mile... so to speak.
Where I am, the only place to get 250' of open space would be at a park. Either that or on a road
Where I am, the only place to get 250' of open space would be at a park. Either that or on a road
- Joined
- Oct 14, 2011
- Messages
- 2,369
- Points
- 83
Wow... you really go the extra mile... so to speak.
Where I am, the only place to get 250' of open space would be at a park. Either that or on a road
Yeah i going to measure again somewere this week i believe i was of too. Wil let you guys know the updatet divergence.
And h_mike i dont really think they are going to give you a new laser but you can mail them to give it a shot! You never know!
Greetigs,,
- Joined
- Jan 7, 2007
- Messages
- 6,309
- Points
- 83
OffRoad ----
You might be right but we'll see!
Here is what I just sent S-ky---------
"Hello my friends ----
About 2 years ago, I got a green portable laser from you through “Betty” your worker.
It is a P532F-150B-Fa model -- s/n 0911301102
Since new, this laser outputs about 60 mW until it is warmed to body temperature when
it will output around 160 mW. At that time, I told Betty that this was very temperature sensitive and would only work in summer temperatures. She responded that I had received a “summer” laser not suited to cooler temperatures. I asked at that time for a trade for a “winter” laser and she never replied.
It appears that you have control of your processes and don’t advertise “seasonal” products.
I am still willing to trade this laser back to you for a more stable 532 nM laser.
I have reported this on LPF several times and I am waiting for a reply from you.
Thank You:
Mike (Hemlock Mike of LPF)"
I'll wait for a reply -------------------- right
HMike
You might be right but we'll see!
Here is what I just sent S-ky---------
"Hello my friends ----
About 2 years ago, I got a green portable laser from you through “Betty” your worker.
It is a P532F-150B-Fa model -- s/n 0911301102
Since new, this laser outputs about 60 mW until it is warmed to body temperature when
it will output around 160 mW. At that time, I told Betty that this was very temperature sensitive and would only work in summer temperatures. She responded that I had received a “summer” laser not suited to cooler temperatures. I asked at that time for a trade for a “winter” laser and she never replied.
It appears that you have control of your processes and don’t advertise “seasonal” products.
I am still willing to trade this laser back to you for a more stable 532 nM laser.
I have reported this on LPF several times and I am waiting for a reply from you.
Thank You:
Mike (Hemlock Mike of LPF)"
I'll wait for a reply -------------------- right
HMike
Last edited:
- Joined
- Oct 14, 2011
- Messages
- 2,369
- Points
- 83
Any news mike? Quite interested in what they say! Anyway updating beam divergence tommorow night people!
Greetings,,
EDIT: @sigurthr i viewed my video again and your right their still is some hopping but i believe it does stop somewhere! Guess its time to make a longer video
Last edited:
- Joined
- Mar 6, 2011
- Messages
- 279
- Points
- 28
Wow thats a great laser!
- Joined
- Oct 14, 2011
- Messages
- 2,369
- Points
- 83
Sorry guys got a long long day today so i wasn't able
To remeasure the divergence anyway it WILL be updated when i can
Greetings,,
To remeasure the divergence
anyway it WILL be updated when i can Greetings,,
- Joined
- Oct 14, 2011
- Messages
- 2,369
- Points
- 83
guys sorry for the delay! I was on a trip to Shanghai I updated the OP with a new divergence!
The beam diameter 1m from the aperature is 4.1mm and at 9M 14.2mm ( for as far as i can tell )
Which gives : 1.2624993292317612 mRad
Which seems like a better number in my eyes!
Also on the market in shanghai i lolled very often They sell quite a few lasers there and they got like the standard pen pointers and those flashlight model pointers. I spent an hour explaining them that a bigger laser does not need to be stronger then a smaller lasers...
-> They still didn't understand lol
greetings,,
I updated the OP with a new divergence! The beam diameter 1m from the aperature is 4.1mm and at 9M 14.2mm ( for as far as i can tell )
Which gives : 1.2624993292317612 mRad
Which seems like a better number in my eyes!
Also on the market in shanghai i lolled very often
They sell quite a few lasers there and they got like the standard pen pointers and those flashlight model pointers. I spent an hour explaining them that a bigger laser does not need to be stronger then a smaller lasers...-> They still didn't understand lol
greetings,,
Last edited:
