250mw Laser from Laserpointerpen.net - Page 2

DJNY · 03-01-2010, 03:38 PM

owned and dismissed

mrgoogfan · 03-01-2010, 07:03 PM

Quote:

Originally Posted by bootleg2go

Your claims of dropping your laser as you have described is about are ture as your 108 year age, both have been exaggerated by a factor of about 8x.
Those are very light scratches, not impact damage from a large fall onto concrete. In fact if you stood your laser on it's tailcap on concrete and tipped it over, the marks would be more than what you've shown. I know what these this looked like when dropped as poeple have sent them to me afterwords and they look much worse, even if the height onto concrete or asphalt is only 1-2 feet.

What about the other damaging impact marks from all the other drops onto asphalt and such?
A drop onto concrete would have caused major impact marks, not simple dimple/scratches, in fact the laser would have marks in at least 2-3 separate areas as from even a couple feet it would bounce a little and make secondary impact marks. It looks to me more like you removed the shutter aperture and dropped the shutter aperture cap on the sidewalk. It's light weight would allow just small marks like in your photograph.

The ONLY reason this thread even caught my eye is your blatant lies about the laser even surviving a drop onto concrete above a height of 2 feet, let along 8 feet and multiple times onto other hard surfaces; it's just not possible for them to sustain such a sharp G-force and survive.

ps. You are in violation of section 9 of the LPF terms of service regarding the use of vulgar language.
Your mommy should wash your mouth out with soap for the foul language you're filling our forum with.

Believe what you want, but your argument holds no value until you go drop your anodized aluminum laser 8ft onto polished concrete and compare the results.

Vertical impacts don't leave scratches. They leave dents dumbsh*t.

PS: lasers don't bounce more than 1cm.

ZRTMWA · 03-01-2010, 07:18 PM

Let's see if you can catch my message:

Woodofcville · 03-01-2010, 07:21 PM

Wow. This thread came down quickly... Was lemonwonder the one in charge of the beamcheap.com nonsense?

KiLLrB · 03-01-2010, 07:22 PM

Quote:

Originally Posted by mrgoogfan

from your first post: ...1x 3ft onto asphalt while running...

...Vertical impacts don't leave scratches. They leave dents dumbsh*t.
PS: lasers don't bounce more than 1cm.

Vertical impacts maybe not, running and dropping one most likely

BTW:

Trevor · 03-01-2010, 07:24 PM

Quote:

Originally Posted by mrgoogfan

Believe what you want, but your argument holds no value until you go drop your anodized aluminum laser 8ft onto polished concrete and compare the results.

Vertical impacts don't leave scratches. They leave dents dumbsh*t.

PS: lasers don't bounce more than 1cm.

You do realize that Jack, a.k.a. bootleg2go owns Optotronics, a distributor of Viasho products. If anyone here is going to know your laser in and out, it'd be Jack. And he is right in that you have zero credibility at this point - owing to both your behavior and "age."

Tell you what... you can make Jack eat his words by posting a video of you dropping this laser eight feet onto concrete and then it functioning.

-Trevor

DJNY · 03-01-2010, 07:25 PM

Quote:

Originally Posted by Woodofcville

Wow. This thread came down quickly... Was lemonwonder the one in charge of the beamcheap.com nonsense?

Jep, totally right!

KiLLrB · 03-01-2010, 07:27 PM

Quote:

Originally Posted by twhite828

...Tell you what... you can make me and Jack eat his words by posting a video of you dropping this laser eight feet onto concrete and then it functioning.

-Trevor

I gotta see this

Woodofcville · 03-01-2010, 07:31 PM

^lol

, the poor kid's gonna break his laser.

mrgoogfan · 03-01-2010, 10:16 PM

go to hell.

i dont have time for this.

Trevor · 03-01-2010, 10:29 PM

Quote:

Originally Posted by mrgoogfan

go to hell.

i dont have time for this.

Weren't you confident in this laser's ability to survive falls?

-Trevor

ninja_tux · 03-01-2010, 11:52 PM

RAWR this thread is getting a little bit crazy... I know everyone is still on edge because of the whole lemon/beamcheap incident, but I don't think that's reason to imply that new members could possibly be the same person as lemonwonder. And to suggest he should be banned based on purely circumstantial evidence? That just seems ridiculous.

That being said, mrgoogfan, you really need to calm down a bit and realize that some people here, like twhite828, are just trying to make sure that something like the "beamcheap" incident doesn't ever happen here again, and you seem to have been caught up in that.

IMO people just need to settle their kettles right now.

Jaseth · 03-02-2010, 03:09 AM

Hmm.. having a hard time deciding? Time for a pro and con list!
Here are the things I see that speak for and against this review being bogus:

For:
OP has previously lied and posted misinformation
laserpointerpen have previously spammed this forum
OP has several times criticised other companies
OP talks a lot about laserpointerpen
very limited visible damage to laser despite claims of large drops onto concrete and accelerated dropping
very unlikely that the inner parts of the laser would have survived such drops - like a car has to crush to protect the people inside, having a thick, hard case does not protect fragile inside of laser from a large drop
specs sound fabricated - (275mW green and 50mW IR), and OP cannot provide information on devise used for testing
hostile reaction from OP when questioned

Against:
mode of beam seems honestly stated
bad divergence of beam seems honestly stated
OP does speak of other things than this company, and seems to be here to learn too
OP is young and therefore unlikely to own laserpointerpen, although perhaps he has received free units/money/other for lying about their products

Please let me know if I missed any.. and then I guess OP can try to prove his claims and argue his points (in a polite manner), and we can decide what to do.

Seb

Cooler7 · 03-02-2010, 04:03 AM

...I recieved my laser today its from BeamCheap.com and I'm making a review. It should be done by this saturday

(White Flag)

mrgoogfan · 03-02-2010, 06:22 PM

wow. i try to write a review and you people act like children.

Meatball · 03-02-2010, 06:49 PM

Hey mrgoogfan, did you say that your laser had mode hopping problems earlier on? Has it always been that way? Or was it something that developed over time?

mrgoogfan · 03-02-2010, 07:06 PM

Quote:

Originally Posted by Meatball

Hey mrgoogfan, did you say that your laser had mode hopping problems earlier on? Has it always been that way? Or was it something that developed over time?

Nah, they started to appear after a couple drops. The tem modes are so high though, that the beam looks essentially guassian. They are really only noticeable when the beam is put through a lens and made 3 feet wide.

ZRTMWA · 03-02-2010, 07:21 PM

Quote:

Originally Posted by ZRTMWA

What meter do you have or is the power what Toplaser told you? Thanks.

Post #3

Tech_Junkie · 03-02-2010, 07:41 PM

Some of you guys need to realize we have 0 tolerance for lies, and deceit on this forum. We self moderate for the most part, so everyone has the right to call anyone else out when we think they are lying. Sorry if some of it may sound harsh, but we wont put up with it. You should be happy we do this, because it insures you get proper information in posts, and you're not scammed if you buy something from and individual.

RA_pierce · 03-02-2010, 11:02 PM

Quote:

Originally Posted by mrgoogfan

go to hell.

Quote:

Originally Posted by mrgoogfan

Vertical impacts don't leave scratches. They leave dents dumbsh*t.

Quote:

Originally Posted by mrgoogfan

So, to you i say. Fuck you, and quit derailing this thread.

Quote:

Originally Posted by mrgoogfan

Well, i try to have a nice discussion about lasers and you people turn it into a clusterfuck.

Quote:

Originally Posted by mrgoogfan

wow. i try to write a review and you people act like children.

Wait a minute...

mrgoogfan, please answer ZRTMWA's question in post #3.

If you want to get these guys off your back, you will provide factual information only (not exaggerations), refrain from spilling profanities all over this forum, and take a chill pill.

mrgoogfan · 03-02-2010, 11:34 PM

Quote:

Originally Posted by ZRTMWA

What meter do you have or is the power what Toplaser told you? Thanks.

this one.
Coherent Molectron Power Max 5200 Laser Power Meter - eBay (item 350239419890 end time Mar-10-10 14:00:39 PST)

KiLLrB · 03-02-2010, 11:57 PM

Quote:

Originally Posted by mrgoogfan

this one.
Coherent Molectron Power Max 5200 Laser Power Meter - eBay (item 350239419890 end time Mar-10-10 14:00:39 PST)

Pics or it didnt happen.

Don't Laze Me Bro · 03-03-2010, 12:02 AM

Quote:

Originally Posted by KiLLrB

Pics or it didnt happen.

Agreed

Jaseth · 03-03-2010, 12:05 AM

Quote:

Originally Posted by Jaseth

What LPM did you measure the power with? How stable is the output? Have you got a graph?

Quote:

Originally Posted by mrgoogfan

Idk, i had a friend measure it for me at where they work. (fiber optic company)

it is very stable, takes about 2 sec to warm up to full power, as is to be expected.

and now

Quote:

Originally Posted by mrgoogfan

this one.
Coherent Molectron Power Max 5200 Laser Power Meter - eBay (item 350239419890 end time Mar-10-10 14:00:39 PST)

You are nothing but a filthy liar.

Seb

KiLLrB · 03-03-2010, 12:11 AM

Quote:

Originally Posted by Jaseth

and now

You are nothing but a filthy liar.

Seb

Ban thread anyone? I seriously think its time.

*EDIT* Thread started

03-01-2010, 03:38 PM	#26
DJNY Class 3B Laser Join Date: Nov 2009 Location: Austria Posts: 4,972 Rep Power: 239	Re: 250mw Laser from Laserpointerpen.net owned and dismissed

03-01-2010, 07:18 PM	#28
ZRTMWA Class 3R Laser Join Date: Jun 2009 Location: Maryland Posts: 1,326 Rep Power: 21	Re: 250mw Laser from Laserpointerpen.net Let's see if you can catch my message:

03-01-2010, 07:21 PM	#29
Woodofcville Class 3R Laser Join Date: Oct 2009 Location: Tulsa, Oklahoma Posts: 1,193 Rep Power: 32	Re: 250mw Laser from Laserpointerpen.net Wow. This thread came down quickly... Was lemonwonder the one in charge of the beamcheap.com nonsense? __________________ _~Cale -~10mW Focusable O-Like (405nm) -~60mW CNI Clone (405nm) -~1W Spyder III, Arctic Series (445nm) -~5mW Radioshack Pointer (532nm) -~55mW Viper (532nm) -~200mW Skylasers Portable (532nm) -~5mW Atlasnova (635nm) -~200mW New Style Dilda (650nm) -~5mW DX pointer (650nm)

03-01-2010, 07:31 PM	#34
Woodofcville Class 3R Laser Join Date: Oct 2009 Location: Tulsa, Oklahoma Posts: 1,193 Rep Power: 32	Re: 250mw Laser from Laserpointerpen.net ^lol , the poor kid's gonna break his laser. __________________ _~Cale -~10mW Focusable O-Like (405nm) -~60mW CNI Clone (405nm) -~1W Spyder III, Arctic Series (445nm) -~5mW Radioshack Pointer (532nm) -~55mW Viper (532nm) -~200mW Skylasers Portable (532nm) -~5mW Atlasnova (635nm) -~200mW New Style Dilda (650nm) -~5mW DX pointer (650nm)

03-01-2010, 10:16 PM	#35
mrgoogfan Banned Join Date: Feb 2010 Location: Behind you- With a lead Pipe Posts: 100 Rep Power: 0	Re: 250mw Laser from Laserpointerpen.net go to hell. i dont have time for this.

03-01-2010, 11:52 PM	#37
ninja_tux Class 1M Laser Join Date: Dec 2007 Location: Chicago Area Posts: 136 Rep Power: 13	Re: 250mw Laser from Laserpointerpen.net RAWR this thread is getting a little bit crazy... I know everyone is still on edge because of the whole lemon/beamcheap incident, but I don't think that's reason to imply that new members could possibly be the same person as lemonwonder. And to suggest he should be banned based on purely circumstantial evidence? That just seems ridiculous. That being said, mrgoogfan, you really need to calm down a bit and realize that some people here, like twhite828, are just trying to make sure that something like the "beamcheap" incident doesn't ever happen here again, and you seem to have been caught up in that. IMO people just need to settle their kettles right now. __________________ Random <5mW green and red ~19mW 405nm O-Like adjustable ~72mW 532nm O-Like pointer ~143mW 405nm O-like adjustable ~171mW Jayrob Ultrafire C3 kit w/ Dx "200mW" module Cheap anti-green/violet focalprice goggles----Review Here Scientech 365 + 360001 Calorimeter LensPen Micro for laser lens cleaning Interested in Linux but have questions? PM me! You should Get Dropbox, it's awesome for any sort of file uploading/syncing!

03-02-2010, 03:09 AM	#38
Jaseth Class 3R Laser Join Date: Jan 2009 Posts: 1,642 Rep Power: 186	Re: 250mw Laser from Laserpointerpen.net Hmm.. having a hard time deciding? Time for a pro and con list! Here are the things I see that speak for and against this review being bogus: For: OP has previously lied and posted misinformation laserpointerpen have previously spammed this forum OP has several times criticised other companies OP talks a lot about laserpointerpen very limited visible damage to laser despite claims of large drops onto concrete and accelerated dropping very unlikely that the inner parts of the laser would have survived such drops - like a car has to crush to protect the people inside, having a thick, hard case does not protect fragile inside of laser from a large drop specs sound fabricated - (275mW green and 50mW IR), and OP cannot provide information on devise used for testing hostile reaction from OP when questioned Against: mode of beam seems honestly stated bad divergence of beam seems honestly stated OP does speak of other things than this company, and seems to be here to learn too OP is young and therefore unlikely to own laserpointerpen, although perhaps he has received free units/money/other for lying about their products Please let me know if I missed any.. and then I guess OP can try to prove his claims and argue his points (in a polite manner), and we can decide what to do. Seb __________________ Many 405nm, 445nm, 473nm, 532nm and 655nm 4.2W RGB projector with DT-25 and FB3 Kenometer Pro Don't be an idiot - protect yourself with proper goggles and never point a laser at living things or vehicles, especially aircraft.

03-02-2010, 04:03 AM	#39
Cooler7 Class 2 Laser Join Date: Feb 2010 Location: California with Bob Marley (yes he is here too) Posts: 330 Rep Power: 10	Re: 250mw Laser from Laserpointerpen.net ...I recieved my laser today its from BeamCheap.com and I'm making a review. It should be done by this saturday (White Flag) __________________ 200mW Red Laser Water-Proof ( Review Posted ) http://laserpointerforums.com/f52/20...tml#post667493 100mW Green Laser

03-02-2010, 06:22 PM	#40
mrgoogfan Banned Join Date: Feb 2010 Location: Behind you- With a lead Pipe Posts: 100 Rep Power: 0	Re: 250mw Laser from Laserpointerpen.net wow. i try to write a review and you people act like children.

03-02-2010, 06:49 PM	#41
Meatball Class 3B Laser Join Date: Feb 2008 Location: Lincoln, NE Posts: 2,809 Rep Power: 173	Re: 250mw Laser from Laserpointerpen.net Hey mrgoogfan, did you say that your laser had mode hopping problems earlier on? Has it always been that way? Or was it something that developed over time?

03-02-2010, 07:41 PM	#44
Tech_Junkie Banned Join Date: Jan 2009 Location: In A State of Shock. Posts: 11,938 Rep Power: 0	Re: 250mw Laser from Laserpointerpen.net Some of you guys need to realize we have 0 tolerance for lies, and deceit on this forum. We self moderate for the most part, so everyone has the right to call anyone else out when we think they are lying. Sorry if some of it may sound harsh, but we wont put up with it. You should be happy we do this, because it insures you get proper information in posts, and you're not scammed if you buy something from and individual. Last edited by Tech_Junkie; 03-02-2010 at 07:46 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode