Laser pointer discussion. Read/write reviews of laser pointers and laser pointer companies. Learn about all types of laser pointers and lasers





Welcome to Laser Pointer Forums! If you are looking for a laser pointer or want to compare different laser pointer companies, you may want to check out the LPF Laser Pointer Company Database. The link will open in a new window for your convenience.








Green Laser Pointers by Category Blue Laser Pointers by Category Red Laser Pointers by Category
Yellow Laser Pointers by Category Violet Laser Pointers by Category Orange Laser Pointers by Category
Top Laser Pointers by Power - 1 Watt+ Top Laser Pointers by Power - 500mW+ Top Laser Pointers by Power - 250mW+
Laser Pointer Database High Power Laser Pointers Laser Pointer Diodes
Laser Technology Laser Pointer Parts Lasers by Wavelength
Top 10 Laser Pointer Companies Laser Pointer Company Database Visible Beam Laser Pointers


One laser store meets all your needs

























Go Back   Laser Pointer Forums - Discuss Laser Pointers > Lasers > Tutorials, Help & Repairs



LPF List of Laser Pointer Companies (link opens new window)



Reply
 
LinkBack Thread Tools Display Modes
Old 09-05-2015, 06:29 PM #1
gozert's Avatar
Class 3R Laser
 
Join Date: Nov 2014
Location: Netherlands
Posts: 1,092
Rep Power: 277
gozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond repute
gozert gozert is offline
Class 3R Laser
gozert's Avatar
 
Join Date: Nov 2014
Location: Netherlands
Posts: 1,092
Rep Power: 277
gozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond repute
Default Resoldering wires on driver

I recently cut the wires on one of my drivers too short, and decided to desolder them. The desoldering worked, but now there's a bunch of solder left inside the holes where the wires go. Does anyone have advice on how to remove the solder and solder in new wires?


gozert is offline   Reply With Quote







LPF List of Laser Pointer Companies (link opens new window)







Old 09-05-2015, 07:20 PM #2
Cyparagon's Avatar
Class 4 Laser
 
Join Date: Sep 2007
Location: Wisconsin
Posts: 9,142
Rep Power: 9321
Cyparagon has a reputation beyond reputeCyparagon has a reputation beyond reputeCyparagon has a reputation beyond reputeCyparagon has a reputation beyond reputeCyparagon has a reputation beyond reputeCyparagon has a reputation beyond reputeCyparagon has a reputation beyond reputeCyparagon has a reputation beyond reputeCyparagon has a reputation beyond reputeCyparagon has a reputation beyond reputeCyparagon has a reputation beyond repute
Cyparagon Cyparagon is online now
Class 4 Laser
Cyparagon's Avatar
 
Join Date: Sep 2007
Location: Wisconsin
Posts: 9,142
Rep Power: 9321
Cyparagon has a reputation beyond reputeCyparagon has a reputation beyond reputeCyparagon has a reputation beyond reputeCyparagon has a reputation beyond reputeCyparagon has a reputation beyond reputeCyparagon has a reputation beyond reputeCyparagon has a reputation beyond reputeCyparagon has a reputation beyond reputeCyparagon has a reputation beyond reputeCyparagon has a reputation beyond reputeCyparagon has a reputation beyond repute
Default Re: Resoldering wires on driver

You don't need to remove the solder to solder new wires, although it does make it a bit easier. I melt the solder and blow quickly and forcefully into the hole. You can also use desoldering wick if you have some.
__________________
A problem well stated is a problem half solved.
Cyparagon is online now   Reply With Quote
Old 09-05-2015, 07:53 PM #3
gozert's Avatar
Class 3R Laser
 
Join Date: Nov 2014
Location: Netherlands
Posts: 1,092
Rep Power: 277
gozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond repute
gozert gozert is offline
Class 3R Laser
gozert's Avatar
 
Join Date: Nov 2014
Location: Netherlands
Posts: 1,092
Rep Power: 277
gozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond repute
Default Re: Resoldering wires on driver

Quote:
Originally Posted by Cyparagon View Post
You don't need to remove the solder to solder new wires, although it does make it a bit easier. I melt the solder and blow quickly and forcefully into the hole. You can also use desoldering wick if you have some.
Alright, thanks for the advice. I don't have too many soldering supplies at home, but my dad has quite some stuff on his work. I'm pretty sure I can work this out.
gozert is offline   Reply With Quote
Old 09-05-2015, 09:35 PM #4
Lifetime17's Avatar
Class 3B Laser
 
Join Date: Dec 2014
Location: N.J. USA ⚡️⚡️
Posts: 3,043
Rep Power: 34620
Lifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond repute
Lifetime17 Lifetime17 is offline
Class 3B Laser
Lifetime17's Avatar
 
Join Date: Dec 2014
Location: N.J. USA ⚡️⚡️
Posts: 3,043
Rep Power: 34620
Lifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond reputeLifetime17 has a reputation beyond repute
Default Re: Resoldering wires on driver

Hi G,
yes get the solder hot and then use a can of air you buy for keyboards but blow the soldier away from the other circuits . But if you have a fine point iron you can just attach the leads without using the whole. contact will be fine take you time..

Rich
Lifetime17 is offline   Reply With Quote
Old 09-07-2015, 12:54 AM #5
TaterMay's Avatar
Class 2 Laser
 
Join Date: May 2015
Location: Birmingham, AL
Posts: 350
Rep Power: 93
TaterMay has a reputation beyond reputeTaterMay has a reputation beyond reputeTaterMay has a reputation beyond reputeTaterMay has a reputation beyond reputeTaterMay has a reputation beyond reputeTaterMay has a reputation beyond reputeTaterMay has a reputation beyond reputeTaterMay has a reputation beyond reputeTaterMay has a reputation beyond reputeTaterMay has a reputation beyond reputeTaterMay has a reputation beyond repute
TaterMay TaterMay is offline
Class 2 Laser
TaterMay's Avatar
 
Join Date: May 2015
Location: Birmingham, AL
Posts: 350
Rep Power: 93
TaterMay has a reputation beyond reputeTaterMay has a reputation beyond reputeTaterMay has a reputation beyond reputeTaterMay has a reputation beyond reputeTaterMay has a reputation beyond reputeTaterMay has a reputation beyond reputeTaterMay has a reputation beyond reputeTaterMay has a reputation beyond reputeTaterMay has a reputation beyond reputeTaterMay has a reputation beyond reputeTaterMay has a reputation beyond repute
Default Re: Resoldering wires on driver

I recently did something similar, and I simply soldered the wire onto it like it was a normal contact pad instead of going through-hole. If you are using small wire, you might be able to just heat the solder up and stick the wire through the molten solder. I was using 22 gauge, so it was too tight a fit to do that. I'm running 4.5A through it, and it's been doing just fine.
__________________
My Builds
5W+ ~470nm NUBM07E MX900 Build
5 x 7W+ 450nm MX900 Builds
3,343mW 445nm "Zombie Killer" Build
1.5W NDG7475 Ehgemus Host
1.3W+ NUGM01T
235mW PLP520-B1

LPMs
Laserbee 3.7W USB
Ophir DG-HH(10W)
TaterMay is offline   Reply With Quote
Old 09-08-2015, 01:07 AM #6
Benm's Avatar
Class 4 Laser
 
Join Date: Aug 2007
Location: Netherlands
Posts: 7,439
Rep Power: 18210
Benm has a reputation beyond reputeBenm has a reputation beyond reputeBenm has a reputation beyond reputeBenm has a reputation beyond reputeBenm has a reputation beyond reputeBenm has a reputation beyond reputeBenm has a reputation beyond reputeBenm has a reputation beyond reputeBenm has a reputation beyond reputeBenm has a reputation beyond reputeBenm has a reputation beyond repute
Benm Benm is online now
Class 4 Laser
Benm's Avatar
 
Join Date: Aug 2007
Location: Netherlands
Posts: 7,439
Rep Power: 18210
Benm has a reputation beyond reputeBenm has a reputation beyond reputeBenm has a reputation beyond reputeBenm has a reputation beyond reputeBenm has a reputation beyond reputeBenm has a reputation beyond reputeBenm has a reputation beyond reputeBenm has a reputation beyond reputeBenm has a reputation beyond reputeBenm has a reputation beyond reputeBenm has a reputation beyond repute
Default Re: Resoldering wires on driver

^^ that actually works much easier compared to getting the solder from the pcb holes, and is perfectly doable if you can solder the wires on by one. Just heat the pads and flow a bit of fluxed solder onto them and stick the tinned wire end through, should be fine.

If you need to insert someting like a connector or dip packange and need all the holes clear i find it easiest to just flow solder onto them and give it a controlled whack so it all flies out. Probably not what they teach in electronics school, but it works to clear a dozen or so of problematic pads in a few attempts without any special equipment. Obviously a desolderer with suction would be far better if you have one
Benm is online now   Reply With Quote
Old 09-08-2015, 05:20 AM #7
grainde's Avatar
Class 3B Laser
 
Join Date: Jan 2012
Location: Alsace
Posts: 2,697
Rep Power: 31615
grainde has a reputation beyond reputegrainde has a reputation beyond reputegrainde has a reputation beyond reputegrainde has a reputation beyond reputegrainde has a reputation beyond reputegrainde has a reputation beyond reputegrainde has a reputation beyond reputegrainde has a reputation beyond reputegrainde has a reputation beyond reputegrainde has a reputation beyond reputegrainde has a reputation beyond repute
grainde grainde is online now
Class 3B Laser
grainde's Avatar
 
Join Date: Jan 2012
Location: Alsace
Posts: 2,697
Rep Power: 31615
grainde has a reputation beyond reputegrainde has a reputation beyond reputegrainde has a reputation beyond reputegrainde has a reputation beyond reputegrainde has a reputation beyond reputegrainde has a reputation beyond reputegrainde has a reputation beyond reputegrainde has a reputation beyond reputegrainde has a reputation beyond reputegrainde has a reputation beyond reputegrainde has a reputation beyond repute
Default Re: Resoldering wires on driver

Sometimes its not easy to remove with a soldering iron. Ive done this a few times now... If your soldering iron has a very fine, pointed tip, press it into the hole. Start by touching the solder first and when you see it melt push the tip into the hole. Pull it out quickly and you will have a deep dent in the surface of the solder. Take a 1.2 mm drill bit and using your fingers spin it in the hole. Solder is quite soft and it takes a min, or so to (hand) drill through. Dont push hard or you can damage the contact on the otherside when you pass through the hole. Let the drill do the work with gentle pressure. Very easy, reliable and clean method that works.
__________________
New to lasers & want some info on how to build a laser? Look here: Build a laser

Need info on goggles? Look here: Get safety goggles now!

FS Custom Sinner Host builds available now!


Here is my old Kryton Groove FS thread!

100mW 405 PHR
700mW 405

2W 445 C6--link--
+2.3W 445 --link--
+2.5W 445 --link--

190mW 450 --link--
15mW 510nm
5mW 532 --link--
25mW 532 --link--

520mW 638 --link--
1W 638

250mW 650
250mW 780

3000 Lm C8 MTG2 @ 6 A!
Poppas mod 3A --link--
Sipik 98 Cu pill/star mod --link--
grainde is online now   Reply With Quote
Old 09-08-2015, 07:59 AM #8
Eudaimonium's Avatar
Class 4 Laser
 
Join Date: Feb 2008
Location: Pitomača, Croatia
Posts: 6,295
Rep Power: 427
Eudaimonium has a reputation beyond reputeEudaimonium has a reputation beyond reputeEudaimonium has a reputation beyond reputeEudaimonium has a reputation beyond reputeEudaimonium has a reputation beyond reputeEudaimonium has a reputation beyond reputeEudaimonium has a reputation beyond reputeEudaimonium has a reputation beyond reputeEudaimonium has a reputation beyond reputeEudaimonium has a reputation beyond reputeEudaimonium has a reputation beyond repute
Send a message via Skype™ to Eudaimonium
Eudaimonium Eudaimonium is offline
Class 4 Laser
Eudaimonium's Avatar
 
Join Date: Feb 2008
Location: Pitomača, Croatia
Posts: 6,295
Rep Power: 427
Eudaimonium has a reputation beyond reputeEudaimonium has a reputation beyond reputeEudaimonium has a reputation beyond reputeEudaimonium has a reputation beyond reputeEudaimonium has a reputation beyond reputeEudaimonium has a reputation beyond reputeEudaimonium has a reputation beyond reputeEudaimonium has a reputation beyond reputeEudaimonium has a reputation beyond reputeEudaimonium has a reputation beyond reputeEudaimonium has a reputation beyond repute
Send a message via Skype™ to Eudaimonium
Default Re: Resoldering wires on driver

Quote:
Originally Posted by grainde View Post
Sometimes its not easy to remove with a soldering iron. Ive done this a few times now... If your soldering iron has a very fine, pointed tip, press it into the hole. Start by touching the solder first and when you see it melt push the tip into the hole. Pull it out quickly and you will have a deep dent in the surface of the solder. Take a 1.2 mm drill bit and using your fingers spin it in the hole. Solder is quite soft and it takes a min, or so to (hand) drill through. Dont push hard or you can damage the contact on the otherside when you pass through the hole. Let the drill do the work with gentle pressure. Very easy, reliable and clean method that works.
Sounds like bit of an overkill to me.

I mean, just melt the solder with the iron, and just push the wire through the melted solder. Then, with wire through, grab it in helping hands or whatever, and just re-do the solder joint with fresh solder and flux.

No need to "remove" it really.
__________________
Accepting and
^Click to enter^

The "Where to get laser components" big compilation thread!

Are you new and need help? Instead of starting new threads, shoot me a Personal Message! I'll answer all the beginner's and advanced questions you might have!

Eudaimonium is offline   Reply With Quote
Old 09-08-2015, 08:35 AM #9
grainde's Avatar
Class 3B Laser
 
Join Date: Jan 2012
Location: Alsace
Posts: 2,697
Rep Power: 31615
grainde has a reputation beyond reputegrainde has a reputation beyond reputegrainde has a reputation beyond reputegrainde has a reputation beyond reputegrainde has a reputation beyond reputegrainde has a reputation beyond reputegrainde has a reputation beyond reputegrainde has a reputation beyond reputegrainde has a reputation beyond reputegrainde has a reputation beyond reputegrainde has a reputation beyond repute
grainde grainde is online now
Class 3B Laser
grainde's Avatar
 
Join Date: Jan 2012
Location: Alsace
Posts: 2,697
Rep Power: 31615
grainde has a reputation beyond reputegrainde has a reputation beyond reputegrainde has a reputation beyond reputegrainde has a reputation beyond reputegrainde has a reputation beyond reputegrainde has a reputation beyond reputegrainde has a reputation beyond reputegrainde has a reputation beyond reputegrainde has a reputation beyond reputegrainde has a reputation beyond reputegrainde has a reputation beyond repute
Default Re: Resoldering wires on driver

^^^ Yup Ive tried that too, but often the wire beds, frays gets stuck etc. I just found this to be the easiest method and it only takes a couple of mins. Anyway just putting it out there in case he wants to try it.
__________________
New to lasers & want some info on how to build a laser? Look here: Build a laser

Need info on goggles? Look here: Get safety goggles now!

FS Custom Sinner Host builds available now!


Here is my old Kryton Groove FS thread!

100mW 405 PHR
700mW 405

2W 445 C6--link--
+2.3W 445 --link--
+2.5W 445 --link--

190mW 450 --link--
15mW 510nm
5mW 532 --link--
25mW 532 --link--

520mW 638 --link--
1W 638

250mW 650
250mW 780

3000 Lm C8 MTG2 @ 6 A!
Poppas mod 3A --link--
Sipik 98 Cu pill/star mod --link--
grainde is online now   Reply With Quote
Old 09-17-2015, 02:01 AM #10
Class 1M Laser
 
Join Date: Feb 2009
Posts: 199
Rep Power: 53
Illuminum3415 has a reputation beyond reputeIlluminum3415 has a reputation beyond reputeIlluminum3415 has a reputation beyond reputeIlluminum3415 has a reputation beyond reputeIlluminum3415 has a reputation beyond reputeIlluminum3415 has a reputation beyond reputeIlluminum3415 has a reputation beyond reputeIlluminum3415 has a reputation beyond reputeIlluminum3415 has a reputation beyond reputeIlluminum3415 has a reputation beyond reputeIlluminum3415 has a reputation beyond repute
Illuminum3415 Illuminum3415 is offline
Class 1M Laser
 
Join Date: Feb 2009
Posts: 199
Rep Power: 53
Illuminum3415 has a reputation beyond reputeIlluminum3415 has a reputation beyond reputeIlluminum3415 has a reputation beyond reputeIlluminum3415 has a reputation beyond reputeIlluminum3415 has a reputation beyond reputeIlluminum3415 has a reputation beyond reputeIlluminum3415 has a reputation beyond reputeIlluminum3415 has a reputation beyond reputeIlluminum3415 has a reputation beyond reputeIlluminum3415 has a reputation beyond reputeIlluminum3415 has a reputation beyond repute
Default Re: Resoldering wires on driver

Cyparagon, I find the force fitting method only works well for solid core hookups, and aluminum at that.
However, that method works to desolder the hole if its stranded copper, just requires you to strip alot of insulation. One benefit is that you have solder wick that, depending on your wire options, can fit in any hole.


I use one of two methods

1: If there is room to maneuver, then put a small dab of flux paste [not alot, just enough to break the tension] onto the hole and then with the wick placed over the filled hole, set your solder tip on the wick until the solder is "wicked" off.

2: Years back I bought a couple no name SS dental picks. Solder doesn't stick to them, and the tips are fairly sharp. For really cramped repairs, I would heat the hole from one end and insert the pick from the other. remove the heat and wiggle the pick till the hole is enlarged. Usually repeating with thicker picks does the trick.

If I absolutely need to have the hole fast, I typically drill it out. You'll need a drill press and something small, smaller than a 1/16, something like a #54 or #56 will do you fine. solder is very soft, won't need too much presure. Just know if you drill off axis you might cause irreversible damage to plate-thru contacts. Good news is that's easy to fix, just apply solder to both ends of the wire when you stuff it through. When in doubt, apply a little flux

Let us know how it turns out

Last edited by Illuminum3415; 09-17-2015 at 02:06 AM.
Illuminum3415 is offline   Reply With Quote
Old 09-17-2015, 12:37 PM #11
BowtieGuy's Avatar
Class 3B Laser
 
Join Date: Oct 2012
Location: S.E. Michigan U.S.A.
Posts: 3,277
Rep Power: 47232
BowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond repute
BowtieGuy BowtieGuy is offline
Class 3B Laser
BowtieGuy's Avatar
 
Join Date: Oct 2012
Location: S.E. Michigan U.S.A.
Posts: 3,277
Rep Power: 47232
BowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond reputeBowtieGuy has a reputation beyond repute
Default Re: Resoldering wires on driver

I also use/like the drill method, I always hand drill mine by just spinning the drill between your fingers; as stated previously, the solder is very soft, and cuts quite easily.
If you have trouble with this, I sometimes will use a pin vise (see pic below) to hold the drill, and give a little more control.


__________________
405nm Solarstorm S3 (1.09W) • W/L Sonar (264mW)
405nm Custom JETLASERS Ti-B (1.08W)

445nm Build "Ole Blue" (2.8W+)
445nm 1.3W JETLASERS PL-E (1.5W)

450nm Custom JETLASERS Ti-B (327mW)
462nm Solarforce T2 (2.1W)-link-
465nm 1.4mW JETLASERS Mini (1.64mW)
467nm "Maraxus" (2.3W)
470nm "Silver Bullet"
515nm 30mW Ehgemus titanium (84mW)
520nm S/S build (250mW) •50mW JETLASERS Ti-B (73mW)
520nm Ehgemus Custom (1.45W) •Coleman Jr. (234mW)
-link-
532nm 1.5W Goldenstar lab (3W)
532nm 500mW JETLASERS PL-E (754mW)
532nm 100mW JETLASERS Ti-B (161mW)
532nm 5mW "Eclipse" mints tin (54mW)

589nm 80mW CNI PGL-III-C (154mW)
589nm 50mW Dragonlasers Spartan (124mW)

594nm L/G Rigel-6 "LPF Anniv. Ed." (6.7mW)
635nm 20mW JETLASERS Ti (30mW)
638nm Custom JETLASERS Ti-B (232mW)-link-
638nm "Coleman Special" (260mW)
638nm Build in sinner's "MS-SSW Stubby" (1.25W)
650nm W/L E2 (89mW) • Laserbtb PL-650 1000 (1W)
660nm S/S Build (383mW)
674nm 501B/Melles Griot u/k Build 20mW

LK-3D Projector

5W Ophir/dmm LPM, nospin 5W LPM
BowtieGuy is offline   Reply With Quote
Old 09-17-2015, 01:24 PM #12
gozert's Avatar
Class 3R Laser
 
Join Date: Nov 2014
Location: Netherlands
Posts: 1,092
Rep Power: 277
gozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond repute
gozert gozert is offline
Class 3R Laser
gozert's Avatar
 
Join Date: Nov 2014
Location: Netherlands
Posts: 1,092
Rep Power: 277
gozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond reputegozert has a reputation beyond repute
Default Re: Resoldering wires on driver

Thanks for the advice guys. I went with heating it up with a soldering iron and managed to do it after a couple tries.
gozert is offline   Reply With Quote
Reply





Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On











Loading








Green Laser Pointers by Category Blue Laser Pointers by Category Red Laser Pointers by Category
Yellow Laser Pointers by Category Violet Laser Pointers by Category Orange Laser Pointers by Category
Top Laser Pointers by Power - 1 Watt+ Top Laser Pointers by Power - 500mW+ Top Laser Pointers by Power - 250mW+
Laser Pointer Database High Power Laser Pointers Laser Pointer Diodes






Privacy Policy | Advertising Disclaimer | Terms of Use


 


All times are GMT. The time now is 06:46 AM.


Powered by: vBulletin
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO
Privacy Policy | Advertising Disclaimer | Terms of Use
Copyright (C) 2017 Laser Pointer Forums, LLC