Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Problems with C6 JAD kit + dtr diode

Joined
Mar 29, 2012
Messages
114
Points
0
thats true, BUT he is using 3 element glass lens, which clips the beam and it is near circular (not perfect) dot and gives thin beam. So i think he might need to focus better. distance could also be the fact here (maybe he is shinning far away, in which case beam will get bigger, then near by) :beer:

gif
I think that it doesn't have to do with my focusing, I have it so that it converges ~20 feet away, which is pretty good, but when it comes out of the aperture/lens, it's already about 5mm thick.

It's probably that I'm comparing it to my green laser, which has a very very thin beam.
 





Joined
Mar 29, 2012
Messages
114
Points
0
They are hand tightened, should unscrew fine

Yeah I got it off. Thanks so much! It works amazingly well. Gets hot surprisingly fast, but I guess that's to be expected at 1800mA.

I wanna get a LPM next to see what it's actually outputting. When I have it converging at a point, it lights match literally instantly, but it doesn't seem quite as powerful as some videos I've seen before. (Like ones where it can cut through a match). Not to say I'm disappointed, I love this laser and think its the coolest thing ever, but I'm just curious.

I remember reading the ultrafire batteries are not very good- should I switch to AW batteries?
 
Last edited:
Joined
Mar 29, 2012
Messages
114
Points
0
If you want to be on the bleeding edge, sure, why not.

Glenn
The reason I say this is because my batteries are operating at 880mA each. Meaning 1760 total, probably quite a bit less. But the driver draws 1800mA. Shouldn't I then use batteries which total to > 1800mA?

I'm sorry, this type of electronics is not my strongest subject, but I'm trying to learn.
 
Last edited:
Joined
Nov 19, 2011
Messages
294
Points
0
As i understand it, and I could be wrong because I'm still a noob myself, is that the mA rating on the batteries has to do with their capacity. Therefore, it is not necessary to match them to the current draw of your device. The two are not directly related AFAIK.

Anybody else?

Glenn

The reason I say this is because my batteries are operating at 880mA each. Meaning 1660 total, probably a bit less. But the driver draws 1800mA. Shouldn't I then use batteries which total to > 1800mA?

I'm sorry, this type of electronics is not my strongest subject, but I'm trying to learn.
 
Joined
Mar 29, 2012
Messages
114
Points
0
As i understand it, and I could be wrong because I'm still a noob myself, is that the mA rating on the batteries has to do with their capacity. Therefore, it is not necessary to match them to the current draw of your device. The two are not directly related AFAIK.

Anybody else?

Glenn
Ahh. That makes more sense. I remember reading that devices tend to take the current they need, but the voltage that's given. Something to that extent.

Anyways, does anyone have any sort of benchmark at which my laser should be hitting? Like, I can burn through electrical tape when focused within a second. But I have been unable to light a match from 10 feet away, well focused.

I'm really sorry that I keep asking stupid questions like this, it probably sounds like I'm not impressed, or ungrateful with my laser, which is completely not the case. After only having a 100mW green for the past 4 or so years, this is an amazing step forward, but now I've become addicted, and want as much power as I can get my hands on.

EDIT: Also, building a laser, despite this barely being a build, is immensely satisfying.
 
Last edited:
Joined
Feb 12, 2012
Messages
237
Points
0
It is possible to correct the beam into a dot but it would require significant external optics next since the bats are in series here voltage increases not there capacity. Using the aixiz 3 element is not recommended for a 1.8 amp build because most of that 30% energy is being turned into heat but some gets reflected back into diode shortening its life and the final note that c6 heat sink is horrible for dealing with the 5-7 joules being pumped into it every second so the duty cycle will have to quite short the heat sink quite simply does not have the mass to deal with all that excess heat.
 
Joined
Jan 14, 2012
Messages
423
Points
0
Batteries are rated in mAH meaning your 880maH cells can supply 880mA for 1h....
miiamps x hour

Problem with all the ***fire cells are mny many of them are repackaged from salvaged cells and passed off as the real thing. They're really hit and miss. With AW you know exactly what you get
 
Joined
Mar 29, 2012
Messages
114
Points
0
Batteries are rated in mAH meaning your 880maH cells can supply 880mA for 1h....
miiamps x hour

Ah. Now that makes sense.

Problem with all the ***fire cells are mny many of them are repackaged from salvaged cells and passed off as the real thing. They're really hit and miss. With AW you know exactly what you get

Okay I see. I don't think new batteries will make a massive difference, so I'll wait a bit before get some.




http://laserpointerforums.com/f65/estimating-power-output-blue-laser-72210.html

I have three DTR 445nm's in Moh's kits, all driven at 1.62A. With a G2 lens, one LPM'd at 1.95W, one at 1.89W, and one at 2.03W.

With regular Axiz glass most will put out about 30% less on average from what I can tell.

Glenn

Using the aixiz 3 element is not recommended for a 1.8 amp build because most of that 30% energy is being turned into heat but some gets reflected back into diode shortening its life.

Ah Okay. Never knew it was that much. Would that also contribute to a hotter diode/heatsink? If I was to get a new lens, I could simply screw it in to the Aixiz module right? And G1 or G2 is the best for this right?

The only problem I have is the G1/G2 make the beam look much more like a line, but I guess if that significantly increases the life and strength of my laser it's worth it.
 
Joined
Nov 19, 2011
Messages
294
Points
0
It will screw right into the Aixiz module just like your lens now. I only have a G2, so I don't know about the G1.

Glenn
 
Joined
Sep 13, 2008
Messages
57
Points
0
Ah Okay. Never knew it was that much. Would that also contribute to a hotter diode/heatsink? If I was to get a new lens, I could simply screw it in to the Aixiz module right? And G1 or G2 is the best for this right?
It depends on which supplier you get your lens from most of the time. I think Jayrobs 405 G1 lens puts out the most output. Yes, you can just screw the lens on to your Aixiz module.

The only problem I have is the G1/G2 make the beam look much more like a line, but I guess if that significantly increases the life and strength of my laser it's worth it.
The output will definitely increase with the G1/G2, but the divergence will be worse.
 




Top