- Joined
- Nov 4, 2010
- Messages
- 404
- Points
- 18
delete pleas
Last edited:
LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
My new 445! :D (Mod please move to 445 section)
- Thread starter Jollyrajer73
- Start date
- Status
lazeerer
0
- Joined
- May 25, 2010
- Messages
- 3,655
- Points
- 0
Re: Help me complete my 445! 
Everything is correct.
IIRC DTR Uses the White wire on the diode as the Case Neutral Pin.
You have to take off the back of the AixiZ module in order for it to fit inside the C6. Then you will see if the white wire is the case pin which iam pretty sure it is. But make sure. "Iam talking about the white wire on the diode"
First Rub the Green and white wire together to discharge the Caps on the driver so it doesn't kill your diode.
Then connect your Green wire from the driver to the black wire then connect the white wire to the red wire.
You can then either tape up the white wire so it doesn't touch anything or desolder it or cut it flush to the pin its soldered too.
Put everything together.
Everything is correct.
IIRC DTR Uses the White wire on the diode as the Case Neutral Pin.
You have to take off the back of the AixiZ module in order for it to fit inside the C6. Then you will see if the white wire is the case pin which iam pretty sure it is. But make sure. "Iam talking about the white wire on the diode"
First Rub the Green and white wire together to discharge the Caps on the driver so it doesn't kill your diode.
Then connect your Green wire from the driver to the black wire then connect the white wire to the red wire.
You can then either tape up the white wire so it doesn't touch anything or desolder it or cut it flush to the pin its soldered too.
Put everything together.
Last edited:
- Joined
- Nov 4, 2010
- Messages
- 404
- Points
- 18
Re: Help me complete my 445!
Thank you lazeerer! :beer:
What do you mean by "rub" the green and white together?
Thank you lazeerer! :beer:
What do you mean by "rub" the green and white together?
lazeerer
0
- Joined
- May 25, 2010
- Messages
- 3,655
- Points
- 0
Re: Help me complete my 445!
In other words, the white and green wire tips that are coming off the driver that would connect to your diode touch them together a few times. "Like you are shorting them together"
This will discharge the caps on the driver to make sure they are not charged up and and up killing your diode by chance.!
In other words again the striped ends of the White and green wire coming off the driver. Rub them together to discharge the caps on the driver before you connect it to the diode.
If you dont do this there is a Chance it will kill your diode.
In other words, the white and green wire tips that are coming off the driver that would connect to your diode touch them together a few times. "Like you are shorting them together"
This will discharge the caps on the driver to make sure they are not charged up and and up killing your diode by chance.!
In other words again the striped ends of the White and green wire coming off the driver. Rub them together to discharge the caps on the driver before you connect it to the diode.
If you dont do this there is a Chance it will kill your diode.
Last edited:
- Joined
- Nov 4, 2010
- Messages
- 404
- Points
- 18
Re: Help me complete my 445!
alright then
so with the LD's case pin should that be left alone, should i just do nothing at all with it?
alright then
so with the LD's case pin should that be left alone, should i just do nothing at all with it?
lazeerer
0
- Joined
- May 25, 2010
- Messages
- 3,655
- Points
- 0
Re: Help me complete my 445!
Yes you are correct. Dont do anything with it. Tape it up or cut it off as close to the pin its attached to and tap the tip or de solder it off the diode.
Yes you are correct. Dont do anything with it.
Tape it up or cut it off as close to the pin its attached to and tap the tip or de solder it off the diode.
Last edited:
jimdt7
0
- Joined
- Feb 5, 2011
- Messages
- 1,893
- Points
- 48
Re: Help me complete my 445!
Everything looks great, and your questions where answered by Lazereer.
So about the diode's white cable, just cut it and insulate it, so it wont short anything out.
Jim
Everything looks great, and your questions where answered by Lazereer.
So about the diode's white cable, just cut it and insulate it, so it wont short anything out.
Jim
Last edited:
lazeerer
0
- Joined
- May 25, 2010
- Messages
- 3,655
- Points
- 0
Re: Help me complete my 445!
You spelled my name wrong.
It can get confusing since there is a company name similar to mine.
You spelled my name wrong.
It can get confusing since there is a company name similar to mine.
Last edited:
- Joined
- Nov 4, 2010
- Messages
- 404
- Points
- 18
My new 445!
Thank you again
pics updated in original post
Thank you again
pics updated in original post
- Status
