Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Lazerer rifle problem

Joined
Feb 22, 2013
Messages
4
Points
0
My rifle's scattering it came out 2weeks ago there was a dirt on the lens I tried to clean it then is broken Now it's scattering also I sent 2-3 emails to max and no response and i recorded a video


The link : http://http://www.youtube.com/watch?v=cQuPdw5AkUQ

I tried to contact max but no response i can pay the price for the lens but again no response
 
Last edited:





Joined
Oct 14, 2011
Messages
2,369
Points
83
Hey there! Video is not working for me.. However you probably messed up the lens trying to clean it. It is really hard to clean a lens with normal household items.

I dont know your knowledge with lasers but you can order a new 3 element or G lens and put it in your rifle assuming the output itself is ok.

You can unscrew the heatsink part. Then turn out the brass heatsink with needle nose pliers and then you can unscrew the lens with the needle nose pliers aswell. Again not recommended when you dont have any experience.

Also max could be swamped with mails right now just after the chinese holiday!

Greetings..
 
Last edited:
Joined
Mar 30, 2013
Messages
7
Points
0
What did you try to clean it with?

I hope you don't say your shirt, paper towel, or any old rag...
 
Joined
Mar 11, 2013
Messages
1,541
Points
83
Thats the newer version of the rifle and replacing the lens is easy. just unscrew that focus until it comes off, like you do in the video. then the lens can be seen poking out, in the focus cap you have just removed. your video shows this at 3:55. unscrew this and screw in a new one. Pretty sure either of these will work:
www.rayfoss.com
445nm AR Coated Standard Glass Lens Assembly
Hope this is exactly what you need
I recently had to replace my lens exactly like yours. It took about three weeks, but the lenses from rayfoss for sure work, and are very easy to put in

the reason the video didnt work is the link has http twice, slice one off and it works
 
Last edited:
Joined
Mar 27, 2011
Messages
14,125
Points
113
Here's the video...


Looks like the lens just needs to be adjusted, and cleaned. Or if it's scratched up, replaced.
 




Top