Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Iso-Tip cordless soldering iron

BowtieGuy

0
LPF Site Supporter
Joined
Oct 14, 2012
Messages
6,090
Points
113
Hey guys, I know there are tons of soldering iron threads out there, but my question is about a specific one. It's the "Iso-Tip cordless soldering iron" Link.
There are 3 similar variations, the 7700,7800, & 7900 series. Also, many tip styles are available.

Yes, I realize that it's a cordless model, and that, in general they have been labeled as not very good - not hot enough, doesn't stay charged, etc.

I have had some limited experience with an older model, see pics below.
It seemed to work pretty well till it died, (15+ yrs. old).

According to their specs., the irons have:

  • 900 deg. F. temp.
  • 10 sec. warm-up time
  • 100-125 joint soldering capacity per charge
  • As low as 60 min. total charge time (dependent on mod.)

I guess I'd like to know if anyone has any experience with this brand; or what you think of them in general.
It would be for light duty use.

I've seen some reviews which seem pretty positive. Your input would be appreciated!

Thanks


Q1NuMGD.jpg


ai7FDJC.jpg
 
Last edited:





ARG

0
Joined
Feb 27, 2011
Messages
6,772
Points
113
I'm very happy with my butane iron, it does the job when I need to be wireless. Gets very hot and holds enough butane to last quite a while. :)
 

BowtieGuy

0
LPF Site Supporter
Joined
Oct 14, 2012
Messages
6,090
Points
113
I hadn't thought of butane, what type do you own, is it one of those from Iso-Tip, or something else?
 

ARG

0
Joined
Feb 27, 2011
Messages
6,772
Points
113
I forget the brand, sorry! I would check what brand it is, but I don't have access to it for the moment. I got it used from someone who bought it, but never used it.
 
Joined
Dec 31, 2012
Messages
904
Points
0
Ive used those butane ones, too, from DX. They work just fine.
When you're 150 feet of the ground, atop a radio tower on a mountain, I'm not too,picky.
All that matters is it gets hot and melts the solder. :)

But honestly, for a bench, there's little reason to go wireless, IMO.

But to each his own.
 

NKO29

0
Joined
Jun 6, 2013
Messages
861
Points
28
Yeah, if you have no need for portability DO NOT use cordless soldering irons. From my experience a good wall powered iron beats any portable device in terms of best quality soldering :) if you're going to buy a soldering iron, don't buy a cheap and nasty one... They won't last as long and you won't get the same results as a good iron will!
-Josh
 

BowtieGuy

0
LPF Site Supporter
Joined
Oct 14, 2012
Messages
6,090
Points
113
Hey guys, thanks for all the input. I agree, a good wall powered iron is best. :)
This would mostly be used where wireless would be easier.
I will also have to look into the butane powered models, hadn't considered them before.
 




Top