Help.. with old computer

HI I am in need of help. Is there anyway i can build a burning laser without buying any parts, by just using the scraps i have from an old computer. I aalready have the a DVD burner diode. I now there may be threads about it but i just can find an understandable thx and srr for my english

No, you'll need some additional things like a driver, a focusing lens for the diode and something to house it in.

check it out:

DIY: Hack a Dead Computer into a Burning Laser! - YouTube

No!!! you will not be able to build a laser with the parts you have on hand.

Unless you happen to have:

a lens
module
heatsink (drilled to fit module)
driver and a
propeer power supply.
laying around

michael.

ok thx guys also do modules include the lense and th driver? and also i havnt seen any tutorial out there on how to put the diode on the driver? and please correct me

steps
i take the diode out of the dvd burner
fit the diode in the driver
connect the power supply to the driver
fit the driver in the module and viola?

thx for all the help

satiro1989 said:

ok thx guys also do modules include the lense and th driver? and also i havnt seen any tutorial out there on how to put the diode on the driver? and please correct me

steps
i take the diode out of the dvd burner
fit the diode in the driver
connect the power supply to the driver
fit the driver in the module and viola?

thx for all the help

Click to expand...

Aixiz modules include the lens and a focusing ring. You buy/build the driver depending on how you want to power your laser. So the steps would be:

i take the diode out of the dvd burner
fit the diode in the Aixiz module
connect the completed module to the driver after you've tested your current using a dummy load
and viola

It's a bit more complicated than it seems. Here's a good thread you should read to get you started.

http://laserpointerforums.com/f51/i-want-build-laser-thread-52972.html