Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Harvesting / Teardown of the Pico1 Projector - 450nm, 640nm, + non-DPSS Green






H

heruursciences

0
Joined
Feb 11, 2008
Messages
730
Points
0
IMHO, I doubt it really is a single pass ppln device, more like a extended cavity device. One way to find out.....
 
benmwv

benmwv

0
Joined
Sep 10, 2010
Messages
1,380
Points
48
For me the green would be the main reason to get it.

I think it was himnl9 that said the crystal is temperature tuned for the pump wavelength, so I would set up a simple ddl for like 200ma and hook it to two pins then slowly heat it. If it gets fairly warm and never lights up then switch to other pins and repeat. Once it does light record the temperature, then it should be fairly easy to find the pins for the internal heater.

Ohh and side note rhd: that package still hasn't arrived yet, weird right?
 
Last edited:
rhd

rhd

0
Joined
Dec 7, 2010
Messages
8,475
Points
0
benmwv:

- That is weird, in fact absolutely nothing I shipped last weekend (I shipped a dozen or so things) has reached anyone - even the stuff that was staying within Canada.

I have some shipping to do this evening (or maybe tomorrow depending on how quick I am at packaging), so I'll inquire if it's the same person working. They generally remember you when you ship 12 things at once ;)
 
benmwv

benmwv

0
Joined
Sep 10, 2010
Messages
1,380
Points
48
Well it's good to know it's not just me, I was starting to worry it was lost in the mail, or my senile mail lady had given it to someone else (which she does a few times a year).
 
qumefox

qumefox

0
Joined
Mar 26, 2010
Messages
3,220
Points
0
And of course he doesn't take apart the part we care about. heh.
 
I

impulse

0
Joined
Sep 21, 2011
Messages
4
Points
0
Hi, Here's a photo of the cavity of the green laser. It seems to be built on a silicon substrate. Picoprojector_green.jpg
 
HIMNL9

HIMNL9

0
Joined
May 26, 2009
Messages
5,318
Points
0
Hm ..... it look as a direct-coupled diode-crystal assembly, placed in a folded cavity ..... not sure about the electro-actuated optical element in the middle of the cavity, can be a piezo-drived etalon unit ? ..... like in the Fabry-Perot interferometers ? ..... just an idea, i'm not sure about this, anyway :thinking:

Powering the diode chip (the two lower contacts) only, does it produce any green ?
 
I

impulse

0
Joined
Sep 21, 2011
Messages
4
Points
0
Didn't fire it up yet... I think the laser has an optically pumped Nd:YVO or semiconductor gain medium. The nonlinear crystal is periodically poled (visible under microscope) and sits on top of a thin film heating element. The cavity end mirror seems to have a concave inner surface.
 
HIMNL9

HIMNL9

0
Joined
May 26, 2009
Messages
5,318
Points
0
Then is probably an intracavity setup, with the 808-1064 directly coupled to the LD, and the doubler in the cavity (the concavity of the end mirror is probably focused in the center of the crystal, for better efficence) ..... is strange that there is no thermal sensing, together with the heating unit, anyway ..... wondering how they drive the assembly, during the normal working cycle, and how they can stabilize the temperature without a feedback, in this case .....
 
BShanahan14rulz

BShanahan14rulz

0
Joined
Dec 29, 2009
Messages
3,136
Points
63
So it isn't anything all that exotic, just a different cavity arrangement? Still see what I assume is an 808nm diode, a temp stabilized doubler, and a Nd:YAG or YVO4, but with an output mirror between the yag and the doubler?

Thanks for the pic, love seeing guts like this, it's like a puzzle!
 
You must log in or register to reply here.




Top