- Joined
- Aug 30, 2008
- Messages
- 6,891
- Points
- 83
So my "low" gear ate itself away. After taking apart my lathe and discovering this, i ordered replacement parts and started to reassemble it (it will still work in high gear)
Well when i was getting ready to mount the circuit board back up i realized the two power cords were unplugged!
the main black and white cords that come directly from the 110v AC plug are not attached to anything and i cannot figure out what they plug into!
So does anyone have this lathe?
I'm hoping someone can open theirs up and take a quick picture for me so i can seew here they go.
It's the box that has the pot, on/off switch and fuse.
it just has two screws on top and two on bottom, and you can open it right up and snap a picture.
Well when i was getting ready to mount the circuit board back up i realized the two power cords were unplugged!
the main black and white cords that come directly from the 110v AC plug are not attached to anything and i cannot figure out what they plug into!
So does anyone have this lathe?
I'm hoping someone can open theirs up and take a quick picture for me so i can seew here they go.
It's the box that has the pot, on/off switch and fuse.
it just has two screws on top and two on bottom, and you can open it right up and snap a picture.