Laser pointer discussion. Read/write reviews of laser pointers and laser pointer companies. Learn about all types of laser pointers and lasers





Welcome to Laser Pointer Forums! If you are looking for a laser pointer or want to compare different laser pointer companies, you may want to check out the LPF Laser Pointer Company Database. The link will open in a new window for your convenience.








Green Laser Pointers by Category Blue Laser Pointers by Category Red Laser Pointers by Category
Yellow Laser Pointers by Category Violet Laser Pointers by Category Orange Laser Pointers by Category
Top Laser Pointers by Power - 1 Watt+ Top Laser Pointers by Power - 500mW+ Top Laser Pointers by Power - 250mW+
Laser Pointer Database High Power Laser Pointers Laser Pointer Diodes
Laser Technology Laser Pointer Parts Lasers by Wavelength
Top 10 Laser Pointer Companies Laser Pointer Company Database Visible Beam Laser Pointers


One laser store meets all your needs

























Go Back   Laser Pointer Forums - Discuss Laser Pointers > Lasers > Tutorials, Help & Repairs



LPF List of Laser Pointer Companies (link opens new window)



Reply
 
LinkBack Thread Tools Display Modes
Old 10-10-2010, 08:38 PM #49
DTR's Avatar
DTR DTR is online now
Class 4 Laser
 
Join Date: Jun 2010
Location: St. Louis MO
Posts: 5,482
Rep Power: 10819
DTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond repute
DTR DTR is online now
Class 4 Laser
DTR's Avatar
 
Join Date: Jun 2010
Location: St. Louis MO
Posts: 5,482
Rep Power: 10819
DTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond repute
Default Re: Flexdrive Driver Heatsink for Continuous driver duty cycle @ 1.5A

Quote:
Originally Posted by Crazy Jay View Post
Glad to hear that the driver was the problem ... well not glad that it got damaged DTR but rather that the host can still provide the ability to run this diode at high power levels.

So the resistor stays on then huh
Apparently it does stay on. I just am not sure why he bothers to say to remove it in his manual?


DTR is online now   Reply With Quote







LPF List of Laser Pointer Companies (link opens new window)







Old 10-10-2010, 10:25 PM #50
drlava's Avatar
Class 3R Laser
 
Join Date: Mar 2007
Posts: 1,152
Rep Power: 71
drlava has a reputation beyond reputedrlava has a reputation beyond reputedrlava has a reputation beyond reputedrlava has a reputation beyond reputedrlava has a reputation beyond reputedrlava has a reputation beyond reputedrlava has a reputation beyond reputedrlava has a reputation beyond reputedrlava has a reputation beyond reputedrlava has a reputation beyond reputedrlava has a reputation beyond repute
Send a message via AIM to drlava
drlava drlava is offline
Class 3R Laser
drlava's Avatar
 
Join Date: Mar 2007
Posts: 1,152
Rep Power: 71
drlava has a reputation beyond reputedrlava has a reputation beyond reputedrlava has a reputation beyond reputedrlava has a reputation beyond reputedrlava has a reputation beyond reputedrlava has a reputation beyond reputedrlava has a reputation beyond reputedrlava has a reputation beyond reputedrlava has a reputation beyond reputedrlava has a reputation beyond reputedrlava has a reputation beyond repute
Send a message via AIM to drlava
Default Re: Flexdrive Driver Heatsink for Continuous driver duty cycle @ 1.5A

Hi, yes that last resistor can stay on. I've updated the shipping manual for the latest batch of V5's to fix this.
drlava is offline   Reply With Quote
Old 10-10-2010, 10:57 PM #51
Banned
 
Join Date: Aug 2009
Posts: 2,203
Rep Power: 0
Crazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond repute
Crazy Jay Crazy Jay is offline
Banned
 
Join Date: Aug 2009
Posts: 2,203
Rep Power: 0
Crazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond repute
Default Re: Flexdrive Driver Heatsink for Continuous driver duty cycle @ 1.5A

DrLava how much for a V5 with wires attached?
That's if you can do that...
Crazy Jay is offline   Reply With Quote
Old 10-10-2010, 11:00 PM #52
Banned
 
Join Date: Aug 2009
Posts: 2,203
Rep Power: 0
Crazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond repute
Crazy Jay Crazy Jay is offline
Banned
 
Join Date: Aug 2009
Posts: 2,203
Rep Power: 0
Crazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond repute
Default Re: Flexdrive Driver Heatsink for Continuous driver duty cycle @ 1.5A

Quote:
Originally Posted by Crazy Jay View Post
I can send you a few coins. Just found a bunch of them laying around.

Just pay for the prestamped envelope. I'll find out how much it would cost to go to brazil
98 cents
Crazy Jay is offline   Reply With Quote
Old 10-10-2010, 11:13 PM #53
jayrob's Avatar
Class 4 Laser
 
Join Date: Sep 2007
Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,851
Rep Power: 3922
jayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond repute
jayrob jayrob is online now
Class 4 Laser
jayrob's Avatar
 
Join Date: Sep 2007
Location: Northern CA, U.S. Astrophotography! (Some of my Photos)
Posts: 9,851
Rep Power: 3922
jayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond reputejayrob has a reputation beyond repute
Default Re: Flexdrive Driver Heatsink for Continuous driver duty cycle @ 1.5A

Quote:
Originally Posted by drlava View Post
Hi, yes that last resistor can stay on. I've updated the shipping manual for the latest batch of V5's to fix this.
Thanks for that clarification drlava...
__________________
Personal lasers:
(just a few - too many to list) RPL 425, Sypder III Krypton, RPL 35 (473), GLP-473, GLP-593.5, HeNe 632.8,
Many DIY 445, red, blu-ray, green, 635, and 450 builds...


Looking for a DIY kit?


Take a look at some of my more popular kits linked in color...

* FS: 405-G-1 Glass Lens Mod for Blu-ray! 31% increase in power vs AixiZ acrylic!

* FS: New! 1000 Lumen XML-2 Maglite Modification With Voltage Monitor! - Parts or Complete Light! Must see!

* FS: Polished Stainless Steel Green Kit! Easy assembly in minutes!

* FS: Large Maglite Monster Kits! Side Button Forward Clicky! Custom Head Option! Gnarly...


Click here for a list of my build kits! Projects and tutorials too!

jayrob is online now   Reply With Quote
Old 10-11-2010, 01:06 AM #54
DTR's Avatar
DTR DTR is online now
Class 4 Laser
 
Join Date: Jun 2010
Location: St. Louis MO
Posts: 5,482
Rep Power: 10819
DTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond repute
DTR DTR is online now
Class 4 Laser
DTR's Avatar
 
Join Date: Jun 2010
Location: St. Louis MO
Posts: 5,482
Rep Power: 10819
DTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond repute
Default Re: Flexdrive Driver Heatsink for Continuous driver duty cycle @ 1.5A

Quote:
Originally Posted by drlava View Post
Hi, yes that last resistor can stay on. I've updated the shipping manual for the latest batch of V5's to fix this.
Thanks for the info. That will make it a little easier to set these up.
DTR is online now   Reply With Quote
Old 10-13-2010, 11:41 PM #55
DTR's Avatar
DTR DTR is online now
Class 4 Laser
 
Join Date: Jun 2010
Location: St. Louis MO
Posts: 5,482
Rep Power: 10819
DTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond repute
DTR DTR is online now
Class 4 Laser
DTR's Avatar
 
Join Date: Jun 2010
Location: St. Louis MO
Posts: 5,482
Rep Power: 10819
DTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond repute
Default Re: Flexdrive Driver Heatsink for Continuous driver duty cycle @ 1.5A

Alright I threw in a new Flexdrive in the 18650 Aurora Cree and now it is running like a beast.

DTR is online now   Reply With Quote
Old 10-14-2010, 12:22 AM #56
Banned
 
Join Date: Aug 2009
Posts: 2,203
Rep Power: 0
Crazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond repute
Crazy Jay Crazy Jay is offline
Banned
 
Join Date: Aug 2009
Posts: 2,203
Rep Power: 0
Crazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond reputeCrazy Jay has a reputation beyond repute
Default Re: Flexdrive Driver Heatsink for Continuous driver duty cycle @ 1.5A

YES!! I knew it!

Just over 200mw loss past 3 minutes! Excellent DTR, excellent

Man you don't know how happy that makes me
Crazy Jay is offline   Reply With Quote
Old 10-14-2010, 05:12 PM #57
DTR's Avatar
DTR DTR is online now
Class 4 Laser
 
Join Date: Jun 2010
Location: St. Louis MO
Posts: 5,482
Rep Power: 10819
DTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond repute
DTR DTR is online now
Class 4 Laser
DTR's Avatar
 
Join Date: Jun 2010
Location: St. Louis MO
Posts: 5,482
Rep Power: 10819
DTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond repute
Default Re: Flexdrive Driver Heatsink for Continuous driver duty cycle @ 1.5A

Flexdrives back in stock
DTR is online now   Reply With Quote
Old 10-15-2010, 02:16 AM #58
jkardon1992's Avatar
Class 1 Laser
 
Join Date: Oct 2010
Posts: 55
Rep Power: 7
jkardon1992 will become famous soon enough
jkardon1992 jkardon1992 is offline
Class 1 Laser
jkardon1992's Avatar
 
Join Date: Oct 2010
Posts: 55
Rep Power: 7
jkardon1992 will become famous soon enough
Default Re: Flexdrive Driver Heatsink for Continuous driver duty cycle @ 1.5A

alright im kinda a n00b so i have alot of questions.
first off i dont really have to tools to sand down the dollar, is that okay if i just leave it as is?
second off, is there any difference between the posotive wire and the negative wire besides which one you solder it to and the color? like are they both just blank wireS?
also i didnt really see where the negative wire was connected too, i got that the potisitive purple wire was soldered to the screw from the other side, but i didnt really see where the green one was soldered too...

okay lemme get this striaght,
on the pill, trill a hole through the board, solder a spring on, and solder the positive purple wire in the center to the spring, then, attach the green wire to the other wire comming from the edge of the board on the inside, and put those both through the holes in the coin to the drives positive and negative pads? then attach wire to the output of the driver to the wires from the diode?
__________________
200mW ASKY
400mW Rayfoss Laser
200mW Lazerer
jkardon1992 is offline   Reply With Quote
Old 10-15-2010, 02:17 AM #59
jkardon1992's Avatar
Class 1 Laser
 
Join Date: Oct 2010
Posts: 55
Rep Power: 7
jkardon1992 will become famous soon enough
jkardon1992 jkardon1992 is offline
Class 1 Laser
jkardon1992's Avatar
 
Join Date: Oct 2010
Posts: 55
Rep Power: 7
jkardon1992 will become famous soon enough
Default Re: Flexdrive Driver Heatsink for Continuous driver duty cycle @ 1.5A

do yo u think the new Rckstr driver would work fine instead of the driver you used?
__________________
200mW ASKY
400mW Rayfoss Laser
200mW Lazerer
jkardon1992 is offline   Reply With Quote
Old 10-15-2010, 02:37 AM #60
DTR's Avatar
DTR DTR is online now
Class 4 Laser
 
Join Date: Jun 2010
Location: St. Louis MO
Posts: 5,482
Rep Power: 10819
DTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond repute
DTR DTR is online now
Class 4 Laser
DTR's Avatar
 
Join Date: Jun 2010
Location: St. Louis MO
Posts: 5,482
Rep Power: 10819
DTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond repute
Default Re: Flexdrive Driver Heatsink for Continuous driver duty cycle @ 1.5A

Quote:
Originally Posted by jkardon1992 View Post
do yo u think the new Rckstr driver would work fine instead of the driver you used?
I don't remember the specs on the Rckstr but I can tell you that you don't want it for a 445 build and this thread is about the maxing out a flexdrive without overheating issues. Check out some of the sticky's.

You might want to start here.
The, "I want to build a laser", Thread

Also FYI double posting is frowned upon. You can use the edit button on your post to add info.

to the forum.
DTR is online now   Reply With Quote
Old 10-15-2010, 09:43 PM #61
jkardon1992's Avatar
Class 1 Laser
 
Join Date: Oct 2010
Posts: 55
Rep Power: 7
jkardon1992 will become famous soon enough
jkardon1992 jkardon1992 is offline
Class 1 Laser
jkardon1992's Avatar
 
Join Date: Oct 2010
Posts: 55
Rep Power: 7
jkardon1992 will become famous soon enough
Default Re: Flexdrive Driver Heatsink for Continuous driver duty cycle @ 1.5A

i read that other thread, and im technically building a 405nm. do you think that would be okay?
__________________
200mW ASKY
400mW Rayfoss Laser
200mW Lazerer
jkardon1992 is offline   Reply With Quote
Old 10-15-2010, 09:51 PM #62
DTR's Avatar
DTR DTR is online now
Class 4 Laser
 
Join Date: Jun 2010
Location: St. Louis MO
Posts: 5,482
Rep Power: 10819
DTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond repute
DTR DTR is online now
Class 4 Laser
DTR's Avatar
 
Join Date: Jun 2010
Location: St. Louis MO
Posts: 5,482
Rep Power: 10819
DTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond reputeDTR has a reputation beyond repute
Default Re: Flexdrive Driver Heatsink for Continuous driver duty cycle @ 1.5A

Quote:
Originally Posted by jkardon1992 View Post
i read that other thread, and im technically building a 405nm. do you think that would be okay?
My preference would be to go with a microboost on a 405 build.
DTR is online now   Reply With Quote
Old 10-15-2010, 10:09 PM #63
jkardon1992's Avatar
Class 1 Laser
 
Join Date: Oct 2010
Posts: 55
Rep Power: 7
jkardon1992 will become famous soon enough
jkardon1992 jkardon1992 is offline
Class 1 Laser
jkardon1992's Avatar
 
Join Date: Oct 2010
Posts: 55
Rep Power: 7
jkardon1992 will become famous soon enough
Default Re: Flexdrive Driver Heatsink for Continuous driver duty cycle @ 1.5A

Quote:
Originally Posted by DTR View Post
My preference would be to go with a microboost on a 405 build.
why? what is different about that from the Rckstr? would the actual process of building it be any different?
__________________
200mW ASKY
400mW Rayfoss Laser
200mW Lazerer
jkardon1992 is offline   Reply With Quote
Old 10-15-2010, 11:20 PM #64
Morgan's Avatar
Class 3R Laser
 
Join Date: Feb 2009
Location: Bedfordshire, UK
Posts: 2,178
Rep Power: 243
Morgan has a reputation beyond reputeMorgan has a reputation beyond reputeMorgan has a reputation beyond reputeMorgan has a reputation beyond reputeMorgan has a reputation beyond reputeMorgan has a reputation beyond reputeMorgan has a reputation beyond reputeMorgan has a reputation beyond reputeMorgan has a reputation beyond reputeMorgan has a reputation beyond reputeMorgan has a reputation beyond repute
Morgan Morgan is offline
Class 3R Laser
Morgan's Avatar
 
Join Date: Feb 2009
Location: Bedfordshire, UK
Posts: 2,178
Rep Power: 243
Morgan has a reputation beyond reputeMorgan has a reputation beyond reputeMorgan has a reputation beyond reputeMorgan has a reputation beyond reputeMorgan has a reputation beyond reputeMorgan has a reputation beyond reputeMorgan has a reputation beyond reputeMorgan has a reputation beyond reputeMorgan has a reputation beyond reputeMorgan has a reputation beyond reputeMorgan has a reputation beyond repute
Default Re: Flexdrive Driver Heatsink for Continuous driver duty cycle @ 1.5A

^Only powering it and fitting a larger driver like the RKCSTR into this small space. It's a linear driver, not a buck/boost driver like the Flexdrive, (unless things have changed since I last used a RKCSTR and they are now boost drivers). Check the specs in the sales threads for both.


I've been watching this thread with interest and the simple solutions are great! I have one thing to add though. With really good heatsinking of the diode and the driver, I've noticed with my 18650 host that the body gets close to too hot to hold. This shows that the heat is effectively moved to the outside of the host but at that point you start to heat the battery compartment and that's risky with these lithium-ions. The host being so small limits how much heat can be radiated. Continuous duty cycle it may be, but if you can't touch it...

Just my observations and I still like the solutions from DTR!

M
__________________
Do you want to build a laser? But, you know nothing about what is needed, right? Then you need to try the, "I Want to Build a Laser", thread! Everything you wanted to know to get started and more! An easy guide as to what you need and why!

Another good guide can be found here from goninanbl00d - "First Build Guide"
(Temporarily Unavailable)

" ... Lasing on a sunny afternoon." The Kinks.

"Lasing on a Sunday Afternoon." Queen.

" Lase-y Sunday afternoon, I've got no mind to worry... " Small Faces.

"... Yes. It died during the night... So I cooked it! It was very nice." My Dad

Assembly services, parts machined and consultations for specialist builds available. PM me if you need something. Thanks.

Last edited by Morgan; 10-15-2010 at 11:27 PM.
Morgan is offline   Reply With Quote
Reply





Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


LinkBacks (?)
LinkBack to this Thread: http://laserpointerforums.com/f51/flexdrive-driver-heatsink-continuous-driver-duty-cycle-1-5a-56404.html
Posted By For Type Date
1W 445nm Blue Laser Module W/Flexdrive & Aixiz Glass | eBay This thread Refback 06-04-2015 10:44 PM
Untitled document This thread Refback 01-05-2014 05:56 PM
Untitled document This thread Refback 01-03-2014 09:31 AM
Untitled document This thread Refback 10-27-2013 06:13 PM
Mitsubishi 635nm 300mW Red Laser Diode ML520G71 | eBay This thread Refback 10-25-2013 03:14 AM
Untitled document This thread Refback 07-20-2013 06:15 PM
1 5 2W 445nm Blue Diode in Module w Leads G 2 Lens | eBay This thread Refback 06-14-2013 08:19 AM
700mw 12x 405nm S06j Blu-ray Laser Diode In Module W/leads Auctions - Buy And Sell - FindTarget Auctions This thread Refback 01-26-2013 02:13 PM
Untitled document This thread Refback 10-02-2012 10:02 PM
Mitsubishi 500mW 638nm Orange Red Laser Diode TO18 5.6mm ML501P73-02 | eBay This thread Refback 07-22-2012 12:39 PM
eBay | 1.5-2W 445nm Blue Diode in Module W/Leads & G-2 Lens This thread Refback 06-17-2012 11:37 PM
1W 445nm Blue Laser Diode From XX-X140 DLP Projector en vente sur eBay.fr (fin le 15-juil.-11 04:47:31 Paris) This thread Refback 02-24-2012 06:18 PM
Untitled document This thread Refback 02-10-2012 01:54 PM
Untitled document This thread Refback 02-01-2012 11:33 PM
445nm 1.5-2W Blue Laser Diode | eBay This thread Refback 01-24-2012 06:12 PM
Reviews & Tutorials - DTR's Laser Shop This thread Refback 01-21-2012 11:40 AM
445nm 1.5-2W Blue Laser Diode W/ lens | eBay This thread Refback 01-06-2012 09:02 AM
Mitsubishi 635nm 300mW Red Laser Diode ML520G71 | eBay This thread Refback 12-31-2011 06:01 PM
1.5-2W 445nm Blue Diode in Module W/Leads & G-2 Lens | eBay This thread Refback 12-13-2011 07:19 AM
Prewired Micro Flexdrive for 405/445nm Laser Diodes | eBay This thread Refback 12-07-2011 09:09 AM
Untitled document This thread Refback 11-21-2011 04:42 PM
Untitled document This thread Refback 11-17-2011 09:32 PM
445 - 44 - Hobbi TV This thread Refback 11-14-2011 03:52 AM
1.5-2W 445nm Blue Diode in Module W/Leads & Aixiz Glass | eBay This thread Refback 11-05-2011 09:16 AM
1W 445nm Blue Laser Module W/Flexdrive & Aixiz Glass | eBay This thread Refback 10-19-2011 03:32 PM
445 - 43 - Hobbi TV This thread Refback 10-17-2011 10:42 PM
Untitled document This thread Refback 10-15-2011 01:59 PM
1.5-2W 445 nm Blue Laser Diode In Module W/Leads | eBay This thread Refback 10-02-2011 02:22 PM
1.5-2W 445 nm Blue Laser Diode In Module W/Leads | eBay This thread Refback 09-30-2011 06:22 PM
445nm 405nm Three Element Glass Lens for Aixiz Module | eBay This thread Refback 09-28-2011 07:13 PM
3 pack 1.5-2W 445 nm Blue Laser Diode in Module W/Leads | eBay This thread Refback 09-28-2011 12:07 PM
Micro Flexdrive V5 Laser Driver for 405/445nm Diodes | eBay This thread Refback 09-28-2011 04:41 AM
3pk 1.5-2W 445nm Blue Laser Module W/Leads&Aixiz Glass | eBay This thread Refback 09-07-2011 02:13 PM
. - 8 - Hobbi TV This thread Refback 09-06-2011 11:12 AM
Untitled document This thread Refback 08-23-2011 03:34 PM
Untitled document This thread Refback 08-22-2011 06:52 PM
eBay - New & used electronics, cars, apparel, collectibles, sporting goods & more at low prices This thread Refback 08-21-2011 04:59 AM
445nm 1.5-2W Blue Laser Diode W/ lens | eBay This thread Refback 08-12-2011 05:07 PM
Untitled document This thread Refback 08-02-2011 02:35 PM
Untitled document This thread Refback 07-13-2011 06:48 AM
Untitled document This thread Refback 06-27-2011 10:07 PM
Untitled document This thread Refback 06-26-2011 07:18 PM
????????? ??????? ????????? ?? Micro Flex Drive V5 (1.5A max) | ???????? 2 | LASERS.ORG.RU This thread Refback 05-31-2011 03:33 PM
eBay.ph: Prewired Micro FlexDrive V5 for 445nm Diode (item 170599847711 end time Feb 09, 2011 15:41:50 PHT) This thread Refback 04-14-2011 10:54 PM
Untitled document This thread Refback 04-12-2011 12:36 AM
445 - 53 - Hobbi TV This thread Refback 04-07-2011 06:57 PM
Prewired Micro FlexDrive V5 for 445nm Diode on eBay (end time 17-Feb-11 20:16:41 GMT) This thread Refback 03-24-2011 08:11 PM
????? ????? ?? ???????? MicroFlexDrive_V5 | LASERS.ORG.RU This thread Refback 03-02-2011 05:41 AM
- 2 - Hobbi TV This thread Refback 02-19-2011 09:53 AM
445 - 53 - Hobbi TV This thread Refback 02-18-2011 03:38 PM










Loading








Green Laser Pointers by Category Blue Laser Pointers by Category Red Laser Pointers by Category
Yellow Laser Pointers by Category Violet Laser Pointers by Category Orange Laser Pointers by Category
Top Laser Pointers by Power - 1 Watt+ Top Laser Pointers by Power - 500mW+ Top Laser Pointers by Power - 250mW+
Laser Pointer Database High Power Laser Pointers Laser Pointer Diodes






Privacy Policy | Advertising Disclaimer | Terms of Use


 


All times are GMT. The time now is 09:35 PM.


Powered by: vBulletin
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO
Privacy Policy | Advertising Disclaimer | Terms of Use
Copyright (C) 2017 Laser Pointer Forums, LLC