Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

First Build - Need Advice/Direction






Joined
May 14, 2013
Messages
3,438
Points
0
okay, thank you, so if i get the original module and the C6, an unanodized heatsink and if i cut a spring so its slightly shorter it will all fit hopefully.

Will i need to remove any anodizing on the inside of the c6?

Tonka

sorry if im nagging, really want to get to building :(

Yes you need to remove enough anodizing for the host to make contact with the heat sink and module. After removing some of the anodizing you will test it with your DMM to see if it makes a good connection.

Alan
 
Joined
May 16, 2014
Messages
23
Points
3
okay, so just to finalise.
I buy the module, c6 and heatsink + batteries.
Cut of the wires and attach a spring.
de-anodise the inside of the c6.
Short the switch
and then assemble?

Thanks

Tonka
 




Top