Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Confused about laser diode drivers

D

dden4012

0
Joined
May 30, 2016
Messages
964
Points
0
HydroSean said:
Yes exactly, on DTR's site it says 2V-6V input. So just use one 3.7V lithium-ion battery with his driver.
Click to expand...
I was fishing for whether the SL driver was capable of working correctly on one sell. And yes the nano obviously works great for this diode. I don't think 1.25a would hurt this diode but the SL driver in question makes me curious. I feel the voltage range in the spec is dumbed down intentionally, the charged voltage of 4.2 1s and 8.4 2s. If I use 1 cell and the load sags the v to 4v is the driver still regulating amperage or is it too low a voltage. Or does it not buck the voltage down below 4.2v. There is headroom between the 4.2v and the max 2.7vf.
Crazlaser said:
I'll comment. I bought the diode originally and burned it out by trying to use a survival laser driver which I chose incorrectly. Then I bought the diode again the pre installed nano driver and it worked great. That's what I recommend.
Click to expand...
I agree with your recommendation as others have , I as well, the module you can't go wrong. But what specific driver from SL did you use in the mishap?
Not that I'm building another red. More interested with the whys and how's.
 





Crazlaser

Crazlaser

0
Joined
Oct 11, 2016
Messages
807
Points
43
dden4012 said:
I was fishing for whether the SL driver was capable of working correctly on one sell. And yes the nano obviously works great for this diode. I don't think 1.25a would hurt this diode but the SL driver in question makes me curious. I feel the voltage range in the spec is dumbed down intentionally, the charged voltage of 4.2 1s and 8.4 2s. If I use 1 cell and the load sags the v to 4v is the driver still regulating amperage or is it too low a voltage. Or does it not buck the voltage down below 4.2v. There is headroom between the 4.2v and the max 2.7vf.

I agree with your recommendation as others have , I as well, the module you can't go wrong. But what specific driver from SL did you use in the mishap?
Not that I'm building another red. More interested with the whys and how's.
Click to expand...
Actually thinking this through, I think the reason it died was not driver choice, it's because I briefly hooked it directly to the battery before I knew better, something you should never do because diodes will pull more and more power until they kill themselves from overheating.
 
Last edited:
You must log in or register to reply here.




Top