Blu ray mini pocket build

Ok im going to order a mini pocket kit from jayrob and plan to put an 8x blu ray diode in it. What driver, and module should i use to get very high power out of it >500

Use a flexdrive for the driver from Dr. Lava and for the module use an aixiz module which can be found at hightechdealz.com or modwerx.com. I am pretty sure you cannot get that power out of an 8x for it you would need a 12x but just search for the 8x mw/ma thread to find the current needed for a long life.

I found this thread. http://laserpointerforums.com/f38/8x-br-diodes-42806.html

The first post has a list of 8X diodes and varying power outputs. Should be helpful. Good luck with your build!!

BTW, if you getting this from jayrob, just ask him what the safe current to set it, I believe he knows this information.

Yes i have read that whole thread and all the posts to it thanks anyways, and ill ask him but i probably will end up setting it higher. I plan to build lots of lasers so no need to worry about one frying.