Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Best way to remove board from Green Module?

Joined
Apr 28, 2009
Messages
2,416
Points
63
Anyone know where the link is to remove the board/PS from the Green LD module? I thought it had been done successfully, to allow for a different physical configuration.
 





Joined
Apr 28, 2009
Messages
2,416
Points
63
This photo from the ES website, shows a green module separate from the driver.

grnptr2.jpg
 

Krutz

0
Joined
Nov 21, 2007
Messages
1,733
Points
48
i removed a driver once, 150mw o-like module. carefully removed all accessible epoxy with a dremel, then sawed (irregular verb?) with a jewelers saw (very thin blade!) between the head and driver. finally they were only connected by the two pins, somehow i managed to desolder them without destroying it.. :)
of course i destroyed the driver later, while filing away as much as possible to save space. ended replacing the driver, but thats a different story..

manuel
 




Top