- Joined
- Dec 1, 2008
- Messages
- 878
- Points
- 28
So MarioMaster has been building a RGV projector over the last few weeks for me and today is the day that I have to decide what to set the diodes at. I Just wanted to post this to have some of the more experienced members check my numbers.
Here is the driver link.... http://74.58.33.200:81/RGBLaserDiodeDriver.htm
For the SF-AW210... the test showed these numbers with the G-1 lens
130ma-191mw
150ma-241mw
180ma-284mw
200ma-335mW
So I was thinking something like 160mA to 170mA for a 4 hour duty cycle.
No tests were run on the LOC but yall should know what those numbers look like anyways....But I was thinking something like 380mA for the same 4 hour duty cycle.
PLEASE let me know what you think about these numbers
Here is a pic of the heatsink on the BR and the same will be on the LOC
Here is the driver link.... http://74.58.33.200:81/RGBLaserDiodeDriver.htm
For the SF-AW210... the test showed these numbers with the G-1 lens
130ma-191mw
150ma-241mw
180ma-284mw
200ma-335mW
So I was thinking something like 160mA to 170mA for a 4 hour duty cycle.
No tests were run on the LOC but yall should know what those numbers look like anyways....But I was thinking something like 380mA for the same 4 hour duty cycle.
PLEASE let me know what you think about these numbers
Here is a pic of the heatsink on the BR and the same will be on the LOC