Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Red laser question

Joined
Feb 16, 2010
Messages
119
Points
0
Will a 20mW 650nm laser show up in sunlight? Is it visible under direct sunlight? :thanks:
 





Joined
Feb 16, 2010
Messages
119
Points
0
The dot probably will, but the beam won't.
Are you sure? I know the beam wont (Of course) but Raybo says it won't... Im trying to decide if im getting it. Because for my purpose, the dot needs to be visible under direct sunlight
 
Joined
Feb 21, 2010
Messages
115
Points
0
I think he was talking about the beam.
the dot will probably show ( but I've never actually tested it).
 

AndyR

0
Joined
Jan 10, 2010
Messages
166
Points
0
At what distances? My 5 mW green can be seen in broad daylight, except when it gets to around ~25 feet.
 
Joined
Mar 17, 2010
Messages
217
Points
0
It will be visible, only at small distances.
A 1mW red's dot can be seen under direct sunlight, but only at less than 1 meter of distance(~3 feet).
 
Joined
Feb 16, 2010
Messages
119
Points
0
I need it to show at about 50-60 feet.
Will it made a HUGE difference if the wavelength is at 635nm? the brighter version of red
 

AndyR

0
Joined
Jan 10, 2010
Messages
166
Points
0
Reflectivity3.png
You can use this graph to see for yourself... looks like 635 is about ~10% brighter to the human eye than 650.
 
Joined
Mar 17, 2010
Messages
217
Points
0
Reflectivity3.png
You can use this graph to see for yourself... looks like 635 is about ~10% brighter to the human eye than 650.

I don't know. On this graph it looks to me like 635 is 2x brighter than 650.
Someone who had a 7mW 635nm pointer said it's beam is visible at night.
 
Joined
Mar 17, 2010
Messages
217
Points
0
According to the graph a 20mW 650nm red should be visible at about 10 feet, a 20mW 635nm at about 20 feet and a 20mW green at about 100 feet under sunlight.
At least according to me.
 
Joined
Feb 16, 2010
Messages
119
Points
0
Why not to use a green one?

Because green is "too powerful" says my friends that airsoft with me. Even the reflection off of a white paper is too bright for them. So im getting 635 red 5mW. So even if it accidently hits someone in the eye, their blink will cause damage not enough to blind them or damage permanently. Wow i actually typed that? I have no idea how i did it:confused:
 
Joined
Nov 17, 2009
Messages
2,031
Points
83
hmm.. I wouldn't fool around with direct exposure of 20mW of 650, even.

AixiZ has a decent 10mW 635 module (link), -- actualk output 6-7mW, which would likely be just as bright in appearance as 15-18 mW of 650, and quite a bit safer. I have one; it's brighter than my AtlasNova 635.

EDIT: Ok, good plan actually; 5mW of 635 will get you there with the brightness without the danger - especially if you're aiming it at faces.
 
Last edited:
D

Deleted member 8382

Guest
Because green is "too powerful" says my friends that airsoft with me. Even the reflection off of a white paper is too bright for them. So im getting 635 red 5mW. So even if it accidently hits someone in the eye, their blink will cause damage not enough to blind them or damage permanently. Wow i actually typed that? I have no idea how i did it:confused:
That's a lot of lies hehe

5mW of green are the same power than 5mW of red, it's just brighter. They're going to get the same risk with 5mW of green than with 5mW of red, no matter what the wavelength is. And, as you're so concerned about safety, you'll see the green one faster than the red one, so you'll probably blink faster and in consequence, get a shorter exposure with a green one.

All in all, get a 5mW green pointer ;)
 




Top