Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

my new host for my LPC-826

australialaser

australialaser

0
Joined
Sep 10, 2011
Messages
140
Points
0
hey everyone today i got my new host in the mail box and here of some pics of what i got so far, it came with a heatsink as well and i have no idea how to wire it im so lost so i dont know what to do with this host

Picture006.jpg


Picture005.jpg


Picture004.jpg


Picture003.jpg


Picture002.jpg
 





australialaser

australialaser

0
Joined
Sep 10, 2011
Messages
140
Points
0
its from ebay its a very nice host, and ohh guys i managed to get everything wired up ;D it need batteries but i dont know what type and its working with a 405nm laser driver on a LPC diode i dont know if it will burn my diode but it works :)
 
Last edited:
skir0987

skir0987

0
Joined
Nov 26, 2011
Messages
86
Points
8
This host does look like it's designed for an 18650... that battery is 18mm in diameter, this host is 23mm in diameter so it would make sense that it would fit one. You can get 18650s cheap from deal extreme or similar, or look on ebay or websites like light hound. They're pretty common batteries.
 
laserhead2112

laserhead2112

0
Joined
Feb 26, 2011
Messages
191
Points
0
yeah I havethat same host in 405nm 18650 will just fine it also cr123 with the extension tube removed
 
Sigurthr

Sigurthr

0
Joined
Dec 11, 2011
Messages
4,364
Points
83
Oh nice, I love safety hosts (as long as they don't have that stupid nub connector switch)! Congrats on getting it all wired up, that is the hardest part!
 
skir0987

skir0987

0
Joined
Nov 26, 2011
Messages
86
Points
8
What kind of driver are you using? For a flex drive that's too much, for a linear driver like lm123 or similar that's what you need.
 
australialaser

australialaser

0
Joined
Sep 10, 2011
Messages
140
Points
0
Sigurthr said:
Oh nice, I love safety hosts (as long as they don't have that stupid nub connector switch)! Congrats on getting it all wired up, that is the hardest part!
Click to expand...

thanks man :) i dont still know if i wired up everything correctly but here is what i did: i soldered all the pins to the driver even not-used pin, then i got that little round heatsink sort of think and pressed my aixiz module in it NOT the long heatsink in the picture, then with the module i got it and pressed it in the front of the host, here is a pic if its to complicated
Picture001.jpg
and then i put danger sticker and put everything together
 
skir0987

skir0987

0
Joined
Nov 26, 2011
Messages
86
Points
8
Looks like a boost driver to me. You'll need 1 18650 or 1 cr123 (16340), two will be too much.
 
You must log in or register to reply here.





Top