pwnstar
0
- Joined
- Sep 12, 2007
- Messages
- 712
- Points
- 0
hey in closed post Gazoo posted
"The resistor is put in series with the diode. I would recommend a 2 ohm .5 watt resistor if you are going to be using a minimag with two cells. The electrolytic capacitor goes across the diode. The recommend value is a 47uf 16 volt capacitor. The capacitor will be marked with the negative side. The negative side of the capacitor gets soldered to the negative side of the diode, and the positive side of the capacitor to the positive side of the diode. "
(in place of a driver)
i went to my local radio shac and got a 47uf 35V as the closest i could find. for a resister i got a 2.2 ohm .5 watt as the closest i could find how would that affect my 16X dvd laser diode. im not sure if i should hook it up yet. im planing on hookin up to 2 AA's
will this change anything
"The resistor is put in series with the diode. I would recommend a 2 ohm .5 watt resistor if you are going to be using a minimag with two cells. The electrolytic capacitor goes across the diode. The recommend value is a 47uf 16 volt capacitor. The capacitor will be marked with the negative side. The negative side of the capacitor gets soldered to the negative side of the diode, and the positive side of the capacitor to the positive side of the diode. "
(in place of a driver)
i went to my local radio shac and got a 47uf 35V as the closest i could find. for a resister i got a 2.2 ohm .5 watt as the closest i could find how would that affect my 16X dvd laser diode. im not sure if i should hook it up yet. im planing on hookin up to 2 AA's
will this change anything