combining 2 reds into one

diachi · Mar 21, 2008

i was wondering, is there anyway i can combine 2 red lasers into one for my DIY burner (i was gonna have a week one that points out where the more powerful one is gonna go before i turn it on) can i do this using a mirror and partial reflection film without loosing too much power?

FireMyLaser · Mar 21, 2008

A better solution is to use two different currents to the diode. Low current for aiming, high for some burning.
Use the DDL driver and a switch to choose between two different resistor values.
Make sure that the switch can't conncet both resistors at ones.

diachi · Mar 21, 2008

yeah that makes more sense lol ill just put 2 switches on it, what resistance do u suggest, and can i power it from a mains adapter that has an output of 3VDC

FireMyLaser · Mar 21, 2008

For pointing I suggest maybe 50-100 ohms, just make sure that it's above lasing threshold. For burning it is up to you and/or what the diode can take. To power it you need at least 6v and good stabilized adapter and caps. Use a on-off-on or a on-on switch with three connections. Batteries is the best IMO.

diachi · Mar 21, 2008

just as well, it has variable output

and it can go to 6V

andy_con · Mar 21, 2008

http://www.laser-man.co.uk/2006/index.php?option=com_content&task=view&id=68&Itemid=66

Ace82 · Mar 21, 2008

I would like to try this with two 500mW lasers!

diachi · Mar 21, 2008

thanks lol

natabata · Mar 23, 2008

I think reds need at least 4.5v 3 would be too little

chido · Mar 23, 2008

Bluray diodes are the ones that use between 4.5v - 5v, red diodes use about 3v average.

combining 2 reds into one

diachi

0

Attachments

FireMyLaser

0

diachi

0

FireMyLaser

0

diachi

0

andy_con

0

Ace82

0

diachi

0

natabata

0

chido

0

Online statistics

Forum statistics

Share this page