Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Cheap 100mw 635nm laser?

Joined
Dec 29, 2013
Messages
63
Points
0
Does anyone know where I could get a 635nm 100mw laser in a 301 host? I live in USA and I have looked around and can't seem to fin anything
My budget is 40$ I have glasses of safety
 
Last edited:





Joined
Mar 29, 2013
Messages
1,221
Points
63
AFAIK you will not find a 100mw 635/638nm laser for under $40.

And, you are limiting yourself with your host choice.

You can find a 100mw 650nm laser though. Check o-like...

:beer:
-Matt
 

kilter

0
Joined
Jul 11, 2012
Messages
600
Points
28
try out laserbtb (skylasers) HL 635nm 660nm 50-300

It's a little bit over your budget but it will last a LOT longer than a crappy one :beer:

That's all I can recommend ;)

Edit: And FDA approval so it will NOT get taken away :)
 
Last edited:
Joined
Feb 21, 2013
Messages
5,013
Points
0
Dude, quit it!

This is your third thread asking pretty much the same question within 24 hours

http://laserpointerforums.com/f45/30-green-laser-usa-87257.html

http://laserpointerforums.com/f45/good-100-200mw-laser-87277.html

The word "cheap" and lasers DO NOT MIX! You need safety glasses for these lasers and FYI glasses for a 532nm DO NOT block 635-660nm light so you need TWO separate pairs of glasses, which means $90 shipped instead of the $45 shipped mentioned in your OTHER TWO question threads.

This is a forum, you are not the first person to ask these questions!!! Heard of a search box? USE IT! I was nice the first time you asked since you were new. I was nice the second time you asked since you are new, not so much the third time. ITS ANNOYING and its useless since these questions have been ANSWERED HUNDREDS OF TIMES SO QUIT IT AND SEARCH!

FYI that so "desired" 301 host you are looking for is a mass produced Chinese piece of crap, junk host with HORRIBLE heat sinking

Also the "i have safety glasses".......you sure they are proper safety glasses and not the junk ive mentioned? Are they rated for the red side of the spectrum? What is their OD rating, who tested them to get this rating since china can lie and say OD4 when they are really OD ZERO!
 
Last edited:
Joined
Dec 29, 2013
Messages
63
Points
0
Dude, quit it!

This is your third thread asking pretty much the same question within 24 hours

http://laserpointerforums.com/f45/30-green-laser-usa-87257.html

http://laserpointerforums.com/f45/good-100-200mw-laser-87277.html

The word "cheap" and lasers DO NOT MIX! You need safety glasses for these lasers and FYI glasses for a 532nm DO NOT block 635-660nm light so you need TWO separate pairs of glasses, which means $90 shipped instead of the $45 shipped mentioned in your OTHER TWO question threads.

This is a forum, you are not the first person to ask these questions!!! Heard of a search box? USE IT! I was nice the first time you asked since you were new. I was nice the second time you asked since you are new, not so much the third time. ITS ANNOYING and its useless since these questions have been ANSWERED HUNDREDS OF TIMES SO QUIT IT AND SEARCH!

FYI that so "desired" 301 host you are looking for is a mass produced Chinese piece of crap, junk host with HORRIBLE heat sinking

Also the "i have safety glasses".......you sure they are proper safety glasses and not the junk ive mentioned? Are they rated for the red side of the spectrum? What is their OD rating, who tested them to get this rating since china can lie and say OD4 when they are really OD ZERO!

Okay that is really rude and I have searched the forums secondly if it bothers YOU don't reply don't bother to post on the threads. I have feelings too and annoyance is something you need to ignore and not let yourself get frustrated with, I really want to know because you never know what might happen and when you get help from other people you find things faster
 
Joined
Sep 5, 2013
Messages
8,549
Points
113
Okay that is really rude and I have searched the forums secondly if it bothers YOU don't reply don't bother to post on the threads. I have feelings too and annoyance is something you need to ignore and not let yourself get frustrated with, I really want to know because you never know what might happen and when you get help from other people you find things faster

First of all,

Who do you think you are? Who are you? You only have 22 posts and so far have just been creating threads asking the same question. LivinLoud on the other hand, is a trusted and well respected member on these forums.

Also, please explain to me how LivinLoud was rude? I don't seem to see it.. All he is doing is trying to keep these forums spam free and clean.
Did he swear at you? No
Did he insult you? No
Did he threaten to hurt/ban/annoy you? No


Secondly,

This is a public forum, you created a thread for everyone on the internet to see, and if they wish, are allowed to respond. You cannot tell people "they aren't allowed" to post on this thread unless, you are in a position of power(moderator/owner of these forums)

Thirdly and finally,

You must not have looked very hard since I spend many hours during my weekend looking at random threads(I was bored :p) and I have seen countless 635nm 100mW threads in which the users reviewed them and/or asked where to purchase one etc...

:wtf:
 
Last edited:
Joined
Dec 29, 2013
Messages
63
Points
0
First of all,

Who do you think you are? Who are you? You only have 22 posts and so far have just been creating threads asking the same question. LivinLoud on the other hand, is a trusted and well respected member on these forums.

Also, please explain to me how LivinLoud was rude? I don't seem to see it.. All he is doing is trying to keep these forums spam free and clean.
Did he swear at you? No
Did he insult you? No
Did he threaten to hurt/ban/annoy you? No


Secondly,

This is a public forum, you created a thread for everyone on the internet to see, and if they wish to respond to. You cannot tell people "they aren't allowed" to post on this thread unless, you are in a position of power(moderator/owner of these forums)

Thirdly and finally,

You must not have looked very hard since I spend many hours during my weekend looking at random threads and I have seen countless 635nm 100mW threads in which the users reviewed them, asked where to purchase one etc...

:wtf:

I didn't tell him he "couldn't post on the thread" I just said if it bothers him why post at all just ignore it
 
Joined
Dec 29, 2013
Messages
63
Points
0
AFAIK you will not find a 100mw 635/638nm laser for under $40.

And, you are limiting yourself with your host choice.

You can find a 100mw 650nm laser though. Check o-like...

:beer:
-Matt

Thanks I will search the forums better now
 
Joined
Sep 5, 2013
Messages
8,549
Points
113
I didn't tell him he "couldn't post on the thread" I just said if it bothers him why post at all just ignore it

It dosen't bother him to post on the thread. He is just warning you to stop posting thread after thread asking the same question.

Your question was already answered(as said before) on your first thread, what was the point of creating 2 new threads?
 
Joined
Feb 21, 2013
Messages
5,013
Points
0
There is a pink link in my signature on how to search this forum. There are TWO, yes two, search features on this site and id be willing to bet you used the one on the top of the site called "Search".........Yup, knew it ;)

You'd be using the wrong search function, that one is like using a foreign encyclopedia to find information, its all jumbled and might get you the right info but probably not. See the thing two to the right of it, "LPF Search" click that, it brings you to the bottom of the page and there is a "google" looking search bar, use that. its 100x better for searching and if you search the right things, you will always get your answer :beer:

EDIT: As greenlander has said, it doesnt bother me one bit, yes its a little annoying but if anything its a PSA to you. If you continue to do it then the mods will ban you. I've seen it done hundreds of times before. BAN = NO information ever so in the end you'll thank me ;)
 
Last edited:
Joined
Dec 29, 2013
Messages
63
Points
0
There is a pink link in my signature on how to search this forum. There are TWO, yes two, search features on this site and id be willing to bet you used the one on the top of the site called "Search".........Yup, knew it ;)

You'd be using the wrong search function, that one is like using a foreign encyclopedia to find information, its all jumbled and might get you the right info but probably not. See the thing two to the right of it, "LPF Search" click that, it brings you to the bottom of the page and there is a "google" looking search bar, use that. its 100x better for searching and if you search the right things, you will always get your answer :beer:

EDIT: As greenlander has said, it doesnt bother me one bit, yes its a little annoying but if anything its a PSA to you. If you continue to do it then the mods will ban you. I've seen it done hundreds of times before. BAN = NO information ever so in the end you'll thank me ;)

Okay guys I'm sorry to cause so much trouble
 
Joined
Feb 21, 2013
Messages
5,013
Points
0
Again, not causing trouble, just trying to help out. Greenlander and Tmack (if he see's this) will both tell you that I am a VERY helpful guy. Helped both of them out when they were new. I think you might be taking my "tone of text" wrong but yes its a little bit of "tough love"
 
Joined
Dec 29, 2013
Messages
63
Points
0
Again, not causing trouble, just trying to help out. Greenlander and Tmack (if he see's this) will both tell you that I am a VERY helpful guy. Helped both of them out when they were new. I think you might be taking my "tone of text" wrong but yes its a little bit of "tough love"

Okay man thanks
 
Joined
Dec 8, 2013
Messages
47
Points
0
Again, not causing trouble, just trying to help out. Greenlander and Tmack (if he see's this) will both tell you that I am a VERY helpful guy. Helped both of them out when they were new. I think you might be taking my "tone of text" wrong but yes its a little bit of "tough love"

a little tough love never hurt anybody and i too am pretty new to the forum and Livinloud is still helping me out :thanks: and Werty hope you find what you are looking for:beer:
 

Tmack

0
Joined
Oct 13, 2013
Messages
2,478
Points
0
Don't mind livinloud he's a jerk...........ahhhhhh syke buddy!!!! No livinloud was the first guy I ever talked to hear. He welcomed me and showed me the ropes. I am very grateful for his help. Now look!!! Tmack is selling to the ( soon to be) vet!!!!! Haha. Livinloud is one of my good friends here and I assure you he means no harm. If he bothers you again ill have to go and punch him in the right side of his neck. No worries.
 




Top