Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Caravela Mitts Mod 1.4a Flex

badboybilly

badboybilly

0
Joined
Mar 5, 2015
Messages
1,336
Points
113
Here's a nice simple Mec mod conversion that does 1.2w and has changeable
Barrels for a 18650 or a 18350

Aluminium heat sink was pressed in with a vice very tight.

The Flexdrive V5 was set to 1.4a and with thermal adhesive heat sinked to the inside of the sink

Very simple build, I'm waiting on more G2s so the 2 element glass red lens has a bit of splash. With the 3 element to much power loss and still not that great.

I really like them long brass lasers like Sanwu and others so I had to build one.

Nowhere near as high quality but it will do.

my calibrated tec based LPM shows 1.22w on a full charge.

Hope the pics come out ok some just won't stay at 800-600 they change to
450-600 I've tried many different apps.

Thanks for looking!
 

Attachments

  • 1459271924.6632.jpg
    1459271924.6632.jpg
    301.7 KB · Views: 113
  • 1459271980.6412.jpg
    1459271980.6412.jpg
    345.2 KB · Views: 103
  • 1459272031.0379.jpg
    1459272031.0379.jpg
    154.2 KB · Views: 121
  • 1459272079.0874.jpg
    1459272079.0874.jpg
    169.6 KB · Views: 109
  • 1459272146.48.jpg
    1459272146.48.jpg
    296.2 KB · Views: 111
  • 1459272202.0755.jpg
    1459272202.0755.jpg
    287.3 KB · Views: 111
  • 1459272251.4597.jpg
    1459272251.4597.jpg
    258.3 KB · Views: 108
  • 1459272334.3279.jpg
    1459272334.3279.jpg
    232.4 KB · Views: 115





badboybilly

badboybilly

0
Joined
Mar 5, 2015
Messages
1,336
Points
113
Some more pics bros
 

Attachments

  • 1459272493.3562.jpg
    1459272493.3562.jpg
    259.8 KB · Views: 92
  • 1459272542.4497.jpg
    1459272542.4497.jpg
    181 KB · Views: 82
  • 1459272596.3223.jpg
    1459272596.3223.jpg
    195.1 KB · Views: 88
  • 1459272649.117.jpg
    1459272649.117.jpg
    188.3 KB · Views: 91
  • 1459272702.554.jpg
    1459272702.554.jpg
    172.4 KB · Views: 99
  • 1459272758.6362.jpg
    1459272758.6362.jpg
    172 KB · Views: 78
  • 1459272801.6339.jpg
    1459272801.6339.jpg
    170.9 KB · Views: 96
  • 1459272842.7306.jpg
    1459272842.7306.jpg
    183.2 KB · Views: 94
badboybilly

badboybilly

0
Joined
Mar 5, 2015
Messages
1,336
Points
113
And a few more beam shots!
 

Attachments

  • 1459272952.0251.jpg
    1459272952.0251.jpg
    221.8 KB · Views: 77
  • 1459273041.2938.jpg
    1459273041.2938.jpg
    253.7 KB · Views: 82
  • 1459273073.8553.jpg
    1459273073.8553.jpg
    173 KB · Views: 77
  • 1459273143.0706.jpg
    1459273143.0706.jpg
    150.2 KB · Views: 70
paul1598419

paul1598419

0
Joined
Sep 20, 2013
Messages
17,426
Points
113
Nice effort. Are you sure about the LPM? How did you calibrate it? + rep.
 
badboybilly

badboybilly

0
Joined
Mar 5, 2015
Messages
1,336
Points
113
Yes mate I'm sure that's normal for 1.4a I have another with a AMC driver at 1.4a and that is also 1.22, I have a tec based LPM calibrated with a PLTB520b1 that Jordan LPMd for me before shipping, check out my $80 LPM build!

Do the photos not show how powerful that beam is!

My coating on my Tec might not be 100% linear for green and for red, but I'm posting my build results, not competing with most powerful Mitts!
Thanks for checking it out though!

I just noticed you said this in another thread, is it that hard to believe!

Posted By paul1598419
Re: Sanwu Spiker Series lasers: 1 Watt 520nm and 638nm

Very nice review. Are you sure about the current draw on the 635nm laser? At 1 watt, it should be drawing at least 1.2 amps. I'm curious how you determined current with a multi-meter while the...
 
Last edited:
paul1598419

paul1598419

0
Joined
Sep 20, 2013
Messages
17,426
Points
113
No, I have a 635nm 1+ watt myself. I was just not used to seeing these meter out above 1.1 watts. Did you use a Mits or an Oclaro diode? If Jordan did the calibration, I'm sure it's as accurate as it can be with the coating you have on it.
 
paul1598419

paul1598419

0
Joined
Sep 20, 2013
Messages
17,426
Points
113
Oh. How embarrassing. It's a Mitsubishi. Yeah, just haven't seen these output above 1.1 watts, but I never did run one up until it died. They are cheap now, but a couple years ago they were twice as much. I haven't bought any since then.
 
badboybilly

badboybilly

0
Joined
Mar 5, 2015
Messages
1,336
Points
113
Actually both mitts I have arnt new builds they have been going strong for 10 months now. If you do a search you will find many doing 1.2w and over mate!
 
Lifetime17

Lifetime17

0
Joined
Dec 15, 2014
Messages
6,782
Points
113
Hi BBB,Great build like the mod with a Mitsu i also have a few builds with the Mitsu and they to are over 1W . Hey what species is your parrot? I have a yellow naped Amazon
 
badboybilly

badboybilly

0
Joined
Mar 5, 2015
Messages
1,336
Points
113
Lifetime17 said:
Hi BBB,Great build like the mod with a Mitsu i also have a few builds with the Mitsu and they to are over 1W . Hey what species is your parrot? I have a yellow naped Amazon
Click to expand...

Hi buddy

Leon my bird is a musk Lori, Here he is freaking out at the vet, just recently started talking, cum here, get out, don't come back, 3 of his favourite sayings!
 

Attachments

  • 1494595312.9169.jpg
    1494595312.9169.jpg
    303.6 KB · Views: 74
  • 1494596639.2493.jpg
    1494596639.2493.jpg
    278.3 KB · Views: 76
Last edited:
jnrpop

jnrpop

0
Joined
Dec 7, 2008
Messages
723
Points
63
Awesome build!
Did the pill come with the Mod? Battery spring and all?
And what did your heatsink measure out to be, 20mmDiameter?
Cheers for the post!
 
badboybilly

badboybilly

0
Joined
Mar 5, 2015
Messages
1,336
Points
113
No only extension tube comes with the Caravela, when I did this build I didn't have a lathe so the alloy heatsink was reduced on the drill press to fit tight, the pill was just some tube part with thread I had laying around that fit nicely, very simple build!
 
trinh hong phuoc

trinh hong phuoc

0
Joined
May 12, 2017
Messages
961
Points
93
badboybilly said:
Yes mate I'm sure that's normal for 1.4a I have another with a AMC driver at 1.4a and that is also 1.22, I have a tec based LPM calibrated with a PLTB520b1 that Jordan LPMd for me before shipping, check out my $80 LPM build!

Do the photos not show how powerful that beam is!

My coating on my Tec might not be 100% linear for green and for red, but I'm posting my build results, not competing with most powerful Mitts!
Thanks for checking it out though!

I just noticed you said this in another thread, is it that hard to believe!

Posted By paul1598419
Re: Sanwu Spiker Series lasers: 1 Watt 520nm and 638nm

Very nice review. Are you sure about the current draw on the 635nm laser? At 1 watt, it should be drawing at least 1.2 amps. I'm curious how you determined current with a multi-meter while the...
Click to expand...


I used a 5-mode amc7135 driver- and I killed a 500mw misu diode after 5 minutes -I do not understand why, can you explain me?
The current I give it is 1.2a-4 pcs
Amc 7135-5 mode
 
You must log in or register to reply here.




Top