- Joined
- Aug 19, 2013
- Messages
- 82
- Points
- 8
Nope. I got lots of stuff to do still anyhow.
LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
c-mount LUZY laser pistol
- Thread starter jimmyoneeye
- Start date
- Joined
- Aug 19, 2013
- Messages
- 82
- Points
- 8
The beautiful golden diode of legend and the no2 cartridges arrived other day! The no2 is nice and cold and I have been busy. I wired the drives and switches. I made a battery retainer latch. I cut the frame so the receiver tube can come straight out of the top instead of sliding out. This makes it much easier and faster to disassemble at the cost of a little beauty. I also cut the rear of the bottom of the front sight to allow the lens tube to be removed without removing the button guard.
I must admit I am nervous about drilling the diode placement hole. I am more of a sculptor than a technician or machinist. :undecided: I'm going to borrow a mill vise.
I must admit I am nervous about drilling the diode placement hole. I am more of a sculptor than a technician or machinist. :undecided: I'm going to borrow a mill vise.
Last edited:
- Joined
- Jan 2, 2008
- Messages
- 1,513
- Points
- 83
where did you come up with Luzy?
BTW, My wifes name is Luz. Just had to look.
BTW, My wifes name is Luz. Just had to look.
- Joined
- Aug 19, 2013
- Messages
- 82
- Points
- 8
Simple, just, laser + Uzi = luzy 
benmwv
0
- Joined
- Sep 10, 2010
- Messages
- 1,380
- Points
- 48
If I had to guess Id say its laser + uzi. Edit: Im a little late
Really like you idea for the cooling system! I'm just wondering how long it will last. Are you putting in a needle valve to control the gas flow?
Really like you idea for the cooling system! I'm just wondering how long it will last. Are you putting in a needle valve to control the gas flow?
Last edited:
- Joined
- Aug 19, 2013
- Messages
- 82
- Points
- 8
The cracker itself is a rudimentary needle valve. By turning the rear sight you open and close the valve. I'm still trying some methods to restrict the flow of gas. I put a bead chain in the hose and it restricted the gas beautifully until I opened it too fast and it shot out like a string pellet gun! Still ironing this out. There was nothing obstructing the departure of the beads... I was just seeing how cold it would get. It was surprising. the cracker itself gets very cold and is screwed and thermal pasted directly to the heat sink.
I also just had the idea of reusing the old cartridges by filling them up with freezer pack jell. Trying them out as tiny micro coolers. It could work, but I don't want it to get too cold. And I would be sad about not getting to spray gas.
Still ironing this out. There was nothing obstructing the departure of the beads... I was just seeing how cold it would get. It was surprising. the cracker itself gets very cold and is screwed and thermal pasted directly to the heat sink.I also just had the idea of reusing the old cartridges by filling them up with freezer pack jell. Trying them out as tiny micro coolers. It could work, but I don't want it to get too cold. And I would be sad about not getting to spray gas.
Last edited:
jayrob
0
- Joined
- Sep 21, 2007
- Messages
- 9,862
- Points
- 113
Man that's a really trick build!
Love the look of it!
Love the look of it!
bdgreenb
0
- Joined
- Jul 20, 2011
- Messages
- 723
- Points
- 28
Can't wait to see you fire it up! The host is way too sexy to not spray photons all over the upper atmosphere (sans aircraft, including space shuttles at this point ) make those votes happy!!!
) make those votes happy!!!
Last edited:
- Joined
- Aug 19, 2013
- Messages
- 82
- Points
- 8
Thanks bdgreenb! Jayrob I wouldn't even know what a module was if I hadn't started reading your posts here in 2009. And you also more rescently introduced me to c-mount diodes, I would not have been able to build this without you. Thanks for showing me the light.
MessiTom
0
- Joined
- Jul 19, 2013
- Messages
- 207
- Points
- 0
Yea this is in fact a pretty darn cool build. :beer:
- Joined
- Aug 19, 2013
- Messages
- 82
- Points
- 8
I suddenly find myself worried about satalites space shuttles astronauts and aliens. I do not want to start a frickin laser fight with the government or aliens! I imagine I would loose badly. :tinfoil:
jayrob
0
- Joined
- Sep 21, 2007
- Messages
- 9,862
- Points
- 113
Thanks bdgreenb! Jayrob I wouldn't even know what a module was if I hadn't started reading your posts here in 2009. And you also more rescently introduced me to c-mount diodes, I would not have been able to build this without you. Thanks for showing me the light.
I will gracioushly accept this build... Thank you! (jk)
Seriously, one of the coolest mods I've seen...
- Joined
- Mar 29, 2013
- Messages
- 1,221
- Points
- 63
Why are you such a genius?
+1
+1
LKY2009
0
- Joined
- Oct 3, 2010
- Messages
- 75
- Points
- 8
A Real Laser Gun! Wow. Excellent workmanship.
+1 Rep
+1 Rep
- Joined
- Aug 19, 2013
- Messages
- 82
- Points
- 8
Hey everybody! :wave:
I apologize, I have been busy with boring, normal, non-laser related things.
I have spent a very dramatic week staring at the final four leads protruding from the power supply box and the receiver tube like a gang of angry red and black snakes.
My hesitation paid off! My wise uncle, overlooking my project, Shouted "Faf!" pointed at my thermometer and said "That is bi-metal, and therefore it is crap! you must use thermal adhesive strips!" I have demurred to his greater wisdom, being an industrialist of some note. I have acquired and incorporated a thermal adhesive strip, directly above the heat sink. This allows me to forgo drilling a thermometer hole through the heat-sink, granting a better, more natural view of the readout, While avoiding a large ugly protruding dial of questionable accuracy.
Now the leads are soldered, the snakes have been twisted and joined in and endless kiss.
all that is left is test, and lens adjustment, and test and lens adjustment...
I apologize, I have been busy with boring, normal, non-laser related things.
I have spent a very dramatic week staring at the final four leads protruding from the power supply box and the receiver tube like a gang of angry red and black snakes.
My hesitation paid off! My wise uncle, overlooking my project, Shouted "Faf!" pointed at my thermometer and said "That is bi-metal, and therefore it is crap! you must use thermal adhesive strips!" I have demurred to his greater wisdom, being an industrialist of some note. I have acquired and incorporated a thermal adhesive strip, directly above the heat sink. This allows me to forgo drilling a thermometer hole through the heat-sink, granting a better, more natural view of the readout, While avoiding a large ugly protruding dial of questionable accuracy.
Now the leads are soldered, the snakes have been twisted and joined in and endless kiss.
all that is left is test, and lens adjustment, and test and lens adjustment...
Last edited:
Javalin
0
- Joined
- Aug 22, 2013
- Messages
- 370
- Points
- 43
op: Subbing
