kiyoukan
0
- Joined
- Oct 24, 2009
- Messages
- 2,555
- Points
- 48
It is no longer a flash light.
A beam with around 3.65mm wide by 2mm with around 1 to 1.1 Mrad
give or take .6mm
powers from 600mw very under driven up to 1.2W over driven with the 300mw mitsu diodes.
With the 500mw diodes the same optics can be used and powers much great can be gotten.
With no splash or wings a good pure laser beam.
My current setup with custom optics.
The reason for the border is the whole thing will be covered by this
The bottom will be cut out and where the holes are in the plate will be the only parts left on the enclosure to secure it.
If any of you have seen my you tube channel you have seen my results with my current set of lenses.
http://www.youtube.com/user/kiyoukan1
The build takes advantage that my optics work differently that Drlavas.
His uses one concave and one convex lens.
Mine use two convex lenses.
So there is a point when the beams come together in a very small point
See very bad drawing.
This allows you to use a FS mirror to get the beams super close.
There will be alot of pictures to come.
Now for my setup i am using a 6X c lens setup.
The lenses are very easy to work with so easy they are faster to setup than prisms.
The reason why is the fact that they are large and as such getting the diode on the center of them is very easy and even if you are not on the center you wont lose any power.
I am getting optics made but wont be able to get a full price quote till the first of the month due to the china holiday.
But if you guys want to see them
These are the diode lens.
There is a 2mm efl and a 2.75efl lens
The ones i have coming from dave are 2mm efl
I decided to buy a set due to the production time will take a few weeks and i dont want to wait.
This next picture is my custom Cylindrical lenses.
If you are interested in getting some optics to make and correct a 635nm diode let me know.
To get good prices on lenses we will need to order at least 50 of them.
Important price info
Price for 2 cylindrical lenses will be from 30 to 35$
Price for diode lens is 40$ (order from dave at LSP once mine get made price will be lower)
So for a full set will cost 70 to 75$
For a dual diode setup will only cost the price of another diode lens plus 10$ as i can cut these lenses in half and you can use that for each diode
A beam with around 3.65mm wide by 2mm with around 1 to 1.1 Mrad
give or take .6mm
powers from 600mw very under driven up to 1.2W over driven with the 300mw mitsu diodes.
With the 500mw diodes the same optics can be used and powers much great can be gotten.
With no splash or wings a good pure laser beam.
My current setup with custom optics.
The reason for the border is the whole thing will be covered by this
The bottom will be cut out and where the holes are in the plate will be the only parts left on the enclosure to secure it.
If any of you have seen my you tube channel you have seen my results with my current set of lenses.
http://www.youtube.com/user/kiyoukan1
The build takes advantage that my optics work differently that Drlavas.
His uses one concave and one convex lens.
Mine use two convex lenses.
So there is a point when the beams come together in a very small point
See very bad drawing.
This allows you to use a FS mirror to get the beams super close.
There will be alot of pictures to come.
Now for my setup i am using a 6X c lens setup.
The lenses are very easy to work with so easy they are faster to setup than prisms.
The reason why is the fact that they are large and as such getting the diode on the center of them is very easy and even if you are not on the center you wont lose any power.
I am getting optics made but wont be able to get a full price quote till the first of the month due to the china holiday.
But if you guys want to see them
These are the diode lens.
There is a 2mm efl and a 2.75efl lens
The ones i have coming from dave are 2mm efl
I decided to buy a set due to the production time will take a few weeks and i dont want to wait.
This next picture is my custom Cylindrical lenses.
If you are interested in getting some optics to make and correct a 635nm diode let me know.
To get good prices on lenses we will need to order at least 50 of them.
Important price info
Price for 2 cylindrical lenses will be from 30 to 35$
Price for diode lens is 40$ (order from dave at LSP once mine get made price will be lower)
So for a full set will cost 70 to 75$
For a dual diode setup will only cost the price of another diode lens plus 10$ as i can cut these lenses in half and you can use that for each diode
Last edited:
