conical focus adapter vs foucusing rings - Page 2

Machinist Joe · 04-29-2012, 08:36 PM

"I'm not going to waste my time" = I can't think of any other BS excuse

RyanElectro · 04-29-2012, 08:41 PM

Quote:

Originally Posted by Machinist Joe

"I'm not going to waste my time" = I can't think of any other BS excuse

What excuses? I ain't excusing, I'm still here.

Quote:

Originally Posted by Machinist Joe

Ok, so going back over this, what makes building a 2W laser any different then building a 2.5W laser?

Everyone can build a 2W laser, but not everyone can build a 2.5W laser (assuming 1.8A current limit). I'm one of the few who has done it.

Do it yourself and by the time you find one that efficient, let's see if you still want to sell one at $225 like Jake is suggesting looool.

jakeGT · 04-29-2012, 08:47 PM

I said something that cost me $150 in parts an less than an hour of build time because besides sinking the driver what else did you do in that build that is so special? Put batteries in it and put the diode in the heat sink/ set screw it in? Damn son that must have taken hours.

Seriously I would love to know what you did worth that $225 profit for something we all know took less than 1 hour of ur time to build.

RyanElectro · 04-29-2012, 08:52 PM

Quote:

Originally Posted by jakeGT

I said something that cost me $150 in parts an less than an hour of build time because besides sinking the driver what else did you do in that build that is so special? Put batteries in it and put the diode in the heat sink/ set screw it in? Damn son that must have taken hours.

Seriously I would love to know what you did worth that $225 profit for something we all know took less than 1 hour of ur time to build.

Nope, it took 4-6 hours in this particular build. Not everybody slaps parts together like you and call it a build. I am slow but meticulous, and every build I make sure is perfect.

Buy one and find out yourself

Machinist Joe · 04-29-2012, 08:54 PM

Quote:

Originally Posted by RyanElectro

Everyone can build a 2W laser, but not everyone can build a 2.5W laser (assuming 1.8A current limit). I'm one of the few who has done it.

Do it yourself and by the time you find one that efficient, let's see if you still want to sell one at $225 like Jake is suggesting looool.

If somebody can build a 2W laser, then they can build a 2.5W laser. Just as long as they get an efficient diode. I don't see how this makes you so special?

RyanElectro · 04-29-2012, 08:58 PM

Quote:

Originally Posted by Machinist Joe

If somebody can build a 2W laser, then they can build a 2.5W laser. Just as long as they get an efficient diode. I don't see how this makes you so special?

No they can't, because they don't have the diode. I sell the laser as it's worth, not its cost, my friend.

You can learn how to make a 2.5W laser for years and still not be able to make one. The fact is I CAN make one, realistically. Not in theory.

Again, I challenge you, if you think it's not special, then do it yourself.

ARGLaser · 04-29-2012, 08:59 PM

Quote:

Originally Posted by RyanElectro

I'm not wasting my time to explain to you every little thing I do to my builds. But all I'm saying is that I sell my builds at what they're worth based on the market, this ultra-rare 2.5W diode is worth loads and you think I'll just let it go for $150? With the hours I spent and the effort I put it? You're a joke.

They aren't that rare. Lots of people have gotten high efficiency M140 diodes...

RyanElectro · 04-29-2012, 09:01 PM

Quote:

Originally Posted by ARGLaser

They aren't that rare. Lots of people have gotten high efficiency M140 diodes...

Then build one. Stop talking, do it. 2W's are high efficiency and becoming common. 2.5W, no my friend, that is INCREDIBLY rare.

bennett326 · 04-29-2012, 09:01 PM

Quote:

Originally Posted by RyanElectro

Then by all means, in these 2 years you've been on this forum, never created 1 build near 2.5W? Out of how many sellers/builders have build a laser of this magnitude on this entire forum in its entire lifetime? I can name about 2 other single-diode builds.

Again dude if you think you're so good, go build one 2.5W and over in your Maglite LOL. Let's see it bro, less talk, more action.

Kid? I'm the same age as you, ignoramus

YOU need to be set straight:
1) You started the trolling/rudeness in this thread
2) On top of this, you're absolutely WRONG in this thread and
3) After all this, you're still pumping your pride to satisfy your inferiority complex

oh wow you joined right after the highly efficient diodes were sourced. tell me how you are the only one that can make solder joins please do.

you do not know shit you come here fuck up 3 builds and a few weeks later say you are a expert get of your high horse.

you do not do anything you buy a kit and solder together i can do that my grandma can do that my 8 year old cousin can do that. go away

there are infinitely many people here with more knowledge on lasers than you. including jake bobhaha and bionicbadger. do everyone a favor and go rip people of on ebay and stop turning all these threads to sh!t.

thanks

RyanElectro · 04-29-2012, 09:04 PM

Quote:

Originally Posted by bennett326

oh wow you joined right after the highly efficient diodes were sourced. tell me how you are the only one that can make solder joins please do.

you do not know shit you come here fuck up 3 builds and a few weeks later say you are a expert get of your high horse.

you do not do anything you buy a kit and solder together i can do that my grandma can do that my 8 year old cousin can do that. go away

there are infinitely many people here with more knowledge on lasers than you. including jake bobhaha and bionicbadger. do everyone a favor and go rip people of on ebay and stop turning all these threads to shit.

thanks

I'm not an expert, but my builds ARE top quality. And why are you against me when I'm not wrong here. Jake was the one started trolling me on this thread when he was wrong, now you're blaming me for this thread's demise?

It's all just a cult of ppl siding whoever has more rep. Sad. I don't even care who has more rep: whoever is right is right, and wrong, wrong.

Jake was wrong: focusing adapters DO provide better heatsinking.

Last time I checked this forum was for science, not politics.

Now stfu, just another rep rider.

bennett326 · 04-29-2012, 09:05 PM

Quote:

Originally Posted by RyanElectro

No they can't, because they don't have the diode. I sell the laser as it's worth, not its cost, my friend.

You can learn how to make a 2.5W laser for years and still not be able to make one. The fact is I CAN make one, realistically. Not in theory.

Again, I challenge you, if you think it's not special, then do it yourself.

anyone could if they had money to spare go build a scanner like i did i bet you wont i bet you dont have the skills. and guess what you wont try to prove me wrong because you are busy spending money to rip people off and not on trying to prove me wrong

no one is standing with you you are not special you are another stuck up kid who wants to make some money

yes i double posted and i dont care because of how fucking retarded you are

bennett326 · 04-29-2012, 09:07 PM

Quote:

Originally Posted by RyanElectro

I'm not an expert, but my builds ARE top quality. And why are you against me when I'm not wrong here. Jake was the one started trolling me on this thread when he was wrong, now you're blaming me for this thread's demise?

It's all just a cult of ppl siding whoever has more rep. Sad. I don't even care who has more rep: whoever is right is right, and wrong, wrong.

Jake was wrong: focusing adapters DO provide better heatsinking.

Last time I checked this forum was for science, not politics.

Now stfu, just another rep rider.

really unless the focus adapter is touching the heatsink it wont help so you were both right. another rep rider? who the fuck do you think you are example: EF has 300+ rep i spent multiple pages in a thread arguing with him. so no i did not side with him because he has more rep i sided with him because you are an arrogant a44hole

ARGLaser · 04-29-2012, 09:09 PM

Quote:

Originally Posted by RyanElectro

Then build one. Stop talking, do it. 2W's are high efficiency and becoming common. 2.5W, no my friend, that is INCREDIBLY rare.

What are you talking about? No they are not. SUPER FREAK "445nm diode"
SUPER FREAK "445nm diode"
http://laserpointerforums.com/f52/rh...iew-72241.html

All you have to do is buy a bunch of diodes and bin them for efficiency. It's not hard. I'm sure there are a few diodes in each projector that have high efficiency.

rpaloalto · 04-29-2012, 09:09 PM

Ryan your going to make a lot of enemies around here. You think your a big shot and dont know how to stay out of trouble. I have a feeling your days are numbered here at LPF.

AND WHY IS IT YOUR CONCERN WHO I GIVE PLUS REP TO IN THIS THREAD. PLEASE DONT SEND ME ANOTHER PM ASKING WHY I GAVE MACHINIST JOE + REP

RyanElectro · 04-29-2012, 09:09 PM

Quote:

Originally Posted by bennett326

really unless the focus adapter is touching the heatsink it wont help so you were both right. another rep rider? who the fuck do you think you are example: EF has 300+ rep i spent multiple pages in a thread arguing with him. so no i did not side with him because he has more rep i sided with him because you are an arrogant asshole

The focus adapter IS touching the heatsink idiot.

Even if it doesn't it will still wick away heat transferred from module -> lens barrel -> adapter

Quote:

Originally Posted by ARGLaser

What are you talking about? No they are not. SUPER FREAK "445nm diode"
SUPER FREAK "445nm diode"
http://laserpointerforums.com/f52/rh...iew-72241.html

All you have to do is buy a bunch of diodes and bin them for efficiency. It's not hard. I'm sure there are a few diodes in each projector that have high efficiency.

Yeah out of how many builds can attain that? You KNOW they are very rare. No one needs to tell you this.

Quote:

Originally Posted by rpaloalto

Ryan your going to make a lot of enemies around here. You think your a big shot and dont know how to stay out of trouble. I have feeling your days are numbered here at LPF.

I don't think I am the big shot AT ALL, but I'm not afraid to stand up for myself. I've dealt with bullies before, and you guys can push me around all you want, but I will stand up every time.

Those who are kind to me, give me sound advice, I heed their advice and I listen to them. Most of you guys here just want to troll.

bennett326 · 04-29-2012, 09:12 PM

Quote:

Originally Posted by RyanElectro

The focus adapter IS touching the heatsink idiot.

Even if it doesn't it will still wick away heat transferred from module -> lens barrel -> adapter

ok IDIOT really wanna see one of my builds ? WELL IT F

CKING DOESNT touch you arrogant little sh!t. you are making a ton of enemies and FAST with you a$$hole attitude. and trust me no one will be recomending your builds if you act like this.

Machinist Joe · 04-29-2012, 09:14 PM

I lol'd then looked at my rep page. Ryan, why you on my rep page? Lol

Quote:

Originally Posted by rpaloalto

Ryan your going to make a lot of enemies around here. You think your a big shot and dont know how to stay out of trouble. I have feeling your days are numbered here at LPF.

AND WHY IS IT YOUR CONCERN WHO I GIVE PLUS REP TO IN THIS THREAD. PLEASE DONT SEND ME ANOTHER PM ASKING WHY I GAVE MACHINIST JOE + REP

ARGLaser · 04-29-2012, 09:14 PM

Quote:

Originally Posted by RyanElectro

Yeah out of how many builds can attain that? You KNOW they are very rare. No one needs to tell you this.

They are uncommon, yes. You make it sound like they are one in a million though, and that you're the king of the world for having one. There is no need to be so arrogant.

Machinist Joe · 04-29-2012, 09:16 PM

RyanElectro neg reps me saying "you fail to get the point" Obviously it is you that doesn't get the point Ryan, because everybody here disagrees with you, and is on my side.

RyanElectro · 04-29-2012, 09:18 PM

Quote:

Originally Posted by bennett326

ok IDIOT really wanna see one of my builds ? WELL IT FUCKING DOESNT touch you arrogant little shit. you are making a ton of enemies and FAST with you asshole attitude. and trust me no one will be recomending your builds if you act like this.

It does. You're probably using a 3-element.

Quote:

Originally Posted by ARGLaser

They are uncommon, yes. You make it sound like they are one in a million though, and that you're the king of the world for having one. There is no need to be so arrogant.

I'm no king, far from it. But yes I do have them, do you?

Quote:

Originally Posted by Machinist Joe

RyanElectro neg reps me saying "you fail to get the point" Obviously it is you that doesn't get the point Ryan, because everybody here disagrees with you, and is on my side.

You fail to understand, I'm not excusing myself, and twas not a "BS excuse". I'm not appreciated, I don't think it is appropriate I give you tips and advice for nothing.

bennett326 · 04-29-2012, 09:20 PM

Quote:

Originally Posted by Machinist Joe

RyanElectro neg reps me saying "you fail to get the point" Obviously it is you that doesn't get the point Ryan, because everybody here disagrees with you, and is on my side.

he is neg repping everyone dont worry i fixed it

joe you are going to do well here

ryan not everyone uses the same thing or the same god damn focus adapter grow up get off your high horse and stop being a douche bag pretty soon your fs threads will be trashed with your attitude i and most others would never recommend you let alone your astronomical prices

Machinist Joe · 04-29-2012, 09:23 PM

Thanks bennett!

If I ever sell lasers here, I will sell them at the right price, not 200%+ markup like somebody else here

RyanElectro · 04-29-2012, 09:23 PM

I neg repped you for absolute rudeness and yes you are clearly just siding your friends.

I'm not a child, I don't need to call my "buddies" to this thread to get them to post.

bennett326 · 04-29-2012, 09:23 PM

Quote:

Originally Posted by RyanElectro

I neg repped you for absolute rudeness and yes you are clearly just siding your friends.

I'm not a child, I don't need to call my "buddies" to this thread to get them to post.

and in what way are you not being rude enlighten me if your so smart

Machinist Joe · 04-29-2012, 09:26 PM

So if you neg repped him for being rude, why did you neg rep me? Cause I'm telling you that you're wrong? lol

BTW I just wanted to say thanks for the good laugh. I'm finding all of this quite humorous.

WAIT, and you neg repped ARG. Ahahaha wow. What was that for?

04-29-2012, 08:36 PM	#26
Machinist Joe Class 2 Laser Join Date: Jan 2012 Posts: 456 Rep Power: 14	Re: conical focus adapter vs foucusing rings "I'm not going to waste my time" = I can't think of any other BS excuse

04-29-2012, 08:47 PM	#28
jakeGT Class 3B Laser Join Date: Oct 2010 Location: Kentucky Posts: 3,548 Rep Power: 173	Re: conical focus adapter vs foucusing rings I said something that cost me $150 in parts an less than an hour of build time because besides sinking the driver what else did you do in that build that is so special? Put batteries in it and put the diode in the heat sink/ set screw it in? Damn son that must have taken hours. Seriously I would love to know what you did worth that $225 profit for something we all know took less than 1 hour of ur time to build. __________________ My Reviews and Threads

04-29-2012, 09:09 PM	#39
rpaloalto Class 3R Laser Join Date: Jun 2009 Location: Palo Alto, CA Posts: 1,258 Rep Power: 121	Re: conical focus adapter vs foucusing rings Ryan your going to make a lot of enemies around here. You think your a big shot and dont know how to stay out of trouble. I have a feeling your days are numbered here at LPF. AND WHY IS IT YOUR CONCERN WHO I GIVE PLUS REP TO IN THIS THREAD. PLEASE DONT SEND ME ANOTHER PM ASKING WHY I GAVE MACHINIST JOE + REP __________________ Read The Forum Rules Follow The Forum Rules Be Kind To Your Fellow LPF Brothers ----------------------------------------------------- Builds, Hosts and Optics from Flaminpyro, Ehgemus, RA_pierce, jayrob, LarryDFW and Me Last edited by rpaloalto; 04-29-2012 at 09:17 PM.

04-29-2012, 09:16 PM	#44
Machinist Joe Class 2 Laser Join Date: Jan 2012 Posts: 456 Rep Power: 14	Re: conical focus adapter vs foucusing rings RyanElectro neg reps me saying "you fail to get the point" Obviously it is you that doesn't get the point Ryan, because everybody here disagrees with you, and is on my side. Last edited by Machinist Joe; 04-29-2012 at 09:17 PM.

04-29-2012, 09:23 PM	#47
Machinist Joe Class 2 Laser Join Date: Jan 2012 Posts: 456 Rep Power: 14	Re: conical focus adapter vs foucusing rings Thanks bennett! If I ever sell lasers here, I will sell them at the right price, not 200%+ markup like somebody else here

04-29-2012, 09:23 PM	#48
RyanElectro Class 2M Laser Join Date: Feb 2012 Location: Canada Posts: 804 Rep Power: 46	Re: conical focus adapter vs foucusing rings I neg repped you for absolute rudeness and yes you are clearly just siding your friends. I'm not a child, I don't need to call my "buddies" to this thread to get them to post. __________________ *Currently Selling:* *External Lens Spring* \| WORKS WITH G LENSES \| Throw that teflon tape out! *Coming Soon:* *The "Just-Add-Diode V2" Kit* Last edited by RyanElectro; 04-29-2012 at 09:29 PM.

04-29-2012, 09:26 PM	#50
Machinist Joe Class 2 Laser Join Date: Jan 2012 Posts: 456 Rep Power: 14	Re: conical focus adapter vs foucusing rings So if you neg repped him for being rude, why did you neg rep me? Cause I'm telling you that you're wrong? lol BTW I just wanted to say thanks for the good laugh. I'm finding all of this quite humorous. WAIT, and you neg repped ARG. Ahahaha wow. What was that for? Last edited by Machinist Joe; 04-29-2012 at 09:28 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode