Laser pointer discussion. Read/write reviews of laser pointers and laser pointer companies. Learn about all types of laser pointers and lasers





Welcome to Laser Pointer Forums! If you are looking for a laser pointer or want to compare different laser pointer companies, you may want to check out the LPF Laser Pointer Company Database. The link will open in a new window for your convenience.








Green Laser Pointers by Category Blue Laser Pointers by Category Red Laser Pointers by Category
Yellow Laser Pointers by Category Violet Laser Pointers by Category Orange Laser Pointers by Category
Top Laser Pointers by Power - 1 Watt+ Top Laser Pointers by Power - 500mW+ Top Laser Pointers by Power - 250mW+
Laser Pointer Database High Power Laser Pointers Laser Pointer Diodes
Laser Technology Laser Pointer Parts Lasers by Wavelength
Top 10 Laser Pointer Companies Laser Pointer Company Database Visible Beam Laser Pointers


One laser store meets all your needs

























Go Back   Laser Pointer Forums - Discuss Laser Pointers > Lasers > Optics



LPF List of Laser Pointer Companies (link opens new window)



Reply
 
LinkBack Thread Tools Display Modes
Old 11-03-2014, 02:10 AM #33
CDBEAM777's Avatar
Class 2M Laser
 
Join Date: Feb 2010
Posts: 879
Rep Power: 11937
CDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond repute
CDBEAM777 CDBEAM777 is online now
Class 2M Laser
CDBEAM777's Avatar
 
Join Date: Feb 2010
Posts: 879
Rep Power: 11937
CDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond repute
Default Re: Conceptual design of anamorphic prisms on sinner focus ring. Pix!

Did a little doodling tonight...and some machining !! See pic of possible C-Lens arrangement for Wmacky three (3) holer ?? Looks like maybe u will need about 1.73" (43.94mm). Depends on how far out the collimation lens extends. This pic has the lens out .38" (9.65mm). I have a work-around if you do not have the length needed ! PM me!

Work'in on the TS/EZunit. Update soon....And
Attached Thumbnails
Conceptual design of anamorphic prisms on sinner focus ring. Pix!-ezca-cl-general-arrangment-3-holer.jpg  


__________________
Lite'em Up CDBEAM=======>...and....
"Robby...Where have you been? I've beamed and beamed "

Solar Prominence-Laser Lumia combined with audio http://laserpointerforums.com/f47/laser-lumia-terrawatt-labs-97261.html
CYAN CANNON V BUILD-Green + Blue = Photon Cannon - Build resumed http://laserpointerforums.com/f49/cy...ild-94999.html
Titanium Cyprus TRI EDC with 520 nm and GITD Europium barrel rings-Completed http://laserpointerforums.com/f45/my...t-94978-2.html
TRIDENTIS BUILD-Three (3) 445 Combiner-Knife edge-Completed http://laserpointerforums.com/f65/tr...uty-83781.html
DRAGON'S HEAD BUILD-Optically corrected P73-Completed http://laserpointerforums.com/f50/no...ign-87235.html
Purple pHAZE Combiner - Red + Blue = Purple-Completed http://laserpointerforums.com/f42/pu...ple-93717.html
Sky Blue Ramjet-Corrected NUBMO7E- Completed http://laserpointerforums.com/f42/sk...ild-94646.html
Check out http://www.hobbylasers.com/

Last edited by CDBEAM777; 11-03-2014 at 02:11 AM.
CDBEAM777 is online now   Reply With Quote







LPF List of Laser Pointer Companies (link opens new window)







Old 11-03-2014, 03:06 AM #34
Class 1M Laser
 
Join Date: May 2014
Location: Middleburg Florida
Posts: 164
Rep Power: 5
Wmacky will become famous soon enoughWmacky will become famous soon enough
Wmacky Wmacky is offline
Class 1M Laser
 
Join Date: May 2014
Location: Middleburg Florida
Posts: 164
Rep Power: 5
Wmacky will become famous soon enoughWmacky will become famous soon enough
Default Re: Conceptual design of anamorphic prisms on sinner focus ring. Pix!

Quote:
Originally Posted by CDBEAM777 View Post
Did a little doodling tonight...and some machining !! See pic of possible C-Lens arrangement for Wmacky three (3) holer ?? Looks like maybe u will need about 1.73" (43.94mm). Depends on how far out the collimation lens extends. This pic has the lens out .38" (9.65mm). I have a work-around if you do not have the length needed ! PM me!

Work'in on the TS/EZunit. Update soon....And
My shelf is about 1 5/8" in length. I might be able to push the module back into the head a little?
Wmacky is offline   Reply With Quote
Old 11-03-2014, 04:03 AM #35
CDBEAM777's Avatar
Class 2M Laser
 
Join Date: Feb 2010
Posts: 879
Rep Power: 11937
CDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond repute
CDBEAM777 CDBEAM777 is online now
Class 2M Laser
CDBEAM777's Avatar
 
Join Date: Feb 2010
Posts: 879
Rep Power: 11937
CDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond repute
Default Re: Conceptual design of anamorphic prisms on sinner focus ring. Pix!

Hmmmm....Yes, see pic V2....we can "move the furniture around"... a little. But...I have a suspicion that the " Optic Gods " may have some further tricks up their sleeve's !!!....as in the minimal separation distance between the LD collimation lens and the first Plano concave cylindrical lens !!! On the DH P-73 unit....this distance was 25.3mm

I must experiment with the TS lenses. R U wanting to correct the 3.5W blue or the lower power 9mm blue ??

Thank you though...for this issue has re-directed my work....for I had forgotten that this distance metric needs to be determined....then....the adaptor can be machined to allow the optimal spacing !! Too much room is OK for the EZ....Too little....and the piece is a paper weight....and I have enough of those !!
Attached Thumbnails
Conceptual design of anamorphic prisms on sinner focus ring. Pix!-ezca-cl-general-arrangment-3-holerv2.jpg  
__________________
Lite'em Up CDBEAM=======>...and....
"Robby...Where have you been? I've beamed and beamed "

Solar Prominence-Laser Lumia combined with audio http://laserpointerforums.com/f47/laser-lumia-terrawatt-labs-97261.html
CYAN CANNON V BUILD-Green + Blue = Photon Cannon - Build resumed http://laserpointerforums.com/f49/cy...ild-94999.html
Titanium Cyprus TRI EDC with 520 nm and GITD Europium barrel rings-Completed http://laserpointerforums.com/f45/my...t-94978-2.html
TRIDENTIS BUILD-Three (3) 445 Combiner-Knife edge-Completed http://laserpointerforums.com/f65/tr...uty-83781.html
DRAGON'S HEAD BUILD-Optically corrected P73-Completed http://laserpointerforums.com/f50/no...ign-87235.html
Purple pHAZE Combiner - Red + Blue = Purple-Completed http://laserpointerforums.com/f42/pu...ple-93717.html
Sky Blue Ramjet-Corrected NUBMO7E- Completed http://laserpointerforums.com/f42/sk...ild-94646.html
Check out http://www.hobbylasers.com/

Last edited by CDBEAM777; 11-03-2014 at 04:09 AM. Reason: more blah blah
CDBEAM777 is online now   Reply With Quote
Old 11-03-2014, 08:27 PM #36
Class 1M Laser
 
Join Date: May 2014
Location: Middleburg Florida
Posts: 164
Rep Power: 5
Wmacky will become famous soon enoughWmacky will become famous soon enough
Wmacky Wmacky is offline
Class 1M Laser
 
Join Date: May 2014
Location: Middleburg Florida
Posts: 164
Rep Power: 5
Wmacky will become famous soon enoughWmacky will become famous soon enough
Default Re: Conceptual design of anamorphic prisms on sinner focus ring. Pix!

3.5W blue if I can get it corrected to an acceptable degree!
Wmacky is offline   Reply With Quote
Old 11-04-2014, 12:13 AM #37
Down with Umbrella's Avatar
Class 2M Laser
 
Join Date: Aug 2013
Location: Kennebunk, Maine
Posts: 965
Rep Power: 2311
Down with Umbrella has a reputation beyond reputeDown with Umbrella has a reputation beyond reputeDown with Umbrella has a reputation beyond reputeDown with Umbrella has a reputation beyond reputeDown with Umbrella has a reputation beyond reputeDown with Umbrella has a reputation beyond reputeDown with Umbrella has a reputation beyond reputeDown with Umbrella has a reputation beyond reputeDown with Umbrella has a reputation beyond reputeDown with Umbrella has a reputation beyond reputeDown with Umbrella has a reputation beyond repute
Down with Umbrella Down with Umbrella is online now
Class 2M Laser
Down with Umbrella's Avatar
 
Join Date: Aug 2013
Location: Kennebunk, Maine
Posts: 965
Rep Power: 2311
Down with Umbrella has a reputation beyond reputeDown with Umbrella has a reputation beyond reputeDown with Umbrella has a reputation beyond reputeDown with Umbrella has a reputation beyond reputeDown with Umbrella has a reputation beyond reputeDown with Umbrella has a reputation beyond reputeDown with Umbrella has a reputation beyond reputeDown with Umbrella has a reputation beyond reputeDown with Umbrella has a reputation beyond reputeDown with Umbrella has a reputation beyond reputeDown with Umbrella has a reputation beyond repute
Default Re: Conceptual design of anamorphic prisms on sinner focus ring. Pix!

Go for the 3.5W. Step into the big league

Beam correction for this diode would really be advantageous because the divergence is so bad to begin with. With such a good looking host it would be nice to have big power to match it.
__________________
"Rosemary had an accident." TDWP

Down with Umbrella is online now   Reply With Quote
Old 11-04-2014, 02:46 AM #38
CDBEAM777's Avatar
Class 2M Laser
 
Join Date: Feb 2010
Posts: 879
Rep Power: 11937
CDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond repute
CDBEAM777 CDBEAM777 is online now
Class 2M Laser
CDBEAM777's Avatar
 
Join Date: Feb 2010
Posts: 879
Rep Power: 11937
CDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond repute
Default Re: Conceptual design of anamorphic prisms on sinner focus ring. Pix!

OK...I say go for the NDB 7A75 LD...This one really needs " glasses " I do not have this diode so I cannot determine the optimal distance between the collimation lens and the first cylindrical lens. Mateusz, you tested this LD and got great results...What was the optimal distance between the collimation lens and the first optic ( Plano concave ) ??? And what was the optimal distance between the cylindrical lenses ???

I will be using the NDB 7875 LD (Standard 9mm) to do my testing. Thanx to Wmacky, I have taken a step back before I machine the next-gen EZ for use with the TS lenses. See the attached pic of a " Optics Test Bed " I am now working on. This set up will determine optimal separation distances between the glass and those metrics will then govern the dimensions of the EZ holder.

These things just take time. Pass the popcorn please, stay tuned for more "Fun with Optics"....and...
Attached Thumbnails
Conceptual design of anamorphic prisms on sinner focus ring. Pix!-test-bed-ts-optics.jpg   Conceptual design of anamorphic prisms on sinner focus ring. Pix!-fun-optics-text1.jpg  
__________________
Lite'em Up CDBEAM=======>...and....
"Robby...Where have you been? I've beamed and beamed "

Solar Prominence-Laser Lumia combined with audio http://laserpointerforums.com/f47/laser-lumia-terrawatt-labs-97261.html
CYAN CANNON V BUILD-Green + Blue = Photon Cannon - Build resumed http://laserpointerforums.com/f49/cy...ild-94999.html
Titanium Cyprus TRI EDC with 520 nm and GITD Europium barrel rings-Completed http://laserpointerforums.com/f45/my...t-94978-2.html
TRIDENTIS BUILD-Three (3) 445 Combiner-Knife edge-Completed http://laserpointerforums.com/f65/tr...uty-83781.html
DRAGON'S HEAD BUILD-Optically corrected P73-Completed http://laserpointerforums.com/f50/no...ign-87235.html
Purple pHAZE Combiner - Red + Blue = Purple-Completed http://laserpointerforums.com/f42/pu...ple-93717.html
Sky Blue Ramjet-Corrected NUBMO7E- Completed http://laserpointerforums.com/f42/sk...ild-94646.html
Check out http://www.hobbylasers.com/

Last edited by CDBEAM777; 11-04-2014 at 03:38 AM. Reason: Clairification
CDBEAM777 is online now   Reply With Quote
Old 11-05-2014, 07:44 AM #39
Tomorrows System's Avatar
Class 1M Laser
 
Join Date: Jul 2014
Posts: 100
Rep Power: 1314
Tomorrows System has a reputation beyond reputeTomorrows System has a reputation beyond reputeTomorrows System has a reputation beyond reputeTomorrows System has a reputation beyond reputeTomorrows System has a reputation beyond reputeTomorrows System has a reputation beyond reputeTomorrows System has a reputation beyond reputeTomorrows System has a reputation beyond reputeTomorrows System has a reputation beyond reputeTomorrows System has a reputation beyond reputeTomorrows System has a reputation beyond repute
Tomorrows System Tomorrows System is offline
Class 1M Laser
Tomorrows System's Avatar
 
Join Date: Jul 2014
Posts: 100
Rep Power: 1314
Tomorrows System has a reputation beyond reputeTomorrows System has a reputation beyond reputeTomorrows System has a reputation beyond reputeTomorrows System has a reputation beyond reputeTomorrows System has a reputation beyond reputeTomorrows System has a reputation beyond reputeTomorrows System has a reputation beyond reputeTomorrows System has a reputation beyond reputeTomorrows System has a reputation beyond reputeTomorrows System has a reputation beyond reputeTomorrows System has a reputation beyond repute
Default Re: Conceptual design of anamorphic prisms on sinner focus ring. Pix!

For the 3,5W the outer dimensions of lens pair is around 35 mm. So between lens is around 23 - 25mm.

The distance between collmator lens and cylindrical lens is not important. I was using them in far distance around 10cm as also in close distance around 5mm.

Actually last days I had to adjust 2 pairs and it went really smoothly. Around 15 minutes.
__________________
Mateusz
OptLasers Team manager
http://optlasers.com
Tomorrow's System LTD
Tomorrows System is offline   Reply With Quote
Old 11-05-2014, 08:06 AM #40
The Lightning Stalker's Avatar
Class 3B Laser
 
Join Date: Aug 2013
Location: MI, US
Posts: 2,654
Rep Power: 716
The Lightning Stalker has a reputation beyond reputeThe Lightning Stalker has a reputation beyond reputeThe Lightning Stalker has a reputation beyond reputeThe Lightning Stalker has a reputation beyond reputeThe Lightning Stalker has a reputation beyond reputeThe Lightning Stalker has a reputation beyond reputeThe Lightning Stalker has a reputation beyond reputeThe Lightning Stalker has a reputation beyond reputeThe Lightning Stalker has a reputation beyond reputeThe Lightning Stalker has a reputation beyond reputeThe Lightning Stalker has a reputation beyond repute
The Lightning Stalker The Lightning Stalker is offline
Class 3B Laser
The Lightning Stalker's Avatar
 
Join Date: Aug 2013
Location: MI, US
Posts: 2,654
Rep Power: 716
The Lightning Stalker has a reputation beyond reputeThe Lightning Stalker has a reputation beyond reputeThe Lightning Stalker has a reputation beyond reputeThe Lightning Stalker has a reputation beyond reputeThe Lightning Stalker has a reputation beyond reputeThe Lightning Stalker has a reputation beyond reputeThe Lightning Stalker has a reputation beyond reputeThe Lightning Stalker has a reputation beyond reputeThe Lightning Stalker has a reputation beyond reputeThe Lightning Stalker has a reputation beyond reputeThe Lightning Stalker has a reputation beyond repute
Default Re: Conceptual design of anamorphic prisms on sinner focus ring. Pix!

This has been posted before, but deserves
another watch if you're playing with cylinder
lenses.

__________________
ALL NEW MEMBERS MUST READ THIS!!! --> http://www.laserpointersafety.com

"Where, now, is the way by which the light distributes itself" - Job 38:24

YouTube Channel
The Lightning Stalker is offline   Reply With Quote
Old 11-05-2014, 08:06 PM #41
CDBEAM777's Avatar
Class 2M Laser
 
Join Date: Feb 2010
Posts: 879
Rep Power: 11937
CDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond repute
CDBEAM777 CDBEAM777 is online now
Class 2M Laser
CDBEAM777's Avatar
 
Join Date: Feb 2010
Posts: 879
Rep Power: 11937
CDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond repute
Default Re: Conceptual design of anamorphic prisms on sinner focus ring. Pix!

Quote:
Originally Posted by Tomorrows System View Post
For the 3,5W the outer dimensions of lens pair is around 35 mm. So between lens is around 23 - 25mm.

The distance between collmator lens and cylindrical lens is not important. I was using them in far distance around 10cm as also in close distance around 5mm.

Actually last days I had to adjust 2 pairs and it went really smoothly. Around 15 minutes.
Mateusz, Thank you for the info. See attached revised drawing - V11 - based on Mateusz's metrics. No change other than increasing the lens to lens distance. Looks like the TS lenses will work with the existing length on the Wmacky "3 holer"...and will tame the NDB 7A75 " Bar Generator "

Since both Cylindrical's are 12mm wide, I would add two (2) 1/4" (6.35mm) Aluminum bar stock to provide a channel on the flat of the semi-circular extension. The cylindrical lenses will sit down into this channel. The fast axis of the NDB 7A75will need to be perpendicular to the extension flat ( just rotate the Aixiz module until the stripe goes up and down).

After the LD is radially adjusted to the correct orientation, Set the focus and add the cylindricals. When the optimal farfield beam is achieved, a few drops of clear epoxy to fix the lenses....and that's it !!

Note: The Planters video is excellent....and for projectors, spatial filtering is the way to go.....but...it add about 6" (152mm) to the optical train...Meh !!! Too long for me !!

Work progresses on the Test bed. Had to purchase a 9mm end mill bit to open up the seat area on the LSP diode mount to accept the 9mm LD. More " Fun with Optics ".....And...
Attached Thumbnails
Conceptual design of anamorphic prisms on sinner focus ring. Pix!-ezca-cl-v11.jpg  
__________________
Lite'em Up CDBEAM=======>...and....
"Robby...Where have you been? I've beamed and beamed "

Solar Prominence-Laser Lumia combined with audio http://laserpointerforums.com/f47/laser-lumia-terrawatt-labs-97261.html
CYAN CANNON V BUILD-Green + Blue = Photon Cannon - Build resumed http://laserpointerforums.com/f49/cy...ild-94999.html
Titanium Cyprus TRI EDC with 520 nm and GITD Europium barrel rings-Completed http://laserpointerforums.com/f45/my...t-94978-2.html
TRIDENTIS BUILD-Three (3) 445 Combiner-Knife edge-Completed http://laserpointerforums.com/f65/tr...uty-83781.html
DRAGON'S HEAD BUILD-Optically corrected P73-Completed http://laserpointerforums.com/f50/no...ign-87235.html
Purple pHAZE Combiner - Red + Blue = Purple-Completed http://laserpointerforums.com/f42/pu...ple-93717.html
Sky Blue Ramjet-Corrected NUBMO7E- Completed http://laserpointerforums.com/f42/sk...ild-94646.html
Check out http://www.hobbylasers.com/

Last edited by CDBEAM777; 11-05-2014 at 11:27 PM. Reason: Corrected drawing V11 and more blah, blah
CDBEAM777 is online now   Reply With Quote
Old 11-06-2014, 03:16 AM #42
CDBEAM777's Avatar
Class 2M Laser
 
Join Date: Feb 2010
Posts: 879
Rep Power: 11937
CDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond repute
CDBEAM777 CDBEAM777 is online now
Class 2M Laser
CDBEAM777's Avatar
 
Join Date: Feb 2010
Posts: 879
Rep Power: 11937
CDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond repute
Default Re: Conceptual design of anamorphic prisms on sinner focus ring. Pix!

Pass the popcorn....some progress pics on the TS optics test bed......Had to modify the standard LSP 5.6 LD mount to accept the 9mm 7875.

Now...nail down the mounts, hook up the juice...a little" twist and shout" with the LD to get the right orientation, a little danc'in around with the C-lenses....and we see what this TS glass can do !! And...
Attached Thumbnails
Conceptual design of anamorphic prisms on sinner focus ring. Pix!-lsp-mount-being-modified-9mm-ld.jpg   Conceptual design of anamorphic prisms on sinner focus ring. Pix!-9mm-hole-1.jpg   Conceptual design of anamorphic prisms on sinner focus ring. Pix!-9mm-hole-2.jpg   Conceptual design of anamorphic prisms on sinner focus ring. Pix!-ez-progress-11.5.2014.jpg  
__________________
Lite'em Up CDBEAM=======>...and....
"Robby...Where have you been? I've beamed and beamed "

Solar Prominence-Laser Lumia combined with audio http://laserpointerforums.com/f47/laser-lumia-terrawatt-labs-97261.html
CYAN CANNON V BUILD-Green + Blue = Photon Cannon - Build resumed http://laserpointerforums.com/f49/cy...ild-94999.html
Titanium Cyprus TRI EDC with 520 nm and GITD Europium barrel rings-Completed http://laserpointerforums.com/f45/my...t-94978-2.html
TRIDENTIS BUILD-Three (3) 445 Combiner-Knife edge-Completed http://laserpointerforums.com/f65/tr...uty-83781.html
DRAGON'S HEAD BUILD-Optically corrected P73-Completed http://laserpointerforums.com/f50/no...ign-87235.html
Purple pHAZE Combiner - Red + Blue = Purple-Completed http://laserpointerforums.com/f42/pu...ple-93717.html
Sky Blue Ramjet-Corrected NUBMO7E- Completed http://laserpointerforums.com/f42/sk...ild-94646.html
Check out http://www.hobbylasers.com/

Last edited by CDBEAM777; 11-06-2014 at 03:21 AM.
CDBEAM777 is online now   Reply With Quote
Old 11-06-2014, 06:12 PM #43
upaa27's Avatar
Class 2M Laser
 
Join Date: Jul 2013
Location: San Francisco
Posts: 624
Rep Power: 191
upaa27 has a reputation beyond reputeupaa27 has a reputation beyond reputeupaa27 has a reputation beyond reputeupaa27 has a reputation beyond reputeupaa27 has a reputation beyond reputeupaa27 has a reputation beyond reputeupaa27 has a reputation beyond reputeupaa27 has a reputation beyond reputeupaa27 has a reputation beyond reputeupaa27 has a reputation beyond reputeupaa27 has a reputation beyond repute
upaa27 upaa27 is offline
Class 2M Laser
upaa27's Avatar
 
Join Date: Jul 2013
Location: San Francisco
Posts: 624
Rep Power: 191
upaa27 has a reputation beyond reputeupaa27 has a reputation beyond reputeupaa27 has a reputation beyond reputeupaa27 has a reputation beyond reputeupaa27 has a reputation beyond reputeupaa27 has a reputation beyond reputeupaa27 has a reputation beyond reputeupaa27 has a reputation beyond reputeupaa27 has a reputation beyond reputeupaa27 has a reputation beyond reputeupaa27 has a reputation beyond repute
Default Re: Conceptual design of anamorphic prisms on sinner focus ring. Pix!

Really excited to see this...
upaa27 is offline   Reply With Quote
Old 11-08-2014, 12:45 AM #44
IWIRE's Avatar
Class 2M Laser
 
Join Date: Dec 2013
Location: Oklahoma
Posts: 630
Rep Power: 248
IWIRE has a reputation beyond reputeIWIRE has a reputation beyond reputeIWIRE has a reputation beyond reputeIWIRE has a reputation beyond reputeIWIRE has a reputation beyond reputeIWIRE has a reputation beyond reputeIWIRE has a reputation beyond reputeIWIRE has a reputation beyond reputeIWIRE has a reputation beyond reputeIWIRE has a reputation beyond reputeIWIRE has a reputation beyond repute
IWIRE IWIRE is offline
Class 2M Laser
IWIRE's Avatar
 
Join Date: Dec 2013
Location: Oklahoma
Posts: 630
Rep Power: 248
IWIRE has a reputation beyond reputeIWIRE has a reputation beyond reputeIWIRE has a reputation beyond reputeIWIRE has a reputation beyond reputeIWIRE has a reputation beyond reputeIWIRE has a reputation beyond reputeIWIRE has a reputation beyond reputeIWIRE has a reputation beyond reputeIWIRE has a reputation beyond reputeIWIRE has a reputation beyond reputeIWIRE has a reputation beyond repute
Default Re: Conceptual design of anamorphic prisms on sinner focus ring. Pix!

Quote:
Originally Posted by CDBEAM777 View Post
Pass the popcorn....some progress pics on the TS optics test bed......Had to modify the standard LSP 5.6 LD mount to accept the 9mm 7875.

Now...nail down the mounts, hook up the juice...a little" twist and shout" with the LD to get the right orientation, a little danc'in around with the C-lenses....and we see what this TS glass can do !! And...
Ha ! Looks great ! So you got your "shrine" fired up Thanks for sharing all the info !
__________________

He said "Let there be light !",
and there was,
and it was good.
So we amplified it.
IWIRE is offline   Reply With Quote
Old 11-08-2014, 02:06 AM #45
CDBEAM777's Avatar
Class 2M Laser
 
Join Date: Feb 2010
Posts: 879
Rep Power: 11937
CDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond repute
CDBEAM777 CDBEAM777 is online now
Class 2M Laser
CDBEAM777's Avatar
 
Join Date: Feb 2010
Posts: 879
Rep Power: 11937
CDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond repute
Default Re: Conceptual design of anamorphic prisms on sinner focus ring. Pix!

Quote:
Originally Posted by IWIRE View Post
Ha ! Looks great ! So you got your "shrine" fired up Thanks for sharing all the info !
Well....These things always take a lot more time than I estimate !!! I have the components " nailed " down...but I have been busy with work....so that is all 4 now. See pic.

I will forge ahead this weekend !!

" Shrine " haha....yea...Considering the # of diodes I have punished into oblivion !!! " Shrine " is not the word....More like " Altar of Quantum Well Sacrafice "....that is an accurate description !!

Thanx for the support !!! Stay tuned....should be somewhat......entertaining...And...
Attached Thumbnails
Conceptual design of anamorphic prisms on sinner focus ring. Pix!-ts-test-bed-11.7.2014.jpg  
__________________
Lite'em Up CDBEAM=======>...and....
"Robby...Where have you been? I've beamed and beamed "

Solar Prominence-Laser Lumia combined with audio http://laserpointerforums.com/f47/laser-lumia-terrawatt-labs-97261.html
CYAN CANNON V BUILD-Green + Blue = Photon Cannon - Build resumed http://laserpointerforums.com/f49/cy...ild-94999.html
Titanium Cyprus TRI EDC with 520 nm and GITD Europium barrel rings-Completed http://laserpointerforums.com/f45/my...t-94978-2.html
TRIDENTIS BUILD-Three (3) 445 Combiner-Knife edge-Completed http://laserpointerforums.com/f65/tr...uty-83781.html
DRAGON'S HEAD BUILD-Optically corrected P73-Completed http://laserpointerforums.com/f50/no...ign-87235.html
Purple pHAZE Combiner - Red + Blue = Purple-Completed http://laserpointerforums.com/f42/pu...ple-93717.html
Sky Blue Ramjet-Corrected NUBMO7E- Completed http://laserpointerforums.com/f42/sk...ild-94646.html
Check out http://www.hobbylasers.com/

Last edited by CDBEAM777; 11-08-2014 at 02:35 AM.
CDBEAM777 is online now   Reply With Quote
Old 11-08-2014, 03:47 AM #46
Down with Umbrella's Avatar
Class 2M Laser
 
Join Date: Aug 2013
Location: Kennebunk, Maine
Posts: 965
Rep Power: 2311
Down with Umbrella has a reputation beyond reputeDown with Umbrella has a reputation beyond reputeDown with Umbrella has a reputation beyond reputeDown with Umbrella has a reputation beyond reputeDown with Umbrella has a reputation beyond reputeDown with Umbrella has a reputation beyond reputeDown with Umbrella has a reputation beyond reputeDown with Umbrella has a reputation beyond reputeDown with Umbrella has a reputation beyond reputeDown with Umbrella has a reputation beyond reputeDown with Umbrella has a reputation beyond repute
Down with Umbrella Down with Umbrella is online now
Class 2M Laser
Down with Umbrella's Avatar
 
Join Date: Aug 2013
Location: Kennebunk, Maine
Posts: 965
Rep Power: 2311
Down with Umbrella has a reputation beyond reputeDown with Umbrella has a reputation beyond reputeDown with Umbrella has a reputation beyond reputeDown with Umbrella has a reputation beyond reputeDown with Umbrella has a reputation beyond reputeDown with Umbrella has a reputation beyond reputeDown with Umbrella has a reputation beyond reputeDown with Umbrella has a reputation beyond reputeDown with Umbrella has a reputation beyond reputeDown with Umbrella has a reputation beyond reputeDown with Umbrella has a reputation beyond repute
Default Re: Conceptual design of anamorphic prisms on sinner focus ring. Pix!

Quote:
Originally Posted by CDBEAM777 View Post
Well....These things always take a lot more time than I estimate !!! I have the components " nailed " down...but I have been busy with work....so that is all 4 now. See pic.

I will forge ahead this weekend !!
I bet you dream about optics in your sleep zZ +1
__________________
"Rosemary had an accident." TDWP

Down with Umbrella is online now   Reply With Quote
Old 11-08-2014, 09:00 PM #47
CDBEAM777's Avatar
Class 2M Laser
 
Join Date: Feb 2010
Posts: 879
Rep Power: 11937
CDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond repute
CDBEAM777 CDBEAM777 is online now
Class 2M Laser
CDBEAM777's Avatar
 
Join Date: Feb 2010
Posts: 879
Rep Power: 11937
CDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond reputeCDBEAM777 has a reputation beyond repute
Default Re: Conceptual design of anamorphic prisms on sinner focus ring. Pix!

Quote:
Originally Posted by Down with Umbrella View Post
I bet you dream about optics in your sleep zZ +1
HAHAHAHAHAHAHAHA !! " Dreams of Optics " Yikes.....Well, I know enough to know, I do not know squat !!! I read and try to understand. There are several on LPF that are really do know optics. I dream of knowing what they know !! I dream of understanding " ETENDUE "

I just happen to have the tools to bring to life what I think I understand !! Sometimes this works !! Sometimes not ! But...it is a fun ride !!!...and I like to share the ups and downs.....hopefully, some members find these post's worthwhile....And
Attached Thumbnails
Conceptual design of anamorphic prisms on sinner focus ring. Pix!-wizardofozscarecrowdiplomarapture-2.jpg  
__________________
Lite'em Up CDBEAM=======>...and....
"Robby...Where have you been? I've beamed and beamed "

Solar Prominence-Laser Lumia combined with audio http://laserpointerforums.com/f47/laser-lumia-terrawatt-labs-97261.html
CYAN CANNON V BUILD-Green + Blue = Photon Cannon - Build resumed http://laserpointerforums.com/f49/cy...ild-94999.html
Titanium Cyprus TRI EDC with 520 nm and GITD Europium barrel rings-Completed http://laserpointerforums.com/f45/my...t-94978-2.html
TRIDENTIS BUILD-Three (3) 445 Combiner-Knife edge-Completed http://laserpointerforums.com/f65/tr...uty-83781.html
DRAGON'S HEAD BUILD-Optically corrected P73-Completed http://laserpointerforums.com/f50/no...ign-87235.html
Purple pHAZE Combiner - Red + Blue = Purple-Completed http://laserpointerforums.com/f42/pu...ple-93717.html
Sky Blue Ramjet-Corrected NUBMO7E- Completed http://laserpointerforums.com/f42/sk...ild-94646.html
Check out http://www.hobbylasers.com/
CDBEAM777 is online now   Reply With Quote
Old 11-09-2014, 12:30 AM #48
Banned
 
Join Date: May 2011
Posts: 1,065
Rep Power: 0
VisibleGreen has a reputation beyond reputeVisibleGreen has a reputation beyond reputeVisibleGreen has a reputation beyond reputeVisibleGreen has a reputation beyond reputeVisibleGreen has a reputation beyond reputeVisibleGreen has a reputation beyond reputeVisibleGreen has a reputation beyond reputeVisibleGreen has a reputation beyond reputeVisibleGreen has a reputation beyond reputeVisibleGreen has a reputation beyond reputeVisibleGreen has a reputation beyond repute
VisibleGreen VisibleGreen is offline
Banned
 
Join Date: May 2011
Posts: 1,065
Rep Power: 0
VisibleGreen has a reputation beyond reputeVisibleGreen has a reputation beyond reputeVisibleGreen has a reputation beyond reputeVisibleGreen has a reputation beyond reputeVisibleGreen has a reputation beyond reputeVisibleGreen has a reputation beyond reputeVisibleGreen has a reputation beyond reputeVisibleGreen has a reputation beyond reputeVisibleGreen has a reputation beyond reputeVisibleGreen has a reputation beyond reputeVisibleGreen has a reputation beyond repute
Default Re: Conceptual design of anamorphic prisms on sinner focus ring. Pix!

Quote:
Originally Posted by CDBEAM777 View Post
HAHAHAHAHAHAHAHA !! " Dreams of Optics " Yikes.....Well, I know enough to know, I do not know squat !!! I read and try to understand. There are several on LPF that are really do know optics. I dream of knowing what they know !! I dream of understanding " ETENDUE "

I just happen to have the tools to bring to life what I think I understand !! Sometimes this works !! Sometimes not ! But...it is a fun ride !!!...and I like to share the ups and downs.....hopefully, some members find these post's worthwhile....And
You're the only guy I know that ends his posts with "and"
VisibleGreen is offline   Reply With Quote
Reply





Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On











Loading








Green Laser Pointers by Category Blue Laser Pointers by Category Red Laser Pointers by Category
Yellow Laser Pointers by Category Violet Laser Pointers by Category Orange Laser Pointers by Category
Top Laser Pointers by Power - 1 Watt+ Top Laser Pointers by Power - 500mW+ Top Laser Pointers by Power - 250mW+
Laser Pointer Database High Power Laser Pointers Laser Pointer Diodes






Privacy Policy | Advertising Disclaimer | Terms of Use


 


All times are GMT. The time now is 06:35 PM.


Powered by: vBulletin
Copyright ©2000 - 2017, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO
Privacy Policy | Advertising Disclaimer | Terms of Use
Copyright (C) 2017 Laser Pointer Forums, LLC