DJNY
0
- Joined
- Nov 2, 2009
- Messages
- 5,991
- Points
- 83
It is the same laser model Cyparagon tested here
His was 511nm, so I expect mine to be anywhere around this value at room temperature.
I cooled it in the freezer for about 2 minutes and used a hairdryer to heat it up during the vid.
The most interesting part is from minute 0:15 - 0:40
small size vid, better turn off the sound
In case you can´t or don´t want to watch the vid, these pictures were taken during the vid in video-mode:
Picture taken at the beginning / cooled down
Picture taken at the end / heaten up
His was 511nm, so I expect mine to be anywhere around this value at room temperature.
I cooled it in the freezer for about 2 minutes and used a hairdryer to heat it up during the vid.
The most interesting part is from minute 0:15 - 0:40
In case you can´t or don´t want to watch the vid, these pictures were taken during the vid in video-mode:
Picture taken at the beginning / cooled down
Picture taken at the end / heaten up
Last edited: