- Joined
- Sep 28, 2007
- Messages
- 1,520
- Points
- 0
Got around to cutting the holes in the enclosure for my scanner today, the only completed hole is the IEC/Switch hole in the bottom left of the picture I still need to finish cutting the laser exit hole, add DMX connector holes, dip switch holes and make the microphone and pot holes larger.
Im pretty proud so far, and yes I know the laser exit hole looks like a disaster but so did the IEC hole at first. Just make lots of drill holes and then file the edges.
There was another topic about my build somewhere but I cant find it at the moment.
Edit: Specs are:
12K Scanner Kit (laserpic12) (Tuned to highest scan angle)
Rated 50mW 532nm Green DL Module
Im pretty proud so far, and yes I know the laser exit hole looks like a disaster but so did the IEC hole at first. Just make lots of drill holes and then file the edges.
There was another topic about my build somewhere but I cant find it at the moment.
Edit: Specs are:
12K Scanner Kit (laserpic12) (Tuned to highest scan angle)
Rated 50mW 532nm Green DL Module