Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Pictures of a 780nm laser build

Blord

0
Joined
Dec 24, 2007
Messages
5,356
Points
0
Hi all

I had some 780nm diodes left over from harvested sleds and have decided to build a 780nm laser.
My DX Dilda red laser has short-circuit inside and burnt the driver and the red diode. So I use this host for the build.
All the components are removed from the pcb and I use the LM317T for the new driver. The current was set op 224mA by a 5.5Ohm resistor. I didn't want to heat up the 1/4Watt resistor too much.

The famous Dilda laser :D
780nm-1.jpg


Flexdrive and Jib driver to compare the original driver.
780nm-2.jpg


Plenty of room to use the LM317 ic. It was place on a sticky heatpad.
780nm-3.jpg


The burn mark from the short-circuit is still there.
780nm-4.jpg


Ready to lase
780nm-5.jpg


A tiny red spot burning the paper. A very small smoke is seen :D
780nm-6.jpg


I hope you like it and be carefull with the invisible 780nm laser.
 





Joined
Sep 24, 2010
Messages
1,364
Points
0
Yeah cool :) wanna buy a nice host with lens assebely ?


<--- click for big
 
Last edited:

Ciaran

0
Joined
Dec 12, 2010
Messages
211
Points
0
Wow, nice laser! It's invisible, which makes it so much cooler. ^.^
 

Blord

0
Joined
Dec 24, 2007
Messages
5,356
Points
0
It has 160mW output measured with the Ophir LPM.
That was a long time ago I have build that 780nm laser. I have another 780nm diode in the C6 host. I don't use much of them. The dot and beam are invisible and the burning isn't impressive.
But I build it for my wavelength collection.
 
Joined
Jul 22, 2012
Messages
426
Points
28
Sorry for posting here, I only saw the post's date just above me! Happy new year!
 
Last edited:




Top