LOC, 635nm and a spiro...

these are my newest projects...
1st is a LOC from LPC815 running @ about 400mA with standart Aixiz lens and DDL driver, doing about 250mW
here's the video:


2nd is a SLD63518262 from modwerx. it's 635nm diode @ 40mA, doing about 7mW. DDL driver
:kewlpics: comin' soon

3rd is a green laser spirograph. the motors, base Al plate and one of the mirrors came out some old laser projector whiich I got from a friend (I've got also an controller for this, but don't know how it was used)
it uses DX true 50mW



next project: custom drivers 90-590mA (theoretically up to 8A) with TTL modulation, fitting Aixiz module
one more question: can I use the PBS from PHR sled to combine 2 LOCs?

If you want, I have a 15mm Red PBS cube here

The one from the PHR sled may work, but it'll be extremely inefficient.

Things said:

If you want, I have a 15mm Red PBS cube here

Click to expand...

these are quite expensive (for me)... how much $ do you want?
but I'd like first to try cheap/free found-at-home stuff