LPF Donation via Stripe | LPF Donation - Other Methods
Links below open in new window
ArcticMyst Security by Avery
LASER LENNY VER 1.0 - RGB Projector
- Thread starter noesc
- Start date
- Joined
- May 4, 2009
- Messages
- 5,443
- Points
- 113
Very Very Cool Lenny You have done a fine job, something to be proud of for sure 
That looks like a kick ass projector you have created it sure puts out some fine beamage :drool: +2 !!!
Come on your not getting away that easy, PICTURES of the beast !
That looks like a kick ass projector you have created it sure puts out some fine beamage :drool: +2 !!!
Come on your not getting away that easy, PICTURES of the beast !
Last edited:
Actually that was all mounted on invidiual appropriate heatsinks then screwed into a 2ft by 2ft 1inch thick plywood.
It is now in pieces while I attempt to use another 1inch thick 20 x 20 inch aluminum plate I scored from work.. it has some threaded holes already so Im trying to fit things to those.. its a bit ugly atm
It is now in pieces while I attempt to use another 1inch thick 20 x 20 inch aluminum plate I scored from work.. it has some threaded holes already so Im trying to fit things to those.. its a bit ugly atm
What are the powers you're using? Red looks a little lacking, but nice work
Although, a 1 inch thick baseplate is kind of overkill IMO. Nothing wrong with using it though, if you don't mind the weight. I can stand on my 6mm baseplate and it ain't going anywhere
Cheers,
Dan
Although, a 1 inch thick baseplate is kind of overkill IMO. Nothing wrong with using it though, if you don't mind the weight. I can stand on my 6mm baseplate and it ain't going anywhere
Cheers,
Dan
I love my job... Took a stroll by the dumpster on Saturday night and found a 4ft wide 6ft long 1 inch think custom aluminum honeycomb board that had been damaged in the right corner by the binding strap.
I now have a bunch of 24x36x1 inch think ultra light panels.... Time to get working on a new design..
I now have a bunch of 24x36x1 inch think ultra light panels.... Time to get working on a new design..
CDHDC
0
- Joined
- Dec 3, 2009
- Messages
- 248
- Points
- 18
Very nice! I can't wait to see some pics after it's all mounted up on your new plate +1:gj:
+1:gj:
ped
0
- Joined
- Nov 25, 2008
- Messages
- 4,889
- Points
- 113
Flylife = Quality tune.
projector aint bad either.
projector aint bad either.
hakzaw1
0
- Joined
- Apr 2, 2009
- Messages
- 10,662
- Points
- 113
GOOD Find!! If you have any extra pieces bring me one to Newton.
seeya there-
'the other Lenny"
PS I have room in my car going to SELEM V from S Central Texas--for one(maybe two) more rider with room for gear PM asap.
