Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

Buy Site Supporter Role (remove some ads) | LPF Donations

Links below open in new window

FrozenGate by Avery

Jetlasers Ti-B titanium, 133mW 532nm green laser.

Blord

Blord

0
Joined
Dec 24, 2007
Messages
5,356
Points
0
I want to show some pictures of the Jetlasers DLP Ti-B green laser. It bought it from Hakzaw1 groupbuy. :beer:
It is a 532nm green laser running at one 14500 li-ion battery. You can turn the crown for focussing.
The laser is made from titanium. :drool:
The machining is very good but some edges should have a little better finishing. The attack crown is literary very sharp. ;)
I am a man of pictures so here they are,

The most ugly case I ever seen :D
Ti-1.jpg


Everything was packed well.
Ti-2.jpg


I also bought the 5X BE at the same time. I will make another thread of it.
Ti-3.jpg


I let the pictures speak. I hope you like it. :thanks:
Ti-4.jpg


Ti-5.jpg


Ti-6.jpg


Ti-7.jpg


Ti-8.jpg


Ti-9.jpg


Ti-10.jpg


Ti-11.jpg


Ti-12.jpg


Ti-13.jpg


Ti-14.jpg


Ti-17.jpg


Ti-15.jpg


Ti-16.jpg


LPM%20Jetlasers%20DPL-100%20Ti%20green.jpg
 
Last edited:





Re: Jetlasers DPL Ti, 133mW 532nm green laser.

That's one really good looking laser Blord! Great HQ Pictures as well. :)
 
Re: Jetlasers DPL Ti, 133mW 532nm green laser.

Make sure to not get beaten up for your new lunch box :beer:
 
Last edited:
Re: Jetlasers DPL Ti, 133mW 532nm green laser.

Very nice host! Awesome pics too! Congrats on that sweet laser.
 
Re: Jetlasers DPL Ti, 133mW 532nm green laser.

So now that you have a little bit more than, like, ALL lasers,

Thoughts on best low-budget high power green?
 
Re: Jetlasers DPL Ti, 133mW 532nm green laser.

Oh, I got to admit this host is soo sexy! :beer:

Jim
 
Re: Jetlasers DPL Ti, 133mW 532nm green laser.

Ugly, I don't think so, or not that will protect your laser in transit. Sexy host for sure what was the listed power?
 
Re: Jetlasers DPL Ti, 133mW 532nm green laser.

Any case is nice lol... power for these was supposed to be 100mW. Can't wait to get mine :D
 
Re: Jetlasers DPL Ti, 133mW 532nm green laser.

Nice host and beamshots pic. Thanks Blord. :angel:
 
Re: Jetlasers DPL Ti, 133mW 532nm green laser.

The case is no good. The foam on both side don't touch each when closed. The laser is still moving freely inside the case. I still have some cubic foam left from my previous build. I am going to rebuild the case :)
 
Re: Jetlasers DPL Ti, 133mW 532nm green laser.

Blord said:
The case is no good. The foam on both side don't touch each when closed. The laser is still moving freely inside the case. I still have some cubic foam left from my previous build. I am going to rebuild the case :)
Click to expand...
Thanks for the review and high definition pics and yes, the case is no good and it needs to be rebuilt. :o
 
Re: Jetlasers DPL Ti, 133mW 532nm green laser.

jander6442 said:
Ugly, I don't think so, or not that will protect your laser in transit. Sexy host for sure what was the listed power?
Click to expand...


IMHO that green plastic case should be seen as just an improvement over just bubble and a cardboard box- these Ti-BN are more deserving of something handmade of nice 'real' wood-
The ones I just sent out are not coming with any case.

Blord- as usual your pics rock- thanks for the kind words too.
My camera does not take very good macro shots- Can you add one showing the tailcap threads- I have been told that they are somewhat special.

Also what is your opinion of the on/off/ momentary switching? It has been pretty much the only neg comment.

And yes the tactical crown does make a good self defence weapon( thats its function)

These are now almost all gone- AFAIK no additional ones are going to be EVER made- I have not even listed them at the store-(greenlaserpointer.org) so if anyone wants to get one you had better PM me yesterday or sooner-
the price has gone up a little- these ship world wide at actual shipping cost.(additional)

no other nm or mW is available nor are any to be used as hosts.. sorry.

hak:beer:
 
Last edited:
More pictures of the tailcap and the threads. The "switch" was kinda unusual but it works well in practice. You have to set the tailcap just right. One advantage is that it will never break. :)

Ti-18.jpg


Ti-19.jpg
 
Your pic of the threads is so sharp I can see a fingerprint (or thumb) on your laser. notice the shape of the threads- square.

about the switch..

not any thing there to break-- one moving part only- a finely made piston with a spring no clicking- just remember to loosen enough when not in use to be sure it cannot come on by accident- - ALSO twice I got a 'flash' when just starting to screw the tailcap back on- so watch for that too happen..
to 'feel/see' how the switch works hold the tailcap with thumb on the spring and push the button with your finger-while holding the tailcap in your other hand. .- you can feel it move- and not very much either.

If I forgot to add some warning stickers to any plz PM and I will mail them-- comp of AixiZ Lasers houston..

These TiBs are not always shipped with sticker..but I try to send one with each.

three of these are FS
 

Attachments

  • JETLASERS TI-B beams 003.jpg
    JETLASERS TI-B beams 003.jpg
    193.1 KB · Views: 401
  • JETLASERS TI-B beams 009.jpg
    JETLASERS TI-B beams 009.jpg
    197.1 KB · Views: 427
Last edited:
What is special about the threads at the tail-end ? I see that they are squarish ( how do you say that ? ) instead of triangle form.

I don't want the ugly FDA stickers on this laser. It spoils the look.

***EDIT*** you have edited your message :)
I forgot to clean the laser before the photo shooting. You see fingerprints, dust etc.
 
Last edited:
You must log in or register to reply here.


Back
Top