Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Refurbrishing some Mobolazer ML-10's

flecom

0
Joined
Jul 25, 2010
Messages
303
Points
0
So I got me some Mobolazer ML10-250's

photo9.JPG


and some lasers

mobos.JPG


photo8.JPG


a Melles Griot 532nm DPSS doing about ~2.3W and a Lambda Pro 532nm DPSS doing about ~1.8W

photo7.JPG


mmm

the lambda pro had a lower beam height so with the assistance of a few washers and a rubber o-ring and it was quite happy in its new home

photo2.JPG


photo5.JPG


the melles unfortunately has a much higher beam-height so I used 2 MM1's to steer the beam down

photo10.JPG


photo4.JPG


finally a family shot

photo3.JPG


beam shots soon
 





flecom

0
Joined
Jul 25, 2010
Messages
303
Points
0
not yet, reason I purchased these tables was to make getting a variance easier (product is already varianced for up to 4W IIRC...) just need to enclose the one with the melles so there is no light leak

I also purchased an LT-1000 enclosure from laser show parts, for my RGB projector (pre-varianced - product report - enclosure)

I hope to start doing shows soon as a side thing (have a day job thankfully) but I want everything to be 100% legal
 




Top