My Tiny Tiny 1watt RGV build - Page 2 - Laser Pointer Forums

andy_con · 10-24-2009, 05:38 PM

i cant finish it will i get the correct dichro and the scanner psu sorted.

the scanner psu has never been used but its fooked. its ticking and only outputting 2.5v

ElektroFreak · 10-24-2009, 05:47 PM

Seems like mounting the dichro would be more of a problem than getting one that will work.. a normal pass green reflect red dichro would do it, it's just going to have to be at a different angle.

As for the PSU, is that not a warranty concern?

andy_con · 10-24-2009, 05:51 PM

why is mounting the dichro going to be a problem? it will still be at 45 degrees like all dichros??

no these scanners are a year old, its just this is the first time ive used them

ElektroFreak · 10-24-2009, 05:58 PM

definitely will be at 45 deg, but horizontally rather than vertically since the red is coming down from above. Won't this require the mount to be mounted perpendicularly to the bottom plate?

Gryphon · 10-24-2009, 06:02 PM

^yes, i was thinking the same thing, but considering how well the project has been progressing so far im sure he'll have no problem. He might end up mountning it to another plate that is then set perpendicular to the base plate.

andy_con · 10-24-2009, 06:05 PM

no no no.

something similar to this

ElektroFreak · 10-24-2009, 06:07 PM

Right..that should definitely do it..

andy_con · 10-24-2009, 06:09 PM

you can kind of see the mount in this pic

ElektroFreak · 10-24-2009, 06:14 PM

You may already know this, but since the green beam is missing the mirrors you can rotate the round module inside the heatsink of the green laser by loosening the set screw on the bottom rear of the heatsink. This is an easy way to bring the beam up a bit, and will probably out it square on the mirrors.

andy_con · 10-24-2009, 06:16 PM

dont worry there is a peice os alum to go under the green its just not there in those pics

but thanks for advice

Gryphon · 10-25-2009, 06:56 PM

I really like those "mounts" you have for the various optical elements, i take it you made those yourself.

andy_con · 10-25-2009, 07:11 PM

sure did, everything you see in those pics is hand made by me

Gryphon · 10-25-2009, 09:28 PM

^ Awesome, can't wait to see more

andy_con · 10-25-2009, 10:10 PM

dont expect any pics for at least a week due to my electronic problems keep grow

Flaminpyro · 10-25-2009, 10:26 PM

Verrry cooool Andy I hope to start mine soon. You have done a good job on the base plate and all the fixtures, Kudos man ! I would like to know where you got that replacement diode from ? keep up the good work !

Peace All...

andy_con · 10-25-2009, 11:41 PM

just got one problem sorted so only one left now.

i need a new psu for my 20k scanners, if anyone has a spare one?

replacement diode? do you mean the 808? you can get em on ebay, i brought a 1watt 808. i plan on buying a new 50mw green from aixiz and putting the 1watt 808 in, ive been told i should see results of 100-150mw of green light

Gryphon · 10-26-2009, 08:31 PM

Quote:

Originally Posted by andy_con

dont expect any pics for at least a week due to my electronic problems keep grow

Darn, i really liked the pics

andy_con · 10-26-2009, 08:45 PM

the laser has been dismantled and the alum board is at my metal place waiting for the case to be made

Gryphon · 10-26-2009, 09:12 PM

^ Nice, a custom enclosure to top it all off

andy_con · 10-27-2009, 12:20 PM

thats right

jeffd · 10-29-2009, 09:26 AM

Damn, tight build. Cant wait to see more progress pics

3zuli · 10-29-2009, 10:06 AM

omg! that laser combining system is awesome!!

Gryphon · 11-04-2009, 08:56 PM

Any word on the battle front?

andy_con · 11-04-2009, 09:29 PM

na nothing

am waiting for the case to be made and the alum base plate to be cut down to size

am currently working on another projector at the moment -

532nm
635nm
650nm
473nm
405nm

all in one projector

ElektroFreak · 11-04-2009, 09:50 PM

^I assume you're combining the reds and blues?

10-24-2009, 05:38 PM	#26
andy_con Class 3B Laser Join Date: May 2007 Posts: 2,735 Rep Power: 134	Re: My Tiny Tiny 1watt RGV build i cant finish it will i get the correct dichro and the scanner psu sorted. the scanner psu has never been used but its fooked. its ticking and only outputting 2.5v __________________

10-24-2009, 05:47 PM	#27
ElektroFreak Class 3B Laser Join Date: Nov 2008 Posts: 3,384 Rep Power: 162	Re: My Tiny Tiny 1watt RGV build Seems like mounting the dichro would be more of a problem than getting one that will work.. a normal pass green reflect red dichro would do it, it's just going to have to be at a different angle. As for the PSU, is that not a warranty concern? __________________ Laser Resources (for n00bs and veterans alike!) Sam's Laser FAQ (The Laser Bible) http://www.repairfaq.org/sam/laserfaq.htm RP Photonics Encyclopedia of Laser Physics and Technology http://www.rp-photonics.com/encyclopedia.html

10-24-2009, 05:51 PM	#28
andy_con Class 3B Laser Join Date: May 2007 Posts: 2,735 Rep Power: 134	Re: My Tiny Tiny 1watt RGV build why is mounting the dichro going to be a problem? it will still be at 45 degrees like all dichros?? no these scanners are a year old, its just this is the first time ive used them __________________

10-24-2009, 05:58 PM	#29
ElektroFreak Class 3B Laser Join Date: Nov 2008 Posts: 3,384 Rep Power: 162	Re: My Tiny Tiny 1watt RGV build definitely will be at 45 deg, but horizontally rather than vertically since the red is coming down from above. Won't this require the mount to be mounted perpendicularly to the bottom plate? __________________ Laser Resources (for n00bs and veterans alike!) Sam's Laser FAQ (The Laser Bible) http://www.repairfaq.org/sam/laserfaq.htm RP Photonics Encyclopedia of Laser Physics and Technology http://www.rp-photonics.com/encyclopedia.html

10-24-2009, 06:02 PM	#30
Gryphon Class 2M Laser Join Date: May 2009 Location: Little Italy Posts: 861 Rep Power: 94	Re: My Tiny Tiny 1watt RGV build ^yes, i was thinking the same thing, but considering how well the project has been progressing so far im sure he'll have no problem. He might end up mountning it to another plate that is then set perpendicular to the base plate. __________________ OK....I see................wait, what now? 7 Color "White" Laser B0323 at 125ma [MiniMag] B0323 at 150ma [Project Box] B0323 at 125ma [INOVA] 50mW 473nm O-Like Labby 10mW 1AAA Pocket Pointer 150mW Techlaser's [MiniMag] 18X LG at 350ma [MiniMag] 22X LG at 350ma RS Pen

10-24-2009, 06:05 PM	#31
andy_con Class 3B Laser Join Date: May 2007 Posts: 2,735 Rep Power: 134	Re: My Tiny Tiny 1watt RGV build no no no. something similar to this __________________ Last edited by andy_con; 10-24-2009 at 06:07 PM.

10-24-2009, 06:07 PM	#32
ElektroFreak Class 3B Laser Join Date: Nov 2008 Posts: 3,384 Rep Power: 162	Re: My Tiny Tiny 1watt RGV build Right..that should definitely do it.. __________________ Laser Resources (for n00bs and veterans alike!) Sam's Laser FAQ (The Laser Bible) http://www.repairfaq.org/sam/laserfaq.htm RP Photonics Encyclopedia of Laser Physics and Technology http://www.rp-photonics.com/encyclopedia.html

10-24-2009, 06:09 PM	#33
andy_con Class 3B Laser Join Date: May 2007 Posts: 2,735 Rep Power: 134	Re: My Tiny Tiny 1watt RGV build you can kind of see the mount in this pic __________________

10-24-2009, 06:14 PM	#34
ElektroFreak Class 3B Laser Join Date: Nov 2008 Posts: 3,384 Rep Power: 162	Re: My Tiny Tiny 1watt RGV build You may already know this, but since the green beam is missing the mirrors you can rotate the round module inside the heatsink of the green laser by loosening the set screw on the bottom rear of the heatsink. This is an easy way to bring the beam up a bit, and will probably out it square on the mirrors. __________________ Laser Resources (for n00bs and veterans alike!) Sam's Laser FAQ (The Laser Bible) http://www.repairfaq.org/sam/laserfaq.htm RP Photonics Encyclopedia of Laser Physics and Technology http://www.rp-photonics.com/encyclopedia.html

10-24-2009, 06:16 PM	#35
andy_con Class 3B Laser Join Date: May 2007 Posts: 2,735 Rep Power: 134	Re: My Tiny Tiny 1watt RGV build dont worry there is a peice os alum to go under the green its just not there in those pics but thanks for advice __________________

10-25-2009, 06:56 PM	#36
Gryphon Class 2M Laser Join Date: May 2009 Location: Little Italy Posts: 861 Rep Power: 94	Re: My Tiny Tiny 1watt RGV build I really like those "mounts" you have for the various optical elements, i take it you made those yourself. __________________ OK....I see................wait, what now? 7 Color "White" Laser B0323 at 125ma [MiniMag] B0323 at 150ma [Project Box] B0323 at 125ma [INOVA] 50mW 473nm O-Like Labby 10mW 1AAA Pocket Pointer 150mW Techlaser's [MiniMag] 18X LG at 350ma [MiniMag] 22X LG at 350ma RS Pen

10-25-2009, 07:11 PM	#37
andy_con Class 3B Laser Join Date: May 2007 Posts: 2,735 Rep Power: 134	Re: My Tiny Tiny 1watt RGV build sure did, everything you see in those pics is hand made by me __________________

10-25-2009, 09:28 PM	#38
Gryphon Class 2M Laser Join Date: May 2009 Location: Little Italy Posts: 861 Rep Power: 94	Re: My Tiny Tiny 1watt RGV build ^ Awesome, can't wait to see more __________________ OK....I see................wait, what now? 7 Color "White" Laser B0323 at 125ma [MiniMag] B0323 at 150ma [Project Box] B0323 at 125ma [INOVA] 50mW 473nm O-Like Labby 10mW 1AAA Pocket Pointer 150mW Techlaser's [MiniMag] 18X LG at 350ma [MiniMag] 22X LG at 350ma RS Pen

10-25-2009, 10:10 PM	#39
andy_con Class 3B Laser Join Date: May 2007 Posts: 2,735 Rep Power: 134	Re: My Tiny Tiny 1watt RGV build dont expect any pics for at least a week due to my electronic problems keep grow __________________

10-25-2009, 10:26 PM	#40
Flaminpyro Class 3R Laser Join Date: May 2009 Location: west central Oregon Posts: 1,224 Rep Power: 110	Re: My Tiny Tiny 1watt RGV build Verrry cooool Andy I hope to start mine soon. You have done a good job on the base plate and all the fixtures, Kudos man ! I would like to know where you got that replacement diode from ? keep up the good work ! Peace All... __________________ Why burn up hydrocarbons with a lighter when you have 400mW+ of BLU-RAY White Fusion 191mW Viasho 532nm 500mW TANK007Cu8X DFW 397mW CNI pen 532nm 84mW The Violet Pip Squeek 45mW 12X diode _____________________________________ LaserBee I LPM LOOKING FOR A HOST WITH PERFECT HEAT SINKING order your TANK007 Cu today ! http://laserpointerforums.com/f39/fs...kit-43865.html

10-25-2009, 11:41 PM	#41
andy_con Class 3B Laser Join Date: May 2007 Posts: 2,735 Rep Power: 134	Re: My Tiny Tiny 1watt RGV build just got one problem sorted so only one left now. i need a new psu for my 20k scanners, if anyone has a spare one? replacement diode? do you mean the 808? you can get em on ebay, i brought a 1watt 808. i plan on buying a new 50mw green from aixiz and putting the 1watt 808 in, ive been told i should see results of 100-150mw of green light __________________

10-26-2009, 08:45 PM	#43
andy_con Class 3B Laser Join Date: May 2007 Posts: 2,735 Rep Power: 134	Re: My Tiny Tiny 1watt RGV build the laser has been dismantled and the alum board is at my metal place waiting for the case to be made __________________

10-26-2009, 09:12 PM	#44
Gryphon Class 2M Laser Join Date: May 2009 Location: Little Italy Posts: 861 Rep Power: 94	Re: My Tiny Tiny 1watt RGV build ^ Nice, a custom enclosure to top it all off __________________ OK....I see................wait, what now? 7 Color "White" Laser B0323 at 125ma [MiniMag] B0323 at 150ma [Project Box] B0323 at 125ma [INOVA] 50mW 473nm O-Like Labby 10mW 1AAA Pocket Pointer 150mW Techlaser's [MiniMag] 18X LG at 350ma [MiniMag] 22X LG at 350ma RS Pen

10-27-2009, 12:20 PM	#45
andy_con Class 3B Laser Join Date: May 2007 Posts: 2,735 Rep Power: 134	Re: My Tiny Tiny 1watt RGV build thats right __________________

10-29-2009, 09:26 AM	#46
jeffd Class 2 Laser Join Date: Jun 2009 Location: Tulsa Oklahoma Posts: 469 Rep Power: 2	Re: My Tiny Tiny 1watt RGV build Damn, tight build. Cant wait to see more progress pics __________________ Laserless again

10-29-2009, 10:06 AM	#47
3zuli Class 1M Laser Join Date: May 2009 Location: SVK Posts: 201 Rep Power: 6	Re: My Tiny Tiny 1watt RGV build omg! that laser combining system is awesome!! __________________ <<that's not me my lasers: DX 5mW@532nm DX 50mW@532nm lots of 5mW red PHR803T - almost done - need host

11-04-2009, 08:56 PM	#48
Gryphon Class 2M Laser Join Date: May 2009 Location: Little Italy Posts: 861 Rep Power: 94	Re: My Tiny Tiny 1watt RGV build Any word on the battle front? __________________ OK....I see................wait, what now? 7 Color "White" Laser B0323 at 125ma [MiniMag] B0323 at 150ma [Project Box] B0323 at 125ma [INOVA] 50mW 473nm O-Like Labby 10mW 1AAA Pocket Pointer 150mW Techlaser's [MiniMag] 18X LG at 350ma [MiniMag] 22X LG at 350ma RS Pen

11-04-2009, 09:29 PM	#49
andy_con Class 3B Laser Join Date: May 2007 Posts: 2,735 Rep Power: 134	Re: My Tiny Tiny 1watt RGV build na nothing am waiting for the case to be made and the alum base plate to be cut down to size am currently working on another projector at the moment - 532nm 635nm 650nm 473nm 405nm all in one projector __________________

11-04-2009, 09:50 PM	#50
ElektroFreak Class 3B Laser Join Date: Nov 2008 Posts: 3,384 Rep Power: 162	Re: My Tiny Tiny 1watt RGV build ^I assume you're combining the reds and blues? __________________ Laser Resources (for n00bs and veterans alike!) Sam's Laser FAQ (The Laser Bible) http://www.repairfaq.org/sam/laserfaq.htm RP Photonics Encyclopedia of Laser Physics and Technology http://www.rp-photonics.com/encyclopedia.html

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode