Welcome to Laser Pointer Forums - discuss green laser pointers, blue laser pointers, and all types of lasers

LPF Donation via Stripe | LPF Donation - Other Methods

Links below open in new window

ArcticMyst Security by Avery

Laser show help

S

smzy322

0
Joined
Jan 26, 2011
Messages
60
Points
8
I ordered a SHINP CL-16RGY and received it today. It seems that when its trying to make yellow the red and green don't mix instead are right next to each other.
I don't have really any experience with projectors as this is my first one. Is this something I could attempt to repair myself?
 





bennett326

bennett326

0
Joined
May 10, 2011
Messages
1,878
Points
48
open it up take some pics the dichros might just be out of alignment

EDIT can you also make it where just the lasers are on not the galvos so all you see is a beam
 
Last edited:
S

smzy322

0
Joined
Jan 26, 2011
Messages
60
Points
8
Hope one of these help
b6wqrq.jpg

2j2suid.jpg

axy782.jpg

357ohgx.jpg
 
bennett326

bennett326

0
Joined
May 10, 2011
Messages
1,878
Points
48
thanks for the pics so i only see two lasers and i assume there is one more the optics that are on those mounts are the dichros

also if you can get a beam shot(lasers on but not scanning a image) that will probably help i bet it just needs alignment
 
S

smzy322

0
Joined
Jan 26, 2011
Messages
60
Points
8
Its a RGY so it only has a red and green laser and they combine to make yellow. This is a cheap unit and I dont think I can get a beam shot without it moving
 
bennett326

bennett326

0
Joined
May 10, 2011
Messages
1,878
Points
48
smzy322 said:
Its a RGY so it only has a red and green laser and they combine to make yellow. This is a cheap unit and I dont think I can get a beam shot without it moving
Click to expand...

ok so you cant just turn it on and not project a image?
 
S

smzy322

0
Joined
Jan 26, 2011
Messages
60
Points
8
No right when you plug it in it starts to do its thing if there's is a way I don't know it unfortunately and i don't see anything about it in its terrible manual either.
 
bennett326

bennett326

0
Joined
May 10, 2011
Messages
1,878
Points
48
well im 99% sure the dichro just needs to be aligned but if you cant stop it from scanning a image it will be incredibly difficult to do so

BTW will the projector run if it is open like shown in the photos
 
bennett326

bennett326

0
Joined
May 10, 2011
Messages
1,878
Points
48
ahh good this way you can see for sure. so put it on a pattern or beam show whatever that is all yellow if possible then look inside.

now you should see what i have in the attached picture.(the red and green could be switched idk)

but what i think you will see is the red and green side by side

check that out for me
 

Attachments

  • 357ohgx.jpg
    357ohgx.jpg
    118.4 KB · Views: 554
T

Things

0
Joined
May 1, 2007
Messages
7,517
Points
0
Ahh, the good 'ol crappy chinese dichro mounts. About the only way you can try realign these is to remove the glue and re position it yourself, or if the alignment is only off by a tiny bit, you can try gently bending it.
 
bennett326

bennett326

0
Joined
May 10, 2011
Messages
1,878
Points
48
it looks super green heavy but other than that if it misaligned its not by too much

@things it gonna be really hard for him to realign if he cant get the galvos off with the lasers on

thous mounts look like the screw in if you loosen em a bit maybe you can move them around just a little
 
bennett326

bennett326

0
Joined
May 10, 2011
Messages
1,878
Points
48
can you get a less over-exposed picture and is it really that green heavy in person ?
 
S

smzy322

0
Joined
Jan 26, 2011
Messages
60
Points
8
I think I've only made things worse. Can anyone fix this? I will pay them for their time. Instead of sending this all the way back to china
 
You must log in or register to reply here.




Top